-
Re: ozpost shipping module
Quote:
Originally Posted by
Trinity
OK, so some further information here.
When logged in as a user, the module will work as long as there are no dimensions set on the individual products. If I set the dimensions, then place an order for 10 of that item, it aggregates the dimensions ie product is 25cm x 10cm x 2cm it makes the parcel 250cm long, and therefore invokes the error.
Is there a way to get around that?
Thanks!
In other words, it has nothing really to do with the user being logged in or not, nor does it have anything to do with the destination. The problem is based entirely on multiple items exceeding allowed limits.
There are two ways around this..
1) The BEST method.
Sell these items in bulk packages (apparently that is the way you are expecting people to buy them). So by pre-packaging in lots of 10 you can keep your parcel size minimal.
2) The worst thing you can possibly do if you expect accurate quotes all of the time, as well as running the risk of creating a parcel that is simply too large for any given carrier to handle.
Enable the 'constrain dimensions' option (ozpost v2.0.6).
-----
Yeah, I know that you, like almost every other ecommerce merchant on the planet are thinking there must be a better way, but the fact is, there isn't. There are some methods that are better than others under certain conditions and there a a lot more sophisticated systems around than ozpost, but it ultimately comes down to having to obey the laws of physics.
If any given customer adds enough items of any given size to their shopping cart sooner or later the contents WILL be too heavy or too large for any of the normal carriers to handle.
Cheers
Rod
-
Re: ozpost shipping module
Quote:
Originally Posted by
Trinity
When logged in as a user, the module will work as long as there are no dimensions set on the individual products.
An addendum:
Logged in or not this behaviour will be the same.
The best way to consider the individual products dimensions is to treat them as an override of the default item dimensions.. This way if you have lots of items all 'close enough' to be considered the 'same size' (for shipping purposes) you'll only need to set the default, and then the 'odd sized' items can be given their own dimension to override the defaults.
Cheers
Rod
-
Re: ozpost shipping module
Thanks Rod
You have been a great help!
I will probably go with your suggestion 1. and try to package the items into bundles for wholesale orders.
Cheers
-
Re: ozpost shipping module
I'm having a problem with Ozpost of late.
I keep getting some products using the flat rate shiping method but only if the product is of a certain size.
eg. Height = 2
length = 10
width =2
this doesn't work but if I change these sizes to:
Height = 10
Length = 3
width =3
then it does work.
Q. Are there minimal package dimensions that are required?
Can someone please have a look at my site and see if I have done something really silly?
www.mihealth.com.au.
This problem always occures with the toothpaste products.
Thanks Mkgarth
-
Re: ozpost shipping module
Quote:
Originally Posted by
mkgarth
I'm having a problem with Ozpost of late.
I keep getting some products using the flat rate shiping method but only if the product is of a certain size.
eg. Height = 2
length = 10
width =2
this doesn't work but if I change these sizes to:
Height = 10
Length = 3
width =3
then it does work.
A product measuring 2 x 10 x 2 is small enough to be treated as a letter.
A product measuring 3 x 10 x 3 isn't.
Conclusion. You have disallowed letters as a valid shipping method and you have chosen to hide parcel rates if the item is considered to be letter sized.
Solution1: Enable letters as a valid option.
Solution2: Don't hide the parcel rates when the item is smal lenough to be a letter.
-
Re: ozpost shipping module
Thank You very much Rod,
I knew it would be something simple.
Regards Mkgarth:clap:
-
Re: ozpost shipping module
I am currently revisiting an old customers' zen-cart site that I setup a couple of years ago (I think).
It is running Zen Cart v.1.3.8a and AustPost Improved 2.0.1.
Lately, the following error has been popping up:
"ERROR:Unable to obtain a valid quote from the Australia Post Server.
You may still checkout using this method and we will contact you with postage costs as soon as possible."
Some questions:
1) I take it my problem has something to do with this being an old version of Zen-Cart and/or AustPost?
2) Is the latest OzPost (2.0.6) compatible with Zen Cart 1.3.8a? (...or will I HAVE to upgrade Zen Cart first)
I apologise if these have been answered already. I couldn't find these specific answers with my searches. I'm guessing they haven't been asked because they are so obvious! (to most)
As a fledgling programmer myself, I am absolutely amazed at the development and support you offer for this add-on Rod!!!
All very much appreciated.
Cheers,
Stanbridge
-
Re: ozpost shipping module
Quote:
Originally Posted by
stanbridge
Some questions:
1) I take it my problem has something to do with this being an old version of Zen-Cart and/or AustPost?
2) Is the latest OzPost (2.0.6) compatible with Zen Cart 1.3.8a?
Yes, and Yes.
