Zen Lightbox addon [Support Thread]

[ZeusMM]

I have installed Lightbox 1.5 and it works well. My only problem is that I cannot see any additional images from the inital popup. I do not see next or previous and therefore cannot move to the next image for the product.

I do see the additional images on the product pages but not with the Lightbox.

The website is http://whiskers-ok.com

Please help me - I have tried to find any solution but cannot move any further...

Andi

[DarkAngel]

@ZeusMM:

I went to your shop and instead of the images (the extra images) just being there as usual, they seem to have asmall popup window of their own--a hover window is what I call it. What I mean is is you hold your mouse over the extra images at the bottom they show to you in a hovering window.

do you have more than one type of lighbox set up?

My images in my own store do not open into a lightbox window with "next" nor show that there are more either, never has. I think it is because (in my case) due to the way I have mine named.

Read the documents in the zip and there is one of them it tells you about the naming of the images.

sorry not much help

[ZeusMM]

Hi

Yes I have Image Handler 2 installed as well, they say that the two are compatible. The naming convention is correct, i.e. image.jpg and then image_1.jpg etc.

I guess you are seeing the same problem as I do...

Still hoping for help then...

Ciao

[dre]

Who can Helpme with this error I got stucked with:

Success 4 statements processed.
Error ERROR: Cannot insert configuration_key "" because it already exists
Warning Note: 1 statements ignored. See "upgrade_exceptions" table for additional details.

I have also image handler 2 installed

Zencart version 1.3.8a

Thanx for any help

Andre

P.S> This is the query result maybe its usefull too:

Query Results:
INSERT INTO configuration_group VALUES (NULL, 'Zen Lightbox', 'Configure Zen Lightbox settings', '0', '1');
UPDATE configuration_group SET sort_order = LAST_INSERT_ID() WHERE configuration_group_id = LAST_INSERT_ID();
SELECT @cgi := configuration_group_id FROM configuration_group WHERE configuration_group_title = 'Zen Lightbox';
INSERT INTO configuration (configuration_id, configuration_title, configuration_key, configuration_value, configuration_description, configuration_group_id, sort_order, last_modified, date_added, use_function, set_function) VALUES (NULL, 'Zen Lightbox', 'ZEN_LIGHTBOX_STATUS', 'true', '
If true, all product images on the following pages will be displayed within a lightbox:

- document_general_info
- document_product_info
- page (EZ-Pages)
- product_free_shipping_info
- product_info
- product_music_info
- product_reviews
- product_reviews_info
- product_reviews_write

Default: true', @cgi, 100, NOW(), NOW(), NULL, 'zen_cfg_select_option(array(''true'', ''false''), '), (NULL, 'Overlay Opacity', 'ZEN_LIGHTBOX_OVERLAY_OPACITY', '0.8', '
Controls the transparency of the overlay.

Default: 0.8', @cgi, 101, NOW(), NOW(), NULL, 'zen_cfg_select_option(array(''0'', ''0.1'', ''0.2'', ''0.3'', ''0.4'', ''0.5'', ''0.6'', ''0.7'', ''0.8'', ''0.9'', ''1''), '), (NULL, 'Overlay Fade Duration', 'ZEN_LIGHTBOX_OVERLAY_FADE_DURATION', '400', '
Controls the fade duration of the overlay.

Note: This value is measured in milliseconds.

Default: 400
', @cgi, 102, NOW(), NOW(), NULL, NULL), (NULL, 'Resize Duration', 'ZEN_LIGHTBOX_RESIZE_DURATION', '400', '
Controls the speed of the image resizing.

Note: This value is measured in milliseconds.

Default: 400
', @cgi, 103, NOW(), NOW(), NULL, NULL), (NULL, 'Resize Transition', 'ZEN_LIGHTBOX_RESIZE_TRANSITION', 'false', '
Allows for custom control over the transition effect used to animate the lightbox.

Default: false
', @cgi, 104, NOW(), NOW(), NULL, NULL), (NULL, 'Initial Width', 'ZEN_LIGHTBOX_INITIAL_WIDTH', '250', '
If Enable Resize Animations is set to true, the lightbox will resize its width from this value to the current image width, when first displayed.

Note: This value is measured in pixels.

Default: 250
', @cgi, 105, NOW(), NOW(), NULL, NULL), (NULL, 'Initial Height', 'ZEN_LIGHTBOX_INITIAL_HEIGHT', '250', '
If Enable Resize Animations is set to true, the lightbox will resize its height from this value to the current image height, when first displayed.

Note: This value is measured in pixels.

