Image Handler 3 Support Thread (for ZC v1.3.9)

[hara]

By default, additional images must contain/start with, the exact same as the main image - then use an underscore - then end with the same image format.

Example
Main product image name: HP63.gif
Additional image name: HP63_red-silver.gif

Any modules using additional images will go by the above.

Wait, I followed what you said but still got same problem with error:

Error!

Unable to determine the page link!

Function used:

zen_href_link('', '', 'NONSSL')

[hara]

I think I found the problem. IH3 requires must add/upload the small image first, then the option either large or medium. And still need to follow ZC original rule to add _MED and _LRG for the option images.
Am I right?

[clydejones]

I think I found the problem. IH3 requires must add/upload the small image first, then the option either large or medium. And still need to follow ZC original rule to add _MED and _LRG for the option images.
Am I right?

using IH3 I upload 1 image.

myimage.jpg which is say (500px x 500px)

IH3 will now handle creating the small and medium images for me.
small images (125px x 125px) medium images (250px x 250 px)

no need to add any _MED or _LRG options at all.

If I want an additional image for that product I use IH3 to upload an image and IH3 creates myimage_01.jpg for me.

[hara]

using IH3 I upload 1 image.

myimage.jpg which is say (500px x 500px)

IH3 will now handle creating the small and medium images for me.
small images (125px x 125px) medium images (250px x 250 px)

no need to add any _MED or _LRG options at all.

If I want an additional image for that product I use IH3 to upload an image and IH3 creates myimage_01.jpg for me.

Yes, I understand. My point is I have to upload an image on Default image file box first when I want additional image. If you upload additional image on the option box first, the error appear. Moreover, I try to add 2nd additional image but it looks like replacing the first additional image. (only myimage_01.jpg alone, myimage_02.jpg not appear). Only one additional image appear. So far I can't find where to setup from.

[DarkAngel]

Yes, I understand. My point is I have to upload an image on Default image file box first when I want additional image. If you upload additional image on the option box first, the error appear. Moreover, I try to add 2nd additional image but it looks like replacing the first additional image. (only myimage_01.jpg alone, myimage_02.jpg not appear). Only one additional image appear. So far I can't find where to setup from.

ok you are right in doing it that way.

you DO NOT add the additional image in the same button that you did the main image.

This is the way I do mine since occasionally I forgot and took out my main image also

If you upload to the main images folder (server/store folder/images (where included in located)

1. if more that one image is for the the product then create them all prior to uploading to the server.

product = red hot textures

primary image name= redhot.jpg
additional images= redhot_01.jpg and so forth until you have them all named with numbers

2. upload to the server

3. in product description area of admin go to the bottom where you would have normally entered the image....in the "Or, select an existing image file from server, filename:"

then choose from the drop down menu "main directory"

in the box next to filename: write the name of the main image... redhot.jpg

3. click preview

on the next page if it shows up then click update...if there is a problem then hit the back button to fix.


or if you use the images area of IH3:

after you enter the first image then click on the "new file button to navigate to the second image for that product

using the "new file" button for each new image for that product. IH3 will do the renaming on its own and wll show you each image.

If you click the edit then you will remove the one you added and replace with the next one.

I hope that makes sense

[andrewnguyen]

We actually can't help you with issues related to another mod.. (Sorry..) However if I had to hazzard a guess I'd say that the Dual Pricing mod modifies some of the same files used by IH3 and you are wiping out the IH3 changes because you are not merging these modifications. Using a file merging program you need to merge the changes between any files Dual Pricing has in common with IH3.. I'm afraid we can't be of much more help as the issue here is not IH3 at all.. It is an incorrect install of your Dual Pricing mod..

Hi DivaVocals,

Thank you for your help in this thread post #238.
I've use a merge program as you suggested and everything works perfetc.

Thanks heaps.
Andrew

[gaius]

I am using Zen Cart 1.3.9 I just installed Image Handler 3, and am having a problem that seems normal. Here's a link to my site: http://theindigopath.com/buyart/

I've been searching the forums and reading through the readme and configuration stuff the past couple days but can't seem to figure this out.

