Image Handler 2 (for ZC v1.3.8 ONLY) Support

[aneroxic]

everything's fine now!!
i must have my eyes crossed from shifting so many files!

[aneroxic]

Hi Diva

Its me AGAIN

after solving installation problems, i have an issue with additional product images. I have read the forum on how to drag n drop additional images via FTP (with proper consistent naming) and have succesfully seen them on my site before IH2 was installed.

I have infact removed and did a fresh upload of my images after my IH2 installation (just in case), but my additional images dont show up still

whats the proper way to put in additional images w IH2 installed? FYI i placed additional images in the same folder as my main product image on the product info page

[DivaVocals]

If you are going to be uploading images via FTP (versus using the IH2 manager to upload your additional images), you need to read up on how Zen Cart expects them to be named in order to recognize them and properly associate them with the correct product. IH2 doesn't change default Zen Cart image behavior, it only helps to optimize an manage your images in an easier fashion. The Zen Cart FAQs should help you understand what needs to happen to get additional images working:

Search Results for "additional images"

Displaying 10 out of 56 found articles:

Why am I seeing images for other products on my product pages? Problem: On my product pages, I'm seeing images from other products showing under my product description. Why? How do I change this? Cause: The "additional images" feature is causing this. Solution: You...
Relevance: 100 | Setting Up Products and Attributes

How do I add multiple images to a product? by: Ajeh - Linda McGrath A product owns 1 filename ... Note: the base image name is the original image name loaded for the product. The concept of multiple images is best explained using an example: From the Admin, you...
Relevance: 77.42 | Zen Cart Admin Controls

Hi Diva

Its me AGAIN

after solving installation problems, i have an issue with additional product images. I have read the forum on how to drag n drop additional images via FTP (with proper consistent naming) and have succesfully seen them on my site before IH2 was installed.

I have infact removed and did a fresh upload of my images after my IH2 installation (just in case), but my additional images dont show up still

whats the proper way to put in additional images w IH2 installed? FYI i placed additional images in the same folder as my main product image on the product info page

[aneroxic]

Hi Diva

Yes i had read n already named them accordingly as to how ZC recognises them. I uploaded the additional images via FTP as this is the only way i know of. How do you add in additional images via IH2?

There wasnt any guide on the installation page from the developer.

[DivaVocals]

Hi Diva

Yes i had read n already named them accordingly as to how ZC recognises them. I uploaded the additional images via FTP as this is the only way i know of. How do you add in additional images via IH2?

There wasnt any guide on the installation page from the developer.

The IH2 interface is where you would add either the primary product image or the additional images..

However if you use FTP to upload your additional product images (instead of using the IH2 interface to add them), there isn't anything "more" you need to do in IH2 to make you additional images display..

If the additional images are NOT displaying then it means either you've installed IH2 or ZLB incorrectly or the images themselves may not be conforming to Zen Cart requirements/standards for additional images..

My guess is that since it's additional images not working that you did not follow the install guidelines posted on the ZLB support thread (or here on this support thread) about the order in which you must install these two mods to get them working together. See this: http://www.zen-cart.com/forum/showth...35913&page=645 read posts 6449 and 6450. See if this helps..

[DarkAngel]

The IH2 interface is where you would add either the primary product image or the additional images..

However if you use FTP to upload your additional product images (instead of using the IH2 interface to add them), there isn't anything "more" you need to do in IH2 to make you additional images display..

If the additional images are NOT displaying then it means either you've installed IH2 or ZLB incorrectly or the images themselves may not be conforming to Zen Cart requirements/standards for additional images..

My guess is that since it's additional images not working that you did not follow the install guidelines posted on the ZLB support thread (or here on this support thread) about the order in which you must install these two mods to get them working together. See this: http://www.zen-cart.com/forum/showth...35913&page=645 read posts 6449 and 6450. See if this helps..

another thing...do not do what I did and name them with the _lrg and _med in the names just name them with the main image name_01.jpg then change the number for each additinal one you have

mainimage.jpg
mainimage_01.jpg

and so on

[DivaVocals]

another thing...do not do what I did and name them with the _lrg and _med in the names just name them with the main image name_01.jpg then change the number for each additinal one you have

mainimage.jpg
mainimage_01.jpg

and so on

Which is precisely why I re-posted the FAQ on additional images.. If you follow Ajeh's instructions all should be PERFECT!