Default: 250
', @cgi, 106, NOW(), NOW(), NULL, NULL), (NULL, 'Image Fade Duration', 'ZEN_LIGHTBOX_IMAGE_FADE_DURATION', '400', '
Controls the fade duration of images.

Note: This value is measured in milliseconds.

Default: 400
', @cgi, 107, NOW(), NOW(), NULL, NULL), (NULL, 'Caption Animation Duration', 'ZEN_LIGHTBOX_CAPTION_ANIMATION_DURATION', '400', '
Controls the animation duration of the caption.

Note: This value is measured in milliseconds.

Default: 400
', @cgi, 108, NOW(), NOW(), NULL, NULL), (NULL, 'Display Image Counter', 'ZEN_LIGHTBOX_COUNTER', 'true', '
If true, the image counter will be displayed (below the caption of each image) within the lightbox.

Default: true', @cgi, 109, NOW(), NOW(), NULL, 'zen_cfg_select_option(array(''true'', ''false''),'), (NULL, 'Close on Image Click', 'ZEN_LIGHTBOX_CLOSE_IMAGE', 'false', '
If true, the lightbox will close when the image being displaying is clicked.

Default: false', @cgi, 110, NOW(), NOW(), NULL, 'zen_cfg_select_option(array(''true'', ''false''), '), (NULL, 'Close on Overlay Click', 'ZEN_LIGHTBOX_CLOSE_OVERLAY', 'false', '
If true, the lightbox will close when the overlay is clicked.

Default: false', @cgi, 111, NOW(), NOW(), NULL, 'zen_cfg_select_option(array(''true'', ''false''), '), (NULL, 'Keyboard Navigation', 'ZEN_LIGHTBOX_KEYBOARD_NAVIGATION', 'true', '
If true, keyboard inputs will also be used to control the lightbox.

Default: true', @cgi, 200, NOW(), NOW(), NULL, 'zen_cfg_select_option(array(''true'', ''false''), '), (NULL, 'Close Lightbox', 'ZEN_LIGHTBOX_ESCAPE_KEYS', '27,88,67', '
The lightbox will close when any of these keys are pressed.

Note: Only ASCII decimal values should be entered and separated with a comma (if listing multiple values).

Default: 27,88,67
', @cgi, 201, NOW(), NOW(), NULL, NULL), (NULL, 'Previous Image', 'ZEN_LIGHTBOX_PREVIOUS_KEYS', '37,80', '
The lightbox will display the previous image (if available) when any of these keys are pressed.

Note: Only ASCII decimal values should be entered and separated with a comma (if listing multiple values).

Default: 37,80
', @cgi, 202, NOW(), NOW(), NULL, NULL), (NULL, 'Next Image', 'ZEN_LIGHTBOX_NEXT_KEYS', '39,78', '
The lightbox will display the next image (if available) when any of these keys are pressed.

Note: Only ASCII decimal values should be entered and separated with a comma (if listing multiple values).

Default: 39,78
', @cgi, 203, NOW(), NOW(), NULL, NULL), (NULL, 'Gallery Mode', 'ZEN_LIGHTBOX_GALLERY_MODE', 'true', '
If true, the lightbox will allow additional images to quickly be displayed using previous and next buttons.

Default: true', @cgi, 300, NOW(), NOW(), NULL, 'zen_cfg_select_option(array(''true'', ''false''),'), (NULL, 'Include Main Image in Gallery', 'ZEN_LIGHTBOX_GALLERY_MAIN_IMAGE', 'true', '
If true, the main product image will be included in the lightbox gallery.

Default: true', @cgi, 301, NOW(), NOW(), NULL, 'zen_cfg_select_option(array(''true'', ''false''),'), (NULL, 'EZ-Pages Support', 'ZEN_LIGHTBOX_EZPAGES', 'true', '
If true, the lightbox effect will be used for linked images on all EZ-Pages.

Default: true', @cgi, 400, NOW(), NOW(), NULL, 'zen_cfg_select_option(array(''true'', ''false''),'), (NULL, 'File Types', 'ZEN_LIGHTBOX_FILE_TYPES', 'jpg,png,gif', '
On EZ-Pages, the lightbox effect will be applied to all images with one of the following file types.

Default: jpg,png,gif
', @cgi, 401, NOW(), NOW(), NULL, NULL);

[Berserker]

Hello there,

I have this module installed on my site Zen Cart 1.3.8a and with IH2. Everything installed fine and things are working on IE, FF and Chrome. The only problem I have is that I only have 1 image for a product but when you enlarge it, it says "1 of 2 images" but both images are the same?! Can anyone please help me get rid of the duplicate.

Thanks...

[Berserker]

Duplicate sorted by setting "Include Main Image in Gallery" to False :)

[DarkAngel]

Clarify please...

