Image Handler 2 (for ZC v1.3.8 ONLY) Support

Printable View

Show 100 post(s) from this thread on one page

13 Jan 2011, 01:21 AM
DivaVocals

Re: Image Handler 2 Support

Looks like you do have it all sorted out.. Your small, medium and large images are being served up from the bmz_cache folder as they should be.. Good job!:smile:

Going forward make sure you read the WHOLE readme document before installing any module.. I make this a habit before I even begin any install.. This way if there's anything I need to know outside of the normal install instructions, I'm ready..

Quote:

Originally Posted by uruharacosplay

I feel so stupid. :oops:

I didn't even realize there was anything I needed to do in the Configuration -> Images tab.

It works like a charm! Thank you so VERY much! :clap:
13 Jan 2011, 01:25 AM
DivaVocals

Re: Image Handler 2 Support BMZ_cache no read

Quote:

Originally Posted by giancalr

Does anyone know why the images created in the folder with permissions set to 755 bmz_cache not read?
images are created with a path:
www.exemple.com/bmz_cache/4/ksfjsjfjsf44656.jpg
and are read:
www.exemple.com/bmz_cache4ksfjsjfjsf44656.jpg
of course nothing appears on the site, now I set folder creation BMZ to 655 to display images and operate imagehover. thanks

A real link to your site would help..
13 Jan 2011, 01:29 AM
DivaVocals

Re: Image Handler 2 Support

Quote:

Originally Posted by nolsowski

How do I get it so it points to that folder? I have 1100 + products uploaded with pics is there a way I can rename the folders and the pics will still show up without having to re upload them all again?

Quote:

Originally Posted by nolsowski

I think I have it now. I set the permissions to 777 on the bmz_cache folder instead of the 755.

Nope still not working correctly.. NONE of your medium or large images are being served up from the bmz_cache folder..Re-read the readme document again and go through ALL of the image settings.. It appears that you are missing a setting which is causing IH2 to not properly serve up the images.. (and I don't know which one.. you'll need to compare the suggested settings in the readme against yours to see what got skipped)

BTW you don't have Image Manager installed as well do you?? Because Image Manager and IH2 cannot be installed together.. and I believe the Image Manager readme says as much..
13 Jan 2011, 10:04 AM
giancalr

Re: Image Handler 2 Support BMZ_cache no read

Quote:

Originally Posted by DivaVocals

A real link to your site would help..

my site is www.erboristeriabio.com
13 Jan 2011, 02:26 PM
DivaVocals

Re: Image Handler 2 Support BMZ_cache no read
Quote:

Originally Posted by giancalr

my site is www.erboristeriabio.com

We need the USUAL compliment of information that we always ask for here..
- Link to your site (specifically links DIRECTLY to the products which work correctly AND links to the ones that don't -- please don't ask folks to fish through your site looking for the issue)
- What are your image settings??
Providing this when you post helps cut down on back and forth guess sessions.. Much better if you provide FULL information up front.. Thanks:wink2:
13 Jan 2011, 04:32 PM
giancalr

Re: Image Handler 2 Support BMZ_cache no read
Quote:
Originally Posted by DivaVocals

We need the USUAL compliment of information that we always ask for here..

Link to your site (specifically links DIRECTLY to the products which work correctly AND links to the ones that don't -- please don't ask folks to fish through your site looking for the issue)
What are your image settings??

Providing this when you post helps cut down on back and forth guess sessions.. Much better if you provide FULL information up front.. Thanks:wink2:
the problem is in all the images, the configurations of HI are standard, the images are read as follows:
http://www.erboristeriabio.com/bmz_c...age.100x56.png
Instead of this:
http://www.erboristeriabio.com/bmz_c...96cc4e96bcfdf8
13 Jan 2011, 04:50 PM
DivaVocals

Re: Image Handler 2 Support BMZ_cache no read

Quote:

Originally Posted by giancalr

the problem is in all the images, the configurations of HI are standard, the images are read as follows:
http://www.erboristeriabio.com/bmz_c...age.100x56.png
Instead of this:
http://www.erboristeriabio.com/bmz_c...96cc4e96bcfdf8

It looks like you have IH2 turned off in your store. I'd suggest double checking your file merges between IH2 and your lightbox contribution.. It's possible that something went wrong in that setup.. Otherwise double check you image settings against the suggested settings in the readme, and make sure that soemthing didn't get skipped..
13 Jan 2011, 04:54 PM
giancalr

Re: Image Handler 2 Support BMZ_cache no read

Quote:

Originally Posted by DivaVocals

It looks like you have IH2 turned off in your store. I'd suggest double checking your file merges between IH2 and your lightbox contribution.. It's possible that something went wrong in that setup.. Otherwise double check you image settings against the suggested settings in the readme, and make sure that soemthing didn't get skipped..

in my test site is working fine www.erboristeriabio.com/zen139 HI Lightbox who now live on the site Hi I turned off because if you do not see no more pictures.
13 Jan 2011, 05:12 PM
DivaVocals

Re: Image Handler 2 Support BMZ_cache no read

Quote:

Originally Posted by giancalr

in my test site is working fine www.erboristeriabio.com/zen139 HI Lightbox who now live on the site Hi I turned off because if you do not see no more pictures.

If it's working on your test site then something went wrong when moving it to the live site.. this is not really an IH2 issue at all.. It is more likely that the REAL issue you have is that something went wrong in your transfer of files to your live site which is causing IH2 to not function on your live store.. This is not caused by IH2, rather IH2 is ILLUMINATING another issue you have..

I suggest doing a careful comparison of the files and database in your test store and your live store.. Make sure your configuration file for the live store refelects the correct paths. (for example you may have inadvertetnly skipped a required "/" in your configure.php file).

I wish I could offer more, but at this point I think it's clear that this is NOT an issue with IH2 at all..
13 Jan 2011, 06:29 PM
giancalr

Re: Image Handler 2 Support BMZ_cache no read

Quote:

Originally Posted by DivaVocals

If it's working on your test site then something went wrong when moving it to the live site.. this is not really an IH2 issue at all.. It is more likely that the REAL issue you have is that something went wrong in your transfer of files to your live site which is causing IH2 to not function on your live store.. This is not caused by IH2, rather IH2 is ILLUMINATING another issue you have..

I suggest doing a careful comparison of the files and database in your test store and your live store.. Make sure your configuration file for the live store refelects the correct paths. (for example you may have inadvertetnly skipped a required "/" in your configure.php file).

I wish I could offer more, but at this point I think it's clear that this is NOT an issue with IH2 at all..

I deleted all the files, input from the beginning, not working, or something you need to set some configuration file php.ini or server,
in the configure file is ok.

Show 100 post(s) from this thread on one page