Cheers
Rod
-
Re: ozpost shipping module
The perfect response! Thanks again Rod, you're a legend!
Cheers,
Chris
-
Re: ozpost shipping module
I upgraded zencart to latest version today: v1.3.9d
I upgraded ozpost shipping module to latest ozpost V2.0.5
- the icons for OzPost are not showing up
if I click properties eg Australia Post it shows:
ozpost_austpost_logo.Yes
ozpost_rpp.Yes
ozpost_ppse5k.Yes
I would appreciate assistance to fix this or direction to what I have uploaded incorrectly.
:blush:
Many thanks:smile:
Sandy
-
Re: ozpost shipping module
I am now uploading v2.0.6 to see if that helps.
ps. In above post, the "properties":
ozpost_austpost_logo.Yes
ozpost_rpp.Yes
ozpost_ppse5k.Yes
are seen when I am on my live site, and right mouse click on the
(x) Australia Post etc
which shows instead of the ICON for Australia Post in the customer shipping options in the shipping method shopping cart pge.
-
Re: ozpost shipping module
Hi Rod
I have just tried to install this module.
Am running latest version of zencart
When I go to Shipping and try to install the module I get the following error
Quote:
1054 Unknown column 'NONE' in 'field list'
in:
[insert into zen_configuration (configuration_title, configuration_key, configuration_value, configuration_description, configuration_group_id, sort_order, date_added) VALUES ('Dispatch Postcode', 'MODULE_SHIPPING_OZPOST_SPCODE', NONE, 'Dispatch Postcode?', '6', '2', now())]
If you were entering information, press the BACK button in your browser and re-check the information you had entered to be sure you left no blank fields.
Any ideas?
Cheers
Danielle
-
Re: ozpost shipping module
:oops:Doh!! (slap up side the head smiley!!)
I didn't set the store postcode :blush:
Works now!
Cheers
Danielle
-
Re: ozpost shipping module
Quote:
Originally Posted by
ozmosaics
I would appreciate assistance to fix this or direction to what I have uploaded incorrectly.
There are two questions that need to be asked that only you can answer.
1. Where (what folder) are the icons *currently* located?
2. Where (what folder) *should* the icons be located?
The answer to #1 can be found by looking to see where you uploaded them too.
The answer to #2 will be revealed when you select 'properties' after right clicking on one of the missing images and noting the line that reads 'Location' (or similar).
Cheers
Rod
-
Re: ozpost shipping module
Hi Rod, Thanks for the reply.
I have been reading through past posts. I "removed" the OzPost from Shipping module, back end (I had noticed I had "spaces" in the drop down in the module, after the new upgrade) and read the post by you mentioning to "remove" and "reinstall" in the admin zen panel.
It worked. The icons are now showing (just need to edit the as they are oversized), so I am getting there!
I checked and rechecked the folders where I installed the ICONS and they did look correctly placed, so the uninstall/reinstalled seemed to removed the xxxxxx.yes from the image.
(I know you must have a long beard to pull on, so you don't rip your hair out! You are so good to all of us!). Thank you again. I am now going doing some more checking the new updates. Thank you so much, my husband is really excited with the new module for ozpost and said to pass on his THANKS too!
Cheers! Sandy
-
Re: ozpost shipping module
Quote:
Originally Posted by
ozmosaics
It worked. The icons are now showing (just need to edit the as they are oversized)
Before doing any edits, try the other file types. (jpg/png/gif). They are NOT just a different filetype, but also different icon sets.
Cheers
Rod
-
Re: ozpost shipping module
Hi Rod, Thanks! I found that little list and thought BINGO! Am trying out the different types now. Main problem (for me) is they are appearing "very large" in my shopping cart. Plodding on!
It's been a huge learning day for me today - I managed to upgrade to zen cart to latest version (including learning how to upgrade the data base- and upgraded ozpost too). I am determined to get the "icons" right before dawn! LOL!
Must be time for a "milo"....
Cheers!
-
Re: ozpost shipping module
Sorted the "distorted" icon image sizes in my shopping cart-shipping options.
....I Googled "fuzzy images" in zencart (LOL!) and read about image sizes.
Went to my backed end Admin, edited CONFIG, IMAGES. and set one image section to "calculate image size". That will do for now, it had been a while since I edited images and was making the job "too hard" for myself.
I know I sound "rambling", it's late, been at it all day...will check it all tomorrow.
Thanks again Rod, for the new module.
Cheers Sandy
-
Re: ozpost shipping module
Hi, all of a sudden I have a problem with the Ozpost module where I get the following error:
Unexpected error (no valid methods). Using AP Flat Rate.
Nothing has been changed in the module and it was working perfectly fine up until I noticed this error.
