Image Handler 2 (for ZC v1.3.8 ONLY) Support

Printable View

Show 100 post(s) from this thread on one page

26 Nov 2007, 08:41 PM
Veronika7747

Re: Image Handler 2 Support

That's what I did, but what folder should I specify for the largest image to go to? Also why does not the image show on all pages?
26 Nov 2007, 09:46 PM
puggy

Re: Image Handler 2 Support

Quote:

Originally Posted by testuser

The size of the hover image is dependent on the dimensions of your Product Info Image dimensions found under Configuration :: Images of your ZC Admin area.

:blink: Could you be more specific?
I uploaded 3 images a large, a medium and a small like what I read was suppose to due. Now I go into Configuration :: Images and there is no place to set the size, I thought this was done by the images I uploaded?
27 Nov 2007, 02:32 AM
tophand

Re: Image Handler 2 Support

Quote:

Originally Posted by cs_jono

If you go to say
clevershoppers (dot) com/collectibles-343/ashton-drake-galleries-362/

You'll notice when you go over the red zoom button the image is so zoomed in that it is being cut off at the top or at the side or at the bottom...and I'm wanting to make the image smaller so it doesn't do that.

Admin--> Configuration-->images
Adjust the values for "Image- Product Listing".

M
27 Nov 2007, 02:35 AM
tophand

Re: Image Handler 2 Support

Quote:

Originally Posted by Veronika7747

That's what I did, but what folder should I specify for the largest image to go to? Also why does not the image show on all pages?

A link to your site will help us help you.

Folder = images

M
27 Nov 2007, 03:10 AM
tophand

Re: Image Handler 2 Support

Quote:

Originally Posted by puggy

:blink: Could you be more specific?
I uploaded 3 images a large, a medium and a small like what I read was suppose to due. Now I go into Configuration :: Images and there is no place to set the size, I thought this was done by the images I uploaded?

Where did you read this?
This is not in the manual for Image handler as with IH you "only" need to upload 1 image (the largest size you want to use). IH will take care of the rest of the sizes needed.
Do you Image Handler installed?

M
27 Nov 2007, 03:10 AM
testuser

Re: Image Handler 2 Support
Quote:

Originally Posted by puggy

:blink: Could you be more specific?
I uploaded 3 images a large, a medium and a small like what I read was suppose to due. Now I go into Configuration :: Images and there is no place to set the size, I thought this was done by the images I uploaded?

You seem to be making it more complicated than it actually is ... When you add a product and it asks for the product image, simply upload your large image here and Image Handler will resize that image according to the settings you have under Configuration :: Images. There is no need to upload three different images unless you need the images to be unique. EXAMPLE - your small image needs a border around it, or you want to show 4 bottles of something in your product listing image, and one big bottle for your product info image.

Quote:

Originally Posted by cs_jono

If you go to say
clevershoppers (dot) com/collectibles-343/ashton-drake-galleries-362/

You'll notice when you go over the red zoom button the image is so zoomed in that it is being cut off at the top or at the side or at the bottom...and I'm wanting to make the image smaller so it doesn't do that.

The size of the hover is dependent upon the dimensions of:
- Product Info - Image Width
- Product Info - Image Height
You can find these under Configuration ::Images as well.

Quote:

Originally Posted by Veronika7747

That's what I did, but what folder should I specify for the largest image to go to? Also why does not the image show on all pages?

You should have to specify a large image folder, IH handles this for you ... refer to the first reply in this post.
27 Nov 2007, 03:30 AM
testuser

Re: Image Handler 2 Support

Quote:

Originally Posted by testuser

You should have to specify a large image folder, IH handles this for you ... refer to the first reply in this post.

Should read:

You shouldn't have to specify a large image folder, IH handles this for you ... refer to the first reply in this post.
27 Nov 2007, 04:00 PM
cs_jono

Re: Image Handler 2 Support

Quote:

Originally Posted by tophand

Admin--> Configuration-->images
Adjust the values for "Image- Product Listing".

M

Thanks for your help! Just for future reference for what I was looking to do i had to adjust the IH Large Image Maximum Width and IH Large Image Maximum Height. Thanks for pointing me towards the right direction though!
27 Nov 2007, 05:37 PM
Veronika7747

Re: Image Handler 2 Support

Quote:

Originally Posted by tophand

A link to your site will help us help you.

Folder = images

M

Sorry, this is my 1st week. I am still developing only on my laptop. I'll keep trying.'
Thanks
27 Nov 2007, 06:02 PM
puggy

Re: Image Handler 2 Support

Quote:

Originally Posted by testuser

You seem to be making it more complicated than it actually is ... When you add a product and it asks for the product image, simply upload your large image here and Image Handler will resize that image according to the settings you have under Configuration :: Images. There is no need to upload three different images unless you need the images to be unique. EXAMPLE - your small image needs a border around it, or you want to show 4 bottles of something in your product listing image, and one big bottle for your product info image.

Okay I have an image that I uploaded that is 450x 450 when I hover over it is only a small percentage of the thumb. How Do I fix?

Show 100 post(s) from this thread on one page