Ceon Advanced Shipper v 5.0.2

[14all41]

I've had this module installed for several years now in ZC 1.5.
I use only UPS and the zip code is assigned according to the manufacturer.
The problem is in Method Configuration it won't allow me to select from the Applicable Categories/Manufacturers/Products section of the page. I can work with any other configuration with no problem.
And yes I did tick this selection first: (Apply this method for the specific categories and/or manufacturers and/or products selected below only.)
Before posting this I tried replacing several of the admin files but it changed nothing.
This module is no longer supported so I had hoped someone might have an idea as to the problem.
I put up a brief video to help explain what is going on, since I am at a loss.

https://www.youtube.com/watch?v=3bge...ature=youtu.be

http://ffpetsupplies.com/

[14all41]

I should add that I can copy a method which already has a manufacturer selected and it will allow me to delete the selection, but not insert another or add an additional one.

[jimmie]

i know this is not a solution, but you should be able to input straight into phpmyadmin.

[Ajeh]

https://www.youtube.com/watch?v=3bge...ature=youtu.be

That video appears to be locked, so nobody can access it, even with the link.

[14all41]

I apologize for that. The video should be public now.
I'll look into that jimmie.

[jimmie]

if you look for my other posts on advanced shipper, you may find my version rewrites work (May fix your issues and add a feature or two), But no guarantees

[14all41]

So the method number would be 37 and in phpmyadmin it ends at 36 under advshipper_method_manufacturers`
This could be because I was not able to select a manufacturer when I set up method #37.

[jimmie]

copy the 1 that had 1 in there and from there

[jimmie]

actually just tried mine and it wont show selected category to save either

[jimmie]

i cloned this module and it is working on the clone, ill have to compare and note the differences