I can't get the watermark to work. My config settings are below. I also checked to be sure the images were in the correct place. And I tried clearing the bmz_cache folder. What should I try next?



Small Image Width 250 Info
Small Image Height 250 Info
Heading Image Width - Admin 57 Info
Heading Image Height - Admin 40 Info
Subcategory Image Width 250 Info
Subcategory Image Height 250 Info
Calculate Image Size true Info
Image Required true Info
Image - Shopping Cart Status 1 Info
Image - Shopping Cart Width 50 Info
Image - Shopping Cart Height 40 Info
Category Icon Image Width - Product Info Pages 57 Info
Category Icon Image Height - Product Info Pages 40 Info
Top Subcategory Image Width 150 Info
Top Subcategory Image Height 85 Info
Product Info - Image Width 350 Info
Product Info - Image Height 350 Info
Product Info - Image Medium Suffix _MED Info
Product Info - Image Large Suffix _LRG Info
Product Info - Number of Additional Images per Row 3 Info
Image - Product Listing Width 250 Info
Image - Product Listing Height 250 Info
Image - Product New Listing Width 250 Info
Image - Product New Listing Height 250 Info
Image - New Products Width 250 Info
Image - New Products Height 250 Info
Image - Featured Products Width 250 Info
Image - Featured Products Height 250
Image - Product All Listing Width 250 Info
Image - Product All Listing Height 250 Info
Product Image - No Image Status 1 Info
Product Image - No Image picture no_picture.gif Info
Image - Use Proportional Images on Products and Categories 1 Info
IH resize images yes Info
IH small images filetype no_change Info
IH small images background 255:255:255 Info
IH small images compression quality 85 Info
IH small images watermark no Info
IH small images zoom on hover yes Info
IH small images zoom on hover size Medium Info
IH medium images filetype no_change Info
IH medium images background 255:255:255 Info
IH medium images compression quality 85 Info
IH medium images watermark yes Info
IH large images filetype no_change Info
IH large images background 255:255:255 Info
IH large images compression quality 85 Info
IH large images watermark yes Info
IH large images maximum width 750 Info
IH large images maximum height 550 Info
IH watermark gravity Center Info

[DarkAngel]

I am using Zen Cart 1.3.9 I just installed Image Handler 3, and am having a problem that seems normal. Here's a link to my site: http://theindigopath.com/buyart/

I've been searching the forums and reading through the readme and configuration stuff the past couple days but can't seem to figure this out.

I can't get the watermark to work. My config settings are below. I also checked to be sure the images were in the correct place. And I tried clearing the bmz_cache folder. What should I try next?



Small Image Width 250 Info
Small Image Height 250 Info
Heading Image Width - Admin 57 Info
Heading Image Height - Admin 40 Info
Subcategory Image Width 250 Info
Subcategory Image Height 250 Info
Calculate Image Size true Info
Image Required true Info
Image - Shopping Cart Status 1 Info
Image - Shopping Cart Width 50 Info
Image - Shopping Cart Height 40 Info
Category Icon Image Width - Product Info Pages 57 Info
Category Icon Image Height - Product Info Pages 40 Info
Top Subcategory Image Width 150 Info
Top Subcategory Image Height 85 Info
Product Info - Image Width 350 Info
Product Info - Image Height 350 Info
Product Info - Image Medium Suffix _MED Info
Product Info - Image Large Suffix _LRG Info
Product Info - Number of Additional Images per Row 3 Info
Image - Product Listing Width 250 Info
Image - Product Listing Height 250 Info
Image - Product New Listing Width 250 Info
Image - Product New Listing Height 250 Info
Image - New Products Width 250 Info
Image - New Products Height 250 Info
Image - Featured Products Width 250 Info
Image - Featured Products Height 250
Image - Product All Listing Width 250 Info
Image - Product All Listing Height 250 Info
Product Image - No Image Status 1 Info
Product Image - No Image picture no_picture.gif Info
Image - Use Proportional Images on Products and Categories 1 Info
IH resize images yes Info
IH small images filetype no_change Info
IH small images background 255:255:255 Info
IH small images compression quality 85 Info
IH small images watermark no Info
IH small images zoom on hover yes Info
IH small images zoom on hover size Medium Info
IH medium images filetype no_change Info
IH medium images background 255:255:255 Info
IH medium images compression quality 85 Info
IH medium images watermark yes Info
IH large images filetype no_change Info
IH large images background 255:255:255 Info
IH large images compression quality 85 Info
IH large images watermark yes Info
IH large images maximum width 750 Info
IH large images maximum height 550 Info
IH watermark gravity Center Info