I have noticed that there is a new version out (may 31 2010). Would this fix the problem and also why would the older version work fine one day and not the next.
Hopefully someone can help.
Anna
Toy Crazy
www.toycrazy.com.au
-
Re: ozpost shipping module
Quote:
Originally Posted by
annav
Hi, all of a sudden I have a problem with the Ozpost module where I get the following error:
Unexpected error (no valid methods). Using AP Flat Rate.
Nothing has been changed in the module and it was working perfectly fine up until I noticed this error.
I have noticed that there is a new version out (may 31 2010). Would this fix the problem and also why would the older version work fine one day and not the next.
Hopefully someone can help.
Anna
Toy Crazy
www.toycrazy.com.au
Go back to Page 80, and read post #797 by Rod..
You might find it explains your issues...
-
Re: ozpost shipping module
Hi there,
I am just having an issue with ozpost 2.06 i installed it, it was working correctly and now one or two days later with out making any changes i am getting this error "MODULE_SHIPPING_OZPOST_COST_ON_ERROR_TYPE" i was just wondering if this is related to one of my .php files or possibly something to do with Australia post itself ? if anyone could help me shed some light on this it would be greatly appreciated.
Thanks
-
Re: ozpost shipping module
Quote:
Originally Posted by
devinej1
Hi there,
I am just having an issue with ozpost 2.06 i installed it, it was working correctly and now one or two days later with out making any changes i am getting this error "MODULE_SHIPPING_OZPOST_COST_ON_ERROR_TYPE" i was just wondering if this is related to one of my .php files or possibly something to do with Australia post itself ? if anyone could help me shed some light on this it would be greatly appreciated.
Thanks
sorry got mixed up i am running ozpost 2.05 and zencart 1.3.8a. sorry for the confusion!
-
Re: ozpost shipping module
Quote:
Originally Posted by
devinej1
sorry got mixed up i am running ozpost 2.05 and zencart 1.3.8a. sorry for the confusion!
Ok with a little playing around i got it working again. I removed and reinstalled the shipping module and all is working again. so please disregard my other posts.
-
Re: ozpost shipping module
Hi Rod,
just a quickie.
ive got the registered set up and thats showing true but with my smaller items that say for example have a weight of .09kg its still only showing up the 3kg prepaid option instead of the 500g.
i have the weight set to kg across the board and have tried the tare weight settings from 10 to 0 and nothing changes
any ideas?
tracy
-
Re: ozpost shipping module
Quote:
Originally Posted by
silkvixen
Hi Rod,
just a quickie.
Thanks for the offer.
Quote:
Originally Posted by
silkvixen
ive got the registered set up and thats showing true but with my smaller items that say for example have a weight of .09kg its still only showing up the 3kg prepaid option instead of the 500g.
i have the weight set to kg across the board and have tried the tare weight settings from 10 to 0 and nothing changes
any ideas?
tracy
"small" and "light" are different. For an item to be able to fit into a 500gm satchel it needs to satisfy both. The item is apparently light enough at .09kg, but is it small enough?
Cheers
Rod
-
Re: ozpost shipping module
Quote:
Originally Posted by
RodG
Thanks for the offer.
"small" and "light" are different. For an item to be able to fit into a 500gm satchel it needs to satisfy both. The item is apparently light enough at .09kg, but is it small enough?
Cheers
Rod
its a baby bib so yes :)
-
Re: ozpost shipping module
Quote:
Originally Posted by
silkvixen
its a baby bib so yes :)
You know that, and now I know it too. This isn't important or relevent though. What is important is does the *shipping module* know?
-
Re: ozpost shipping module
Quote:
Originally Posted by
RodG
You know that, and now I know it too. This isn't important or relevent though. What is important is does the *shipping module* know?
ok well "how" do i put it into the module?
the defualt dimensions are still the same so yeh i have no idea
-
Re: ozpost shipping module
Quote:
Originally Posted by
silkvixen
ok well "how" do i put it into the module?
the defualt dimensions are still the same so yeh i have no idea
The default dimensions are used whenever an item doesn't have its own dimensions specified.
To enter the products own dimensions, this is done by filling in the appropriate boxes when adding or editing the product/item.
Product Weight: http://shop.vcsweb.com/zadmin/images/pixel_trans.gif Product Height (cm): http://shop.vcsweb.com/zadmin/images/pixel_trans.gif Product Length (cm): http://shop.vcsweb.com/zadmin/images/pixel_trans.gif Product Width (cm): http://shop.vcsweb.com/zadmin/images/pixel_trans.gif http://shop.vcsweb.com/zadmin/images/pixel_trans.gif
-
Re: ozpost shipping module v2.0.7 released
The ozpost shipping module v2.0.7 has been released.