[Centec2b]

Image Handler2, Rev. 8
Zen Cart 1.3.9h
PHP Version: 5.2.14 (Zend: 2.2.0)

Good Evening All

I have IH2 on my live and test system. Both work fine except on the live system when inputting a new image, the BASE IMAGE DIRECTORY popup shows a list of image folders in non alpha order. The files for the live system were FTP'd up from the test system where the same function works just fine in alpha order.

This is getting to be a real problem as there is now a considerable number of folders

I think this information comes from admin/image_handler.php around lines 843 to 846 and seems to invoke DIR_FS_CATALOG_IMAGES.

That would seem to suggest a corruption, but I am not sure a) if I am on the right track b) how to proceed from here

I would be grateful for any thoughts or guidance

Thank you

Centec2b

[Serious]

v1.39
Latest copy of IH

Can't get the Watermarks to work.

Triple checked that all the files are in the right spots.

Here's my settings:

Small Image Width 80
Small Image Height
Heading Image Width - Admin 57
Heading Image Height - Admin
Subcategory Image Width 80
Subcategory Image Height
Calculate Image Size true
Image Required true
Image - Shopping Cart Status 1
Image - Shopping Cart Width 50
Image - Shopping Cart Height
Category Icon Image Width - Product Info Pages 57
Category Icon Image Height - Product Info Pages 40
Top Subcategory Image Width 80
Top Subcategory Image Height
Product Info - Image Width 150
Product Info - Image Height
Product Info - Image Medium Suffix _MED
Product Info - Image Large Suffix _LRG
Product Info - Number of Additional Images per Row 1
Image - Product Listing Width 80
Image - Product Listing Height
Image - Product New Listing Width 80
Image - Product New Listing Height
Image - New Products Width 80
Image - New Products Height
Image - Featured Products Width 80
Image - Featured Products Height
Image - Product All Listing Width 80
Image - Product All Listing Height
Product Image - No Image Status 1
Product Image - No Image picture no_picture.gif
Image - Use Proportional Images on Products and Categories 1
IH resize images yes
IH small image filetype no_change
IH small image background 255:255:255
IH watermark small images no
IH zoom small images yes
IH small image compression quality 85
IH medium image filetype no_change
IH medium image background 255:255:255
IH watermark medium images yes
IH medium image compression quality 85
IH large image filetype no_change
IH large image background 255:255:255
IH watermark large images yes
IH large image compression quality 85
IH large image maximum width 450
IH large image maximum height
IH watermark gravity Center


If I could get the "Large" water mark to work I'd be thrilled.


Suggestions?

[DarkAngel]

v1.39
Latest copy of IH

Can't get the Watermarks to work.

Triple checked that all the files are in the right spots.

Here's my settings:

Small Image Width 80
Small Image Height
Heading Image Width - Admin 57
Heading Image Height - Admin
Subcategory Image Width 80
Subcategory Image Height
Calculate Image Size true
Image Required true
Image - Shopping Cart Status 1
Image - Shopping Cart Width 50
Image - Shopping Cart Height
Category Icon Image Width - Product Info Pages 57
Category Icon Image Height - Product Info Pages 40
Top Subcategory Image Width 80
Top Subcategory Image Height
Product Info - Image Width 150
Product Info - Image Height
Product Info - Image Medium Suffix _MED
Product Info - Image Large Suffix _LRG
Product Info - Number of Additional Images per Row 1
Image - Product Listing Width 80
Image - Product Listing Height
Image - Product New Listing Width 80
Image - Product New Listing Height
Image - New Products Width 80
Image - New Products Height
Image - Featured Products Width 80
Image - Featured Products Height
Image - Product All Listing Width 80
Image - Product All Listing Height
Product Image - No Image Status 1
Product Image - No Image picture no_picture.gif
Image - Use Proportional Images on Products and Categories 1
IH resize images yes
IH small image filetype no_change
IH small image background 255:255:255
IH watermark small images no
IH zoom small images yes
IH small image compression quality 85
IH medium image filetype no_change
IH medium image background 255:255:255
IH watermark medium images yes
IH medium image compression quality 85
IH large image filetype no_change
IH large image background 255:255:255
IH watermark large images yes
IH large image compression quality 85
IH large image maximum width 450
IH large image maximum height
IH watermark gravity Center


If I could get the "Large" water mark to work I'd be thrilled.


Suggestions?

you have 3 watermark images, right...one in main images folder watermark.png...one in large folder watermark_LRG.png and the medium folder watermark_MED.png

is it the same size as the original one or larger or smaller...curious