looks like your settings are ok but what version zencart are you using and also what version of lightbox and which one?

did you install IH3 from an upgrade or fresh installation?

some of your images have a watermark but not all of them so not sure of much here...sorry

[DivaVocals]

If I had to guess, it looks like you added the watermark settings after IH3 generated your bmz_cache images. I suggest using your FTP too and manually removing all the cache FOLDERS in the bmz_cache folder. (leave the 2 files there in place) clear your browser cache and see if you don't see watermarked images then..

I am using Zen Cart 1.3.9 I just installed Image Handler 3, and am having a problem that seems normal. Here's a link to my site: http://theindigopath.com/buyart/

I've been searching the forums and reading through the readme and configuration stuff the past couple days but can't seem to figure this out.

I can't get the watermark to work. My config settings are below. I also checked to be sure the images were in the correct place. And I tried clearing the bmz_cache folder. What should I try next?



Small Image Width 250 Info
Small Image Height 250 Info
Heading Image Width - Admin 57 Info
Heading Image Height - Admin 40 Info
Subcategory Image Width 250 Info
Subcategory Image Height 250 Info
Calculate Image Size true Info
Image Required true Info
Image - Shopping Cart Status 1 Info
Image - Shopping Cart Width 50 Info
Image - Shopping Cart Height 40 Info
Category Icon Image Width - Product Info Pages 57 Info
Category Icon Image Height - Product Info Pages 40 Info
Top Subcategory Image Width 150 Info
Top Subcategory Image Height 85 Info
Product Info - Image Width 350 Info
Product Info - Image Height 350 Info
Product Info - Image Medium Suffix _MED Info
Product Info - Image Large Suffix _LRG Info
Product Info - Number of Additional Images per Row 3 Info
Image - Product Listing Width 250 Info
Image - Product Listing Height 250 Info
Image - Product New Listing Width 250 Info
Image - Product New Listing Height 250 Info
Image - New Products Width 250 Info
Image - New Products Height 250 Info
Image - Featured Products Width 250 Info
Image - Featured Products Height 250
Image - Product All Listing Width 250 Info
Image - Product All Listing Height 250 Info
Product Image - No Image Status 1 Info
Product Image - No Image picture no_picture.gif Info
Image - Use Proportional Images on Products and Categories 1 Info
IH resize images yes Info
IH small images filetype no_change Info
IH small images background 255:255:255 Info
IH small images compression quality 85 Info
IH small images watermark no Info
IH small images zoom on hover yes Info
IH small images zoom on hover size Medium Info
IH medium images filetype no_change Info
IH medium images background 255:255:255 Info
IH medium images compression quality 85 Info
IH medium images watermark yes Info
IH large images filetype no_change Info
IH large images background 255:255:255 Info
IH large images compression quality 85 Info
IH large images watermark yes Info
IH large images maximum width 750 Info
IH large images maximum height 550 Info
IH watermark gravity Center Info

[DivaVocals]

Hi DivaVocals,

Thank you for your help in this thread post #238.
I've use a merge program as you suggested and everything works perfetc.

Thanks heaps.
Andrew

Glad that you got it all worked out..