No new features, but several bug-fixes.
This release also brings this module back in line with the the work that has been performed on the osCommerce port of this module.
Among the changes comes the fact that the ozpost.vcsweb.com server has now gone commercial. This will affect ALL users of the ozpost shipping module REGARDLESS OF VERSION.
All current and new users of this module have SIXTY DAYS free access (from today, or the first time they connect to the server, whichever comes first).
After the expirty date (unless renewed) the module will only be able to provide static quotes (fixed price, cost per item or cost per kg).
v2.0.7 incorporates a feedback system that will show the store owner the number of days remaining.
It'll take a few days for the new update to be made available in the downloads section, so as an alternative the latest update can be found here
-
Re: ozpost shipping module
Quote:
All current and new users of this module have SIXTY DAYS free access (from today, or the first time they connect to the server, whichever comes first).
After the expirty date (unless renewed) the module will only be able to provide static quotes (fixed price, cost per item or cost per kg).
So does this mean that we have to pay the annual fee or our module won't work fully ? Just providing a basic rate that we put in as a default? Sorry I'm just not clear on this
-
2 Attachment(s)
Re: ozpost shipping module
Hi Rod,
I'm having a problem with 2.0.7. It was there with 2.0.6 as well.
I'm setting up a new store and installed 2.0.6 The problem I'm having is that I don't want to offer letter options and if I uncheck it then the only option the customer is given is the fixed rate option.
But, when I enable debug, then it works correctly. :(
Any clues as to why this might happen?
Cheers,
Peter.
-
Re: ozpost shipping module
Quote:
Originally Posted by
Peter Homann
Hi Rod,
I'm having a problem with 2.0.7. It was there with 2.0.6 as well.
I'm setting up a new store and installed 2.0.6 The problem I'm having is that I don't want to offer letter options and if I uncheck it then the only option the customer is given is the fixed rate option.
But, when I enable debug, then it works correctly. :(
Any clues as to why this might happen?
Cheers,
Peter.
Set "Hide Parcel Rates if letter sized" to "No".
-
Re: ozpost shipping module
Quote:
Originally Posted by
artycles
So does this mean that we have to pay the annual fee or our module won't work fully ? Just providing a basic rate that we put in as a default? Sorry I'm just not clear on this
Yes . that is exactly what it means.
-
Re: ozpost shipping module
OK, thanks for clarification
-
Re: ozpost shipping module
Ok,
So what are we looking at being the annual fee?
I havent upgraded yet as I pay someone to do this for me and want to know if it is worth it or not first.
-
Re: ozpost shipping module
check out the link provided, I think it gives all the info needed. If you follow the link and then go to 'registrations' you'll see the fee structure. You'll be the best judge of if it is worth it for you or not. The system works well, it's just how much do you want to pay for it.
-
Re: ozpost shipping module
Quote:
Originally Posted by
gabbytwin
I havent upgraded yet as I pay someone to do this for me and want to know if it is worth it or not first.
Whether you upgrade or not is unimportant. It is the *server* that is imposing the fees, so it won't matter which version of the client is being used it will cease to provide quotes sixty days from the first time the server is accessed (starting from July 11th)
If you *don't* upgrade this may come as a bit of a shock. If you DO upgrade at least you'll be getting constant feedback as to how long you have left.
-
Re: ozpost shipping module
Ok, thanks for that.
I think for now I might just switch to table rates when this happens, and look a bit closer at other ways.
The ability of this module was the only reason I have stayed with zencart really. But open cart has the same feature.
Thanks for referring me back to the link that is http://shop.vcsweb.com/index.php?mai...2c74cb3fba5673
-
Re: ozpost shipping module
Quote:
Originally Posted by
gabbytwin
I think for now I might just switch to table rates when this happens, and look a bit closer at other ways.
It also wouldn't surprise me to see someone release another Australia Post module before this time comes as well (I know several people here with the capability, and 60 days is more than enough notice, in my opinion).
Quote:
Originally Posted by
gabbytwin
The ability of this module
I'm unsure what 'ability' you are referring to here... The ability to contact a 3rd party server in order to obtain current rates, or the ability to provide quotes from multiple carriers, or the ability to sort packages into letter, satchel and parcel sizes, all of the above, or something else entirely?
Quote:
Originally Posted by
gabbytwin
was the only reason I have stayed with zencart really. But open cart has the same feature.
As above, what 'feature' are you referring to?
I'm really not sure what you are getting at other than giving advance notice that you will be among the 98% of people that I expect will be dropping the ozpost service (if you wish to toss the baby out with the bathwater by deserting zencart too then that is your perogitive, but it seems foolish to me). I don't see how this will have any negative affect on me, other than freeing up a few server resources and a lot of my time.