1. are you just installing it...or

2. are you re-installing it

IF:

1. did you make sure the database prefix is right?

2. is it an update? did you remove and uninstall the previous version before doing this one?

Who can Helpme with this error I got stucked with:

Success 4 statements processed.
Error ERROR: Cannot insert configuration_key "" because it already exists
Warning Note: 1 statements ignored. See "upgrade_exceptions" table for additional details.

I have also image handler 2 installed

Zencart version 1.3.8a

Thanx for any help

Andre

P.S> This is the query result maybe its usefull too:

Query Results:
INSERT INTO configuration_group VALUES (NULL, 'Zen Lightbox', 'Configure Zen Lightbox settings', '0', '1');
UPDATE configuration_group SET sort_order = LAST_INSERT_ID() WHERE configuration_group_id = LAST_INSERT_ID();
SELECT @cgi := configuration_group_id FROM configuration_group WHERE configuration_group_title = 'Zen Lightbox';
INSERT INTO configuration (configuration_id, configuration_title, configuration_key, configuration_value, configuration_description, configuration_group_id, sort_order, last_modified, date_added, use_function, set_function) VALUES (NULL, 'Zen Lightbox', 'ZEN_LIGHTBOX_STATUS', 'true', '
If true, all product images on the following pages will be displayed within a lightbox:

- document_general_info
- document_product_info
- page (EZ-Pages)
- product_free_shipping_info
- product_info
- product_music_info
- product_reviews
- product_reviews_info
- product_reviews_write

Default: true', @cgi, 100, NOW(), NOW(), NULL, 'zen_cfg_select_option(array(''true'', ''false''), '), (NULL, 'Overlay Opacity', 'ZEN_LIGHTBOX_OVERLAY_OPACITY', '0.8', '
Controls the transparency of the overlay.

Default: 0.8', @cgi, 101, NOW(), NOW(), NULL, 'zen_cfg_select_option(array(''0'', ''0.1'', ''0.2'', ''0.3'', ''0.4'', ''0.5'', ''0.6'', ''0.7'', ''0.8'', ''0.9'', ''1''), '), (NULL, 'Overlay Fade Duration', 'ZEN_LIGHTBOX_OVERLAY_FADE_DURATION', '400', '
Controls the fade duration of the overlay.

Note: This value is measured in milliseconds.

Default: 400
', @cgi, 102, NOW(), NOW(), NULL, NULL), (NULL, 'Resize Duration', 'ZEN_LIGHTBOX_RESIZE_DURATION', '400', '
Controls the speed of the image resizing.

Note: This value is measured in milliseconds.

Default: 400
', @cgi, 103, NOW(), NOW(), NULL, NULL), (NULL, 'Resize Transition', 'ZEN_LIGHTBOX_RESIZE_TRANSITION', 'false', '
Allows for custom control over the transition effect used to animate the lightbox.

Default: false
', @cgi, 104, NOW(), NOW(), NULL, NULL), (NULL, 'Initial Width', 'ZEN_LIGHTBOX_INITIAL_WIDTH', '250', '
If Enable Resize Animations is set to true, the lightbox will resize its width from this value to the current image width, when first displayed.

Note: This value is measured in pixels.

Default: 250
', @cgi, 105, NOW(), NOW(), NULL, NULL), (NULL, 'Initial Height', 'ZEN_LIGHTBOX_INITIAL_HEIGHT', '250', '
If Enable Resize Animations is set to true, the lightbox will resize its height from this value to the current image height, when first displayed.

Note: This value is measured in pixels.

Default: 250
', @cgi, 106, NOW(), NOW(), NULL, NULL), (NULL, 'Image Fade Duration', 'ZEN_LIGHTBOX_IMAGE_FADE_DURATION', '400', '
Controls the fade duration of images.

Note: This value is measured in milliseconds.

Default: 400
', @cgi, 107, NOW(), NOW(), NULL, NULL), (NULL, 'Caption Animation Duration', 'ZEN_LIGHTBOX_CAPTION_ANIMATION_DURATION', '400', '
Controls the animation duration of the caption.

Note: This value is measured in milliseconds.

Default: 400
', @cgi, 108, NOW(), NOW(), NULL, NULL), (NULL, 'Display Image Counter', 'ZEN_LIGHTBOX_COUNTER', 'true', '
If true, the image counter will be displayed (below the caption of each image) within the lightbox.

Default: true', @cgi, 109, NOW(), NOW(), NULL, 'zen_cfg_select_option(array(''true'', ''false''),'), (NULL, 'Close on Image Click', 'ZEN_LIGHTBOX_CLOSE_IMAGE', 'false', '
If true, the lightbox will close when the image being displaying is clicked.

