Image Handler 5 (for v1.5.5 - v1.5.8) Support Thread

[lat9]

On any product page you will see that the main image will pop just fine but not next ones.

Thanks, I just didn't scroll down far enough. What's the configuration value for LARGE_IMAGE_WIDTH and LARGE_IMAGE_HEIGHT?

[shags38]

Mike, could you point me to a page that displays the unwanted behavior?

Hi Cindy, thanks for your reply - here is a link to a product page - it is consistent on any page with additional images (obviously )

cheers,
Mike

[lat9]

Mike, would you post a screenshot of the IH-5 configuration? That's found by clicking first Tools :: Image Handler, then the Admin Tools link and finally View Image Handler Configuration.

[lat9]

Mike, would you post a screenshot of the IH-5 configuration? That's found by clicking first Tools :: Image Handler, then the Admin Tools link and finally View Image Handler Configuration.

... and what are the current settings for LARGE_IMAGE_WIDTH and LARGE_IMAGE_HEIGHT? Check to see if these are defined in the database; it looks like the width is set to 150.

[shags38]

... and what are the current settings for LARGE_IMAGE_WIDTH and LARGE_IMAGE_HEIGHT? Check to see if these are defined in the database; it looks like the width is set to 150.

Hi Cindy - attached is the screenshot of configuration as requested. Large image width is set at 750 and height at 550 - small and medium only have width set, 150 and 450 respectively - over the years I have expected IH to properly proportion the image sizes based on width. In uploading images I do not use any of the suffixes nor do I load the images into those folders (Large, Medium, Small) - just into a folder named 'earrings' (in this case).

I checked my database for any remnants of Zen Lightbox in case they have carried over through various version upgrades but found nothing (once upon a time IH worked in conjunction with / required Lightbox if I recall correctly).

cheers, Mike

[lat9]

Hi Cindy - attached is the screenshot of configuration as requested. Large image width is set at 750 and height at 550 - small and medium only have width set, 150 and 450 respectively - over the years I have expected IH to properly proportion the image sizes based on width. In uploading images I do not use any of the suffixes nor do I load the images into those folders (Large, Medium, Small) - just into a folder named 'earrings' (in this case).

I checked my database for any remnants of Zen Lightbox in case they have carried over through various version upgrades but found nothing (once upon a time IH worked in conjunction with / required Lightbox if I recall correctly).

cheers, Mike

Mike, that large image width/height shown in the configuration print-out are maximum values. If you use the site's Tools :: Developers Tool Kit and, in the topmost form, enter LARGE_IMAGE_WIDTH, does it indicate that a configuration value is present?

[shags38]

Hi Cindy - screenshot attached of developers tool kit inquiry you requested - width is indeed 150. I took a look in the database and did not see an entry for LARGE_IMAGE_WIDTH. I then went to admin/configuration and changed LARGE_IMAGE_WIDTH from 150 to 575 (all my images are pre-sized 575 x 450 before uploading) - I then tried the 'larger image' on additional images in the site however the same situation of a small lightbox existed as it was previously.


cheers, Mike



then after change

[lat9]

Hi Cindy - screenshot attached of developers tool kit inquiry you requested - width is indeed 150. I took a look in the database and did not see an entry for LARGE_IMAGE_WIDTH. I then went to admin/configuration and changed LARGE_IMAGE_WIDTH from 150 to 575 (all my images are pre-sized 575 x 450 before uploading) - I then tried the 'larger image' on additional images in the site however the same situation of a small lightbox existed as it was previously.


cheers, Mike



then after change

Mike, that 'after change' shows 175, not 575.

[shags38]

Mike, that 'after change' shows 175, not 575.

Hi Cindy - typos will be the death of me .... so now it is set at 575 width and have increased height to 450 (which was set at 120 for some bewildering reason) - all now appears to be OK.

I didn't associate Large image dimensions with 'additional images' size so many thanks for your help.

cheers,
Mike

[lat9]

I've just submitted v5.1.10 of IH-5 for the Zen Cart moderators' review; I'll post back here when it's available for download.

This release contains changes associated with the following GitHub issues:

#212: Correcting fatal PHP error when run under PHP 8.0 or later.
#213: Don't change zen_image function inputs if IH is not enabled.
#215: Modifications to use of PHP $GLOBALS in preparation for PHP 8.1 and later.

IH v5.1.10 is now available for download: https://www.zen-cart.com/downloads.php?do=file&id=2169