allocated order number

[DrByte]

The order number is assigned after the payment module completes entirely. The order is not created until payment is completed and verified by the payment module.

[ajmn]

many thanks for confirming this,
i did conclude this but did not want to presume.

as the payment method requires an order number to be posted
that leaves me with having to create a new dynamic order number system

for a work around does this sound a good route?....

I could use a numbering system based on the current time (it will involve raising the ‘2000000000’ limit)
e.g. order made today at 22:09:32 could be order number 130610220932007 [$new_orders_id = $yy . $MM . $DD . $H . $i . $s . $u] ....includes formatting the value for $u ~ ‘00’7, ‘0’17, 217 etc

this seems straightforward,

i concur this approach would mean gaps in the order numbers
and
i don’t think the probability is ever likely to be 1 for the situation where multiple orders end up having the have exact same start time.

ideas for a alternative / simpler method ?

[DrByte]

What the other payment modules do is look for the last order number, add one, and append a random suffix or timestamp, submitting the result with the payment request, but let ZC just do whatever it normally does when actually storing the final order. This accomplishes the desired goal with basically no changes to core functionality. It also prevents accidental duplicate numbers when submitting payments, even with busy sites and race-conditions, because the random number/string differentiates, and on the rare case where there is a clash, reconciliation activities are still very simple to handle when trying to match up numbers with orders (which is rarely a challenge).

[ajmn]

that's the easiest way, agreed,
it does not matter what order number is finally given to the customer,
I just did not want there to be any unnecessary confusion, e.g. one customer takes 4mins to complete and the second customer starting 1min later taking 2mins to complete.
my logic was suggesting their order numbers would swop when the customer is returned to the store and their order was finalised and saved to db...
therefore possibly complicating things if down the line if a request to the payment processor to administer a refund etc.
the payment processors might be perturbed by the original posted order number not matching the refund order number
~ life's too short!!
i will give your way a go, as you say it is a much simpler approach.
once ready, i'll test for the above scenario too and report the results

many thanks DrByte =:)

[ajmn]

BTW:
the example above...
$new_orders_id = $yy . $MM . $DD . $H . $i . $s . $u

was actually replaced by

$new_orders_id = round(microtime(true) * 10000);

...just in case anyone was thinking WTF!

[ajmn]

hi again
i’m running into two problems,
probably obvious but they are both eluding me... and i seem to be going around in circles... so am back for help!!

first one is getting the order number...
i’ve placed the following in

function process_button() 

and it caused the button and everything below it (on the 3of3 checkout page) to disappear,

$last_order_id = $db->Execute("SELECT * FROM " . TABLE_ORDERS . " ORDER BY orders_id DESC limit 1");
$new_order_id = $last_order_id->fields['orders_id'];
$new_order_id = ($new_order_id + 1);
$new_order_id = (string)$new_order_id . '-' . zen_create_random_value(6); 

in order to get to the 3rd party i’m using an arbitrary number

round(microtime(true) * 10000) 

so i get to the 3rd party....

the second problem i’m encountering is when returning to the store.
using a dummy card number the payment is naturally declined,

the transaction responses use posturl for
• transaction_status – either A (Approved) or D (Declined)
• transaction_value_pence – as passed and processed
• order_number – as passed
• date_time - Date and time of order (YYYY-MM-DD HH:MM:SS)
these are passed (as $_POST’s)
and returnurl
the order_number (ono)
this is passed as $_GET

the URLs are set as

    $posturl =  zen_href_link(FILENAME_CHECKOUT_PROCESS);
    $returnurl= zen_href_link(FILENAME_CHECKOUT_PROCESS); 

and then added to and sent to the 3rd party using the

$process_button_string; 

i know the values are getting sent, and then sent back...
...i’ve sent the store to an intercept page where i just echo my $_POST values
and i’ve sent their $_POST and $_GET values to another intercept page which simply echo’s them, (instead of returning to my store).

returning to the store (without diverting to the intercept echo pages) i get
domainname.com/storefolder/index.php?main_page=checkout_process?ono=13712341508486 (the url as seen in the browser address bar)
and the store centre column displays a 404 page not found error

so the obvious questions are
why am i not able to query the order number, or more precisely,
why does the line

$new_order_id = $last_order_id->fields['orders_id']; 

cause the button and everything below to disappear?

and

am i setting the right URLs (posturl and returnurl)?
if not where should i be returning to? (NB: i’ve tried FILENAME_CHECKOUT_PAYMENT too),
if i’m using the correct URLs, then, where do i start defining the action to take (A or !A)? (NB: currently this is in function before_process() but it’s having no effect)
i’ve tried using the posturl intercept page to add the code and point to FILENAME_CHECKOUT_PROCESS (also FILENAME_CHECKOUT_PAYMENT) but it still fails to process the responses

phew, hope you managed to follow the above!
any pointers would be very very much appreciated to get me moving onward again

[lhungil]

...
i’ve placed the following in

function process_button() 

and it caused the button and everything below it (on the 3of3 checkout page) to disappear,

$last_order_id = $db->Execute("SELECT * FROM " . TABLE_ORDERS . " ORDER BY orders_id DESC limit 1");
$new_order_id = $last_order_id->fields['orders_id'];
$new_order_id = ($new_order_id + 1);
$new_order_id = (string)$new_order_id . '-' . zen_create_random_value(6); 

...

Did you remember to declare $db as global in the function? Typically a function using $db looks something like this:

function getLastOrderId() {
    global $db;

    $result = $db->Execute(
        'SELECT MAX(orders_id) AS `last_id` FROM `' . TABLE_ORDERS . '`';
    );
    if(!$result->EOF) {
        return (int) $result->fields['last_id'];
    }
    else return -1;
} 

When debugging errors the Zen Cart debug logs and your web server's error log are good places to look.

Not sure about the answers to your other questions...

[ajmn]

Did you remember to declare $db as global in the function?

dang! said it was something simple!!
good job there's no-one who's around to slap me!
same with the logs...
haven't had to refer to them for yonks so forgot all about them!
the second problem will probably reveal itself now with blazing light

time I took a coffee break I think!

many thanks


...now walking away to the kettle in utter despair at one's own stupidity!