Printable View
With regards to IH4, the auto-install detects the current template and copies the appropriate files to the correct override folders.. but this only works IF the installation instructions are followed and folks don't cherry pick what files THEY think are important..Quote:
Originally Posted by dbltoe
No clue.. I've never used this slideshow.. If there are files modified by this slideshow that are also modified by IH4, then it's possible that the code for the two needs to be merged properly..Quote:
Originally Posted by fanisme
Yep...Quote:
Originally Posted by DivaVocals
Even with the auto-install is used, it appeared that the OP was not familiar with the terminology.Quote:
But I really can't find includes/modules/YOUR_TEMPLATE/ untill installed zen lightbox which has includes/modules/YOUR_TEMPLATE/ in its installing folder.
Yep and that's exactly why I referred the OP back to the original install instructions where this is covered in pretty good detail. But I'm open to ideas if this needs to be worded differently for better clarity..Quote:
Originally Posted by dbltoe
I installed the image-handler4
How to change the file？
Can be achieved
Attachment 12501
Since you provided NO DETAILS here, it's hard to answer your question.. Since you are leaving folks to GUESS what you mean by "how to change the file", let me lob a guess answer at you.. if you are asking can you create a slider with Image Handler, the answer is no, and I will kindly refer you to the first post of this support thread or the readme where it is explained what Image Handler does (and more importantly) and does not do.Quote:
Originally Posted by zch0071
Hi DV and friends
I was hoping not to have to post here :-( I've read, read again, scratched, read again to be sure, tweaked, uploaded, flicked on, off, etc etc and cannot get this working as expected.
I've installed IH4 using defaults on a developing Zen v1.5.1 install. No conflicts with files of note (one or two that were never modified-overwritten with IH4 versions). Several add-ons installed but nothing directly affecting images yet--seemed wise for IH4 to be the first and base for image related add-ons. IIRC/AFAIK, I'm not using any jscript or such with the add-ons.
Previously (with existing store) I've generated all images and uploaded to respective directories; ../images/nameX../ ../medium/nameX/.. ../large/nameX/.. for each manufacturer and used suffixes; _m, _l for medium and large versions. All .jpg. EP for bulk/mass product manipulation. FTP for images uploads. Almost all products (1'000's) have images and most have multiple images, sometimes up to 10.
For testing purposes on this new v1.5.1 install, I just dumped a few 'handfuls' of the small images for a few manufacturers. All working as expected.
For testing IH4, I have uploaded renamed large images directly to the relative images directory. Full size but no suffix.
Problem scenario 1:
1. No additional images (thumbnails) displayed despite images present - both existing and one or two products where I have specified/uploaded images via IH4 tools (not an option for me going forward, btw - not feasible for the number of images I deal with regularly).
2. Watermark on large image only (should be medium too)
3. No hover effects
Image - Use Proportional Images on Products and Categories = 1
For this test product...
- Full size images (x3) in 'small' directory i.e., ../images/nameX/
- No images of same name/model in 'medium' and 'large' directories.
Now, before you jump... the following configuration setting changes things...
Image - Use Proportional Images on Products and Categories = 0
SAME - Full size images (x3) in 'small' directory i.e., ../images/nameX/
SAME - No images of same name/model in 'medium' and 'large' directories.
1. Additional images present (full size displays on click too)
2. No watermarks
3. No hover effects
4. Medium image reduced quality compared to previous settings (crisp but not smooth lines). Thumbnail images also a little more jagged than expected (crisp but not smooth lines).
5. Medium image on click displays blank pop-up window i.e., no large image.
Other config settings...
Originally had my previous settings for small and medium sizes set (e.g., 100x80, etc) but now have used your example config settings (width only for small, medium and large [1200 for large]) and exactly the same result.