I'm CERTAINLY not going to plead with you to reconsider your plans (regarding ozpost), but I really am genuinely curious as to what opencart has that makes it appealing enough for you to consider changing, because at the moment opencart, like most other ecommerce sites, only has the ability to give basic parcel rates, so this can't be what you mean by 'the same feature', so, as I said, I'm curious.
Cheers
Rod.
ps. OpenCart is on the list to have an ozpost client written for it, so in this regard, zencart is way ahead.
-
Re: ozpost shipping module
Hi Rod, I will be sticking with you. I want to thank you for all you have done on the OzPost module. I would not have a webshop without your wonderful module combined with the great ZenCart!
You have helped so much and given so much time - I am happy to pay for the module for my ZenCart shop. I will be taking the 36 months option - have to hope I will still have my webshop business in three years!
Will you still be working on the module in the future? - :smartalec: it's been such a comfort and help, knowing you have been there to assist and assist greatly - I can't imagine the hours you have put in. I moderate large forums in another arena and it's definitely a dedicated, passionate person who lasts the distance.
$5 a month is reasonable if you have a web shop - business on line. The Fastway module and the Australia Post module are fantastic and we can't manage without it.
So, when the new upgrade for ZenCart is listed for download, I will register etc. :clap:
Thanks again Rod and thanks also to all the members here to contribute - I have learnt so much from your questions and answers and generosity.
I feel sick at the thought of installing any other Australian postal module - when this one does the job so well!
-
Re: ozpost shipping module
Quote:
Originally Posted by
ozmosaics
Will you still be working on the module in the future? - :smartalec:
LOL. No, I'm gunna take everyone's money and go live on an island paradise somewhere.
Seriously though, I've no plans to discontinue support for it, in fact the opposite... I've plans to extend it even further by adapting the code to support more eCommerce sites, as well as plans to include more carriers/couriers.
Quote:
Originally Posted by
ozmosaics
it's been such a comfort and help, knowing you have been there to assist and assist greatly -
I'll still be around, after all, I am first and foremost a zencart user.. our shop is based on zencart.
Quote:
Originally Posted by
ozmosaics
I can't imagine the hours you have put in. I moderate large forums in another arena and it's definitely a dedicated, passionate person who lasts the distance.
I'm still dedicated and passionate about it (both the module, and the support of it) - The most sugnificant difference that it will make around here is that I'll be spending a lot less time supporting zencart itself and more time supporting ozpost (albeit, on a broader scale due to the increased number of clients).
Quote:
Originally Posted by
ozmosaics
$5 a month is reasonable if you have a web shop - business on line.
I know you are not alone with this... in fact I did a short survey of some of the ozpost users that I am more familar with, which is how I/we came up with the price structure. It needed to be low enough that its costs would be offset by increased sales from competitive freight costs and/or losses that would otherwise be incurred by undercharging (due to cubing rules, etc).
At the same time it needed to be high enough to produce an income equivilent to 15hrs per week employment in order to satisfy centerlink requirements for a 55 y/o - Which is what will allow me to devote a lot more time to it. (I turn 55 in October, specifically, 10/10/10 .... makes me born in 1955 .... 1+9=10, 5+5=10 ). <spoooky>
I guess with all those 1's and 0's I was born to be a programmer :-)
Quote:
Originally Posted by
ozmosaics
So, when the new upgrade for ZenCart is listed for download,
No need to wait... you can download it from the vcsweb store..
Cheers
Rod
-
Re: ozpost shipping module
Hi Rod, Just a quick question about Fastway options. We live in outer Melbourne, so it adds an extra day to delivery times. Can we change this? If so where do we go to do it? (I am not expert, am more of a dangerous hack!)
Thanks
-
Re: ozpost shipping module
I just installed the new version and I'm getting nasty session errors?
http://grandscheme.com.au/
Code:
Warning: session_start() [function.session-start]: Node no longer exists in /xxxxx/xxxxx/xxxxx/xxxxx/includes/functions/sessions.php on line 108
Warning: session_start() [function.session-start]: Cannot send session cache limiter - headers already sent (output started at /xxxxx/xxxxx/xxxxx/xxxxx/includes/functions/sessions.php:108) in /home2/exoticc1/public_html/triplebeam/includes/functions/sessions.php on line 108
Warning: Cannot modify header information - headers already sent by (output started at /xxxxx/xxxxx/xxxxx/xxxxx/includes/functions/sessions.php:108) in /xxxxx/xxxxx/xxxxx/xxxxx/includes/init_includes/init_templates.php on line 78
Any ideas what could be causing this?
-
Re: ozpost shipping module
Hi Rod,
First of all I can understand your reasoning and as always it is sound :-)
I ma surprised though that nobody has asked the following question or did I miss it?.