Default: false', @cgi, 110, NOW(), NOW(), NULL, 'zen_cfg_select_option(array(''true'', ''false''), '), (NULL, 'Close on Overlay Click', 'ZEN_LIGHTBOX_CLOSE_OVERLAY', 'false', '
If true, the lightbox will close when the overlay is clicked.

Default: false', @cgi, 111, NOW(), NOW(), NULL, 'zen_cfg_select_option(array(''true'', ''false''), '), (NULL, 'Keyboard Navigation', 'ZEN_LIGHTBOX_KEYBOARD_NAVIGATION', 'true', '
If true, keyboard inputs will also be used to control the lightbox.

Default: true', @cgi, 200, NOW(), NOW(), NULL, 'zen_cfg_select_option(array(''true'', ''false''), '), (NULL, 'Close Lightbox', 'ZEN_LIGHTBOX_ESCAPE_KEYS', '27,88,67', '
The lightbox will close when any of these keys are pressed.

Note: Only ASCII decimal values should be entered and separated with a comma (if listing multiple values).

Default: 27,88,67
', @cgi, 201, NOW(), NOW(), NULL, NULL), (NULL, 'Previous Image', 'ZEN_LIGHTBOX_PREVIOUS_KEYS', '37,80', '
The lightbox will display the previous image (if available) when any of these keys are pressed.

Note: Only ASCII decimal values should be entered and separated with a comma (if listing multiple values).

Default: 37,80
', @cgi, 202, NOW(), NOW(), NULL, NULL), (NULL, 'Next Image', 'ZEN_LIGHTBOX_NEXT_KEYS', '39,78', '
The lightbox will display the next image (if available) when any of these keys are pressed.

Note: Only ASCII decimal values should be entered and separated with a comma (if listing multiple values).

Default: 39,78
', @cgi, 203, NOW(), NOW(), NULL, NULL), (NULL, 'Gallery Mode', 'ZEN_LIGHTBOX_GALLERY_MODE', 'true', '
If true, the lightbox will allow additional images to quickly be displayed using previous and next buttons.

Default: true', @cgi, 300, NOW(), NOW(), NULL, 'zen_cfg_select_option(array(''true'', ''false''),'), (NULL, 'Include Main Image in Gallery', 'ZEN_LIGHTBOX_GALLERY_MAIN_IMAGE', 'true', '
If true, the main product image will be included in the lightbox gallery.

Default: true', @cgi, 301, NOW(), NOW(), NULL, 'zen_cfg_select_option(array(''true'', ''false''),'), (NULL, 'EZ-Pages Support', 'ZEN_LIGHTBOX_EZPAGES', 'true', '
If true, the lightbox effect will be used for linked images on all EZ-Pages.

Default: true', @cgi, 400, NOW(), NOW(), NULL, 'zen_cfg_select_option(array(''true'', ''false''),'), (NULL, 'File Types', 'ZEN_LIGHTBOX_FILE_TYPES', 'jpg,png,gif', '
On EZ-Pages, the lightbox effect will be applied to all images with one of the following file types.

Default: jpg,png,gif
', @cgi, 401, NOW(), NOW(), NULL, NULL);

[dre]

Thanx for you reply!

1 Just Installing it

2 No

If

1 I use No Prefix (I think).And if so, were do I change that????

2 No it isnt.


Thanx

Andre

Clarify please...

1. are you just installing it...or

2. are you re-installing it

IF:

1. did you make sure the database prefix is right?

2. is it an update? did you remove and uninstall the previous version before doing this one?

[DarkAngel]

you need to go into your database controller to look at the database tables. that way you will see if you used a prefix and you won't change it there in the database but you will need to fix the code to show the prefix

although since you did not get the error that you could not install it I am not sure but you might not need the prefix.

Does it show up in the admin section of your store---admin/configuration/shown at the last of that list and do the settings show up too.

You only ran the sql installer once---right?

Thanx for you reply!

1 Just Installing it

2 No

If

1 I use No Prefix (I think).And if so, were do I change that????

2 No it isnt.


Thanx

Andre

[Asdesign]

I have installed Lightbox 1.5 and it works well. My only problem is that I cannot see any additional images from the inital popup. I do not see next or previous and therefore cannot move to the next image for the product.

I do see the additional images on the product pages but not with the Lightbox.

The website is http://whiskers-ok.com

Please help me - I have tried to find any solution but cannot move any further...

Andi

Hi, it seems that your lightbox isn't controlling the additional images so what you should try is copying 'additional_images.php' from the lightbox installation and place it under includes/modules/your-template.