[edit: GD 2.0.34 installed according to server info]
I intended to write up other scenario details but my head is spinning now reproducing the settings and documenting the results.:wacko:
I have my fingers-crossed that you will be able to say 'Oh, flick this and click that... and all will be good', but I don't have much faith in that. ;-)
Cheers
GAM
perhaps it's because it's early, but in this very long post I'm not truly clear on what the issue is.. and you haven't provided a link to your site.. (as we suggest ALL the time in this support thread).. I'm not entirely clear on what you mean by "Full size but no suffix". Does this refer to the filename extension or something else..Quote:
Originally Posted by GAM
I gather that there are several issues (watermarks, image hover, image quality issue with medium images, no large popup)
Suggest going back to the readme.. review the configuration and usage tabs.. assuming you have this installed correctly (and since you've provided none of the information suggested in the readme or even on the first page of this post we can only guess that you do have this installed correctly) there are specific configuration settings required for the image hover to work.. There are other settings that may help with the image quality issues. Bottomline it may indeed be a button to "flick". Sounds like your admin settings need to be adjusted, and the usage & configuration tabs will provide the info you need..
LOL. No offence intended here, but I'm with you, it is hard to tell exactly what the issue is. This is just GAM's 'style' of bug reporting, it is all perfectly clear in his head, but it doesn't always translate well to the written word, <g>.Quote:
Originally Posted by DivaVocals
Fair comment, but unless I'm mistaken, he's currently in the process of doing an upgrade on a non live site, as such, there is no suitable link to be provided.Quote:
Originally Posted by DivaVocals
This related to ZenCarts 'conventional' image filenames for the different sized images (*_MED, *_LRG), which I admit has me a little confused because I'm under the impression that IH4 negates the need for these anyway.. doesn't it?Quote:
Originally Posted by DivaVocals
My conclusion was that IH4 simply isn't working. period.Quote:
Originally Posted by DivaVocals
That was going to be my suggestion too, but I thought I'd wait to see what your input was first.Quote:
Originally Posted by DivaVocals
With respect to GAM, I will add that he's not a novice/noob. He has been using ZenCart for almost as long as I can remember (my wife just laughed, and said its been much longer than my 2 week memory capacity. <g>).
I fear that because of this, there probably isn't much that we can give in the way of specific advice for the problem(s) reported (This is where I was hoping you may have been more helpful than I could). Methinks there is just some fundamental cause, a misplaced file, a javascript conflict, or something of a similar nature that is going to be impossible for us to guess at, in which case, yes, its back to the readme and/or repeating the install until it does work.
GAM, FWIW, I have also had similar issues in the past with some IH installations. I know how frustrating it can be, but I don't think I've ever come across the same problem more than once... IOW, each time, the cause has been some minor thing that I'd overlooked or missed during the install.
The idea that it could be a 'Oh, flick this and click that' is a very good one, but as an old 'nemesis' used to frequently say 'It aint that simple'.
Cheers
Rod
Good moanin'
LOL, perhaps it was because it was late (GMT+10 here) ;-) Apologies for the somewhat confusing/unclear post. I was tackling that post at the end of (another) very long day following round upon round of read, reread, tweak, etc. :blink:
Thank you both for responding.
I have stock coming in and a load of orders to deal with this morning but I hope to get back to it ASAP and will read again with clearer mind and perform the necessary installation and configuration steps.
Rod is very astute and knows me well. We have worked on Ozpost together at different times for a very long time. Thanks for your input and assistance Rod. And yes, you are correct... mostly; IH4 isn't working properly and the site is currently 'down for maintenance'.
For clarity, Image - Use Proportional Images on Products and Categories setting effects results as follows:
Image - Use Proportional Images on Products and Categories = 1
1. No additional images (thumbnails) displayed
2. Watermark on large image only (should be medium too)
3. No hover effects
Image - Use Proportional Images on Products and Categories = 0
1. Additional images displayed (full size displays in pop-up)
2. No watermarks
3. No hover effects
4. Medium image quality not good
5. Medium image on click displays blank pop-up window i.e., no large image.
All other config settings as per Readme example.
Ignoring the above for now if necessary, please answer the following:
The readme states that IH4 works with Easy Populate and also works with an existing store, not affecting/modifying any existing images. My questions are:
1. Does IH4 regenerate images where they exist already? (I thought so)
2. How does it determine which image to use for IH4 'default' image given zen-cart image directory structure:
- store/images/my_manufacturer = small images with filename no suffix
- store/images/medium/my_manufacturer = medium images with filename and '_m' suffix
- store/images/large/my_manufacturer = large images with filename and '_l' suffix
[where, in my case, filename = model number]
Cheers
GAM