Is the cost per site or per person?
The reason is that I am running a number of small specialized sites. None of them makes any serious money(or any money at all :-( so buying the module for each site will prove prohibitive to say the least. Of course on the other hand if I have to pay only for one and been able to use it for all then it is worth scrapping together the few bucks.
Can you please let me know?
In any event thank you again for all your great assistance over the years and for a really great module.
Tassos
-
Re: ozpost shipping module
Quote:
Originally Posted by
exoticcorpse
I just installed the new version and I'm getting nasty session errors?
http://grandscheme.com.au/
Code:
Warning: session_start() [function.session-start]: Node no longer exists in /xxxxx/xxxxx/xxxxx/xxxxx/includes/functions/sessions.php on line 108
Warning: session_start() [function.session-start]: Cannot send session cache limiter - headers already sent (output started at /xxxxx/xxxxx/xxxxx/xxxxx/includes/functions/sessions.php:108) in /home2/exoticc1/public_html/triplebeam/includes/functions/sessions.php on line 108
Warning: Cannot modify header information - headers already sent by (output started at /xxxxx/xxxxx/xxxxx/xxxxx/includes/functions/sessions.php:108) in /xxxxx/xxxxx/xxxxx/xxxxx/includes/init_includes/init_templates.php on line 78
Any ideas what could be causing this?
I should also note that this error does not occur until I run the shipping estimator. Then it appears over the whole site when you continue browsing
-
Re: ozpost shipping module
Quote:
Originally Posted by
jazzah
Hi Rod, Just a quick question about Fastway options. We live in outer Melbourne, so it adds an extra day to delivery times. Can we change this? If so where do we go to do it? (I am not expert, am more of a dangerous hack!)
Thanks
Set the "Postage Delay" to the number of days you wish to add.
-
Re: ozpost shipping module
Quote:
Originally Posted by
hrinfo
Is the cost per site or per person?
Per Store .
Quote:
Originally Posted by
hrinfo
The reason is that I am running a number of small specialized sites. None of them makes any serious money(or any money at all :-( so buying the module for each site will prove prohibitive to say the least. Of course on the other hand if I have to pay only for one and been able to use it for all then it is worth scrapping together the few bucks.
Can you please let me know?
Please email/pm me with the store names as well as how much you are comfortable paying. I am sure we should be able to come to some mutual agreement (especially for the first year or so).
This offer is also open to anyone else reading this that happens to be in a similar situation.
Cheers
Rod
-
Re: ozpost shipping module
Quote:
Originally Posted by
exoticcorpse
I just installed the new version and I'm getting nasty session errors?
Thisw is a new one on me.
What version of zencart are you using?
All I can think of at the moment is that you have uploaded some of the files into the wrong places.
Does the module correctly show in your admin/modules/shipping area?
Any other clues?
Cheers
Rod
-
Re: ozpost shipping module
Quote:
Originally Posted by
RodG
Set the "Postage Delay" to the number of days you wish to add.
The problem with that is it then adds a day to everything, so express post adds a day, when that isn't accurate. At the moment Fastway is showing 1 day to Melbourne, when it takes 2, so customers re choosing that instead of Express Post which will take the 1 day as Fastway seems cheaper.
So we need to increase it only for fastway!
Thanks
Junelle
ps we will certainly subscribe, always wondered how you managed the time to do this and resources.
-
Re: ozpost shipping module
Quote:
Originally Posted by
jazzah
The problem with that is it then adds a day to everything,
<snip>
So we need to increase it only for fastway!
Assuming you are using a current version (v2.0.5 or V2.0.6) and don't mind modifying code. locate the file /includes/modules/shipiing/ozpost.php
Then using a text editor, locate the following lines:
Code:
case "FWL";
if(in_array("FastWay Labels", $this->allowed_methods)) $handlingFee = MODULE_SHIPPING_OZPOST_FWL_HANDLING ;
break;
case "FWS":
if(in_array("FastWay Satchel", $this->allowed_methods)) $handlingFee = MODULE_SHIPPING_OZPOST_FWS_HANDLING ;
break;
The modify or replace them with:
Code:
case "FWL";
if(in_array("FastWay Labels", $this->allowed_methods)) {
$handlingFee = MODULE_SHIPPING_OZPOST_FWL_HANDLING ;
$quote->days = $quote->days + 1 ;
}
break;
case "FWS":
if(in_array("FastWay Satchel", $this->allowed_methods)) {
$handlingFee = MODULE_SHIPPING_OZPOST_FWS_HANDLING ;
$quote->days = $quote->days + 1 ;
}
break;
Don't forget to make a backup of the file first, so if it goes wrong you won't find yourself stuck... just revert to the backup.
Cheers
Rod
-
Re: ozpost shipping module
Quote:
Originally Posted by
exoticcorpse
I should also note that this error does not occur until I run the shipping estimator. Then it appears over the whole site when you continue browsing
I've had a look at your site for further clues, and noticed that as well as these errors, the estimator is also showing an undefined CONSTANT, namely:
CART_SHIPPING_QUOTE_CRITERIA
This is usually defined in the /includes/languages/english.php file.
Does this file exist on your server? Does it have correct permissions?
This file is one of the core zencart files. It isn't touched or affected by the ozpost module, and I suspect you'd be getting the same error regardless of what shipping module you are using.
(Also, Why has my font changed?)
Cheers
Rod
-
Installation problems
I get this message when installing:
Network Connectivity test FAILED
Is cURL installed on your server? (it needs to be). If so, this may be a temporary glitch, try again in a few minutes.
Installation will NOT continue.
I used the curltester and yes, curl is installed and working correctly on the server.
In a past post, you mentioned about commenting lines out of the ozpost.php module? Tried that and it made no difference and I haven't read the posts in between there and here.
What can be causing this? If it is a server related problem, I need to explain to them what to check / look for.
-
Re: Installation problems
Quote:
Originally Posted by
delia
In a past post, you mentioned about commenting lines out of the ozpost.php module?
I can only guess that you are referring to the suggestion made to one person, in one particular circumstance that would allow installtion to continue, even though the module itself still couldn't work? At least that person knew what he was doing and why he needed to do it.
Quote:
Originally Posted by
delia
Tried that and it made no difference
In that case either you screwed up, or you are referring to a different suggestion made for a different reason?
Quote:
Originally Posted by
delia
and I haven't read the posts in between there and here.
What can be causing this?
The answer is probably in one of the posts you chose to not read, because clearly your time is more valuable than mine and I'm happy to sit here and repost everything that may be relevent to you, in spite of the fact that you haven't given any clues... Not even a comment about what version of zencart or what version of ozpost you are using.
No drama, as well as having infinite time avaialble to dedicate to you I am also blessed with psychic abilities. (Nah, just kidding). :-)
Quote:
Originally Posted by
delia
If it is a server related problem, I need to explain to them what to check / look for.
Are you with godaddy?
Are you SURE cURL is functional (from your webserver)
Did you run the curltester program from your home machine or from your server. If the server, please provide a URL. If your local machine please try it again from your server.
Cheers
Rod
-
Re: ozpost shipping module
Quote:
Originally Posted by
RodG
Thisw is a new one on me.
What version of zencart are you using?
All I can think of at the moment is that you have uploaded some of the files into the wrong places.
Does the module correctly show in your admin/modules/shipping area?
Any other clues?
Cheers
Rod
Yes it's showing correctly in the Admin. And calculating in the Estimator, but with the errors. Using version 1.3.7.1.
Also, I checked languages/english.php. That line mentioned isn't in there. Just added it in and it fixed that part. Odd.
-
Re: ozpost shipping module
Quote:
Originally Posted by
exoticcorpse
Yes it's showing correctly in the Admin. And calculating in the Estimator, but with the errors. Using version 1.3.7.1.
Hmmm, perhaps it isn't as compatible with 1.3.7 as I've been told.
Quote:
Originally Posted by
exoticcorpse
Also, I checked languages/english.php. That line mentioned isn't in there. Just added it in and it fixed that part. Odd.
This makes me wonder what else is missing. I really don't know what to suggest now other than consider upgrading your zen.
Cheers
Rod
-
Re: ozpost shipping module
It was working fine and had been for 6 months before I upgraded to the new version? I'll look into it further and report back
-
Re: ozpost shipping module
Quote:
Originally Posted by
exoticcorpse
It was working fine and had been for 6 months before I upgraded to the new version? I'll look into it further and report back
What version did you upgrade from? (it may more may not give a clue)
-
Re: Installation problems
Quote:
Originally Posted by
RodG
I can only guess that you are referring to the suggestion made to one person, in one particular circumstance that would allow installtion to continue, even though the module itself still couldn't work? At least that person knew what he was doing and why he needed to do it.
In that case either you screwed up, or you are referring to a different suggestion made for a different reason?
The answer is probably in one of the posts you chose to not read, because clearly your time is more valuable than mine and I'm happy to sit here and repost everything that may be relevent to you, in spite of the fact that you haven't given any clues... Not even a comment about what version of zencart or what version of ozpost you are using.
No drama, as well as having infinite time avaialble to dedicate to you I am also blessed with psychic abilities. (Nah, just kidding). :-)
Are you with godaddy?
Are you SURE cURL is functional (from your webserver)
Did you run the curltester program from your home machine or from your server. If the server, please provide a URL. If your local machine please try it again from your server.
Cheers
Rod
Sarcasm is simply not necessary and I, as a zen cart module developer, would never respond that way. I am offended.
How often do you have to read pages and pages of a thread? No, my time is not more valuable than yours - that is unless you don't get paid for doing that. My bill to my client rises when I spend that much time on a particular thread and I do care about that.
As a developer, I said I had tried the curltester program - of course on the server. I'm not an idiot. And I said it worked - it gave me the results almost identical to the results you stated were correct in the parts of the thread I did read.
As that section was the only section that mentioned that error, I assumed the likelihood of there being more on the subject was low.
Of course it's the lastest version of the mod, and it is the lastest version of zen cart. The entire reason for installing this now is that we moved the hosting from godaddy by the way.
Now let's not waste any more time with unnecessary comments.
url: http://regimental-books.com.au/curltester.php
Oh, and one more thing. I just donated money to Ceon Conor for his outstanding help thru the forum. I don't mind paying to have things done, especially when folks are customer service oriented.
-
Re: Installation problems
Quote:
Originally Posted by
delia
. I am offended..
That is your choice.
Quote:
Originally Posted by
delia
How often do you have to read pages and pages of a thread?
Surprisingly, far too often, and generally it is because I'm seeking the solution to someone elses problem.
Quote:
Originally Posted by
delia
No, my time is not more valuable than yours - that is unless you don't get paid for doing that.
I don't get paid. period. Something I need to rectify very soon, else I won't be around to abuse ... err, help anyone anyway...
Quote:
Originally Posted by
delia
My bill to my client rises when I spend that much time on a particular thread and I do care about that.
My clients don't seem to value my time at all (ok, there are a number of exceptions to this rule)
Quote:
Originally Posted by
delia
I said I had tried the curltester program - of course on the server.
As a developer you should know that it wouldn't be safe for me to assume this was rhe case.
Quote:
Originally Posted by
delia
I'm not an idiot.
We all make mistakes and/or overlook the obvious at times. If I took the opposite approach and assumed you did everything RIGHT then you either wouldn't be having a problem, or the problem is inexplicable, so rightly or wrongly I assume that when things go wrong for just one (perhaps two) people, then they have doen something different, or their is something 'not normal' about their setup.
Quote:
Originally Posted by
delia
And I said it worked -
People lie. Often. Do you think I just invented my sarcastic streak just for you? No, it is a 'skill' that I've developed over many many years of dealing with customer problems.
Quote:
Originally Posted by
delia
it gave me the results almost identical to the results you stated were correct in the parts of the thread I did read.
As you know, this is a long thread, with the bulk of the content being my replies to other people. Until recently I used to follow all new posts and subsbribed to several different zencart forums, as well as a number of non zencart forums.. Type my name into google and I seem to occupy the 1st 10 pages or so - I can't remember everything I've said to everyone. I can make guesses and assumptions (as I did in my 1st response to you), but rather than clarify if these were correct or not you choose to be offended at my apparent sarcasm.
Quote:
Originally Posted by
delia
As that section was the only section that mentioned that error, I assumed the likelihood of there being more on the subject was low.
You are absolutely correct, because other than that one thread I can't recall any other similar ones, but as I said, I'm a prolific reader/writer and I don't remember everything about every conversation I've had.
I have even less of a memory when someone hi-jacks someone elses problem and makes it their own.
Quote:
Originally Posted by
delia
Of course it's the lastest version of the mod,
I'm NOT going to argue/dispute that, but if you only knew how many hours I've wasted trying to solve someones problem, being emphatically told those exact same words, only to discover 1) They were using an entirely different program/module, or 2) It was the latest version when they installed it five years ago.
For reference, V2.0.7 is the current latest, V2.0.8 should be available from the vcsweb.com site sometime tomorrow evening. (The upgrade has another courier added).
Quote:
Originally Posted by
delia
and it is the lastest version of zen cart.
As above, these words mean nothing to me. As a developer I'm surprised that you haven't been a LOT more explicit with you fault reporting.
Quote:
Originally Posted by
delia
Now let's not waste any more time with unnecessary comments.
OK, as long as you don't expect me to do all the work and research, and perhaps try to be a little more explicit with versions and other details.
Quote:
Originally Posted by
delia
Unless you relocated/removed it, this is an invalid URL (404 page not found error). No biggy, I found the script anyway, and yes, you are correct, it does seem to be all ok.....
Now, although once again I need to show my mistrust it is something that needs to be checked/tested/verified.
First, I am currently *assuming* your problem is still with the installation and not the operation of it, correct?
If so, you also stated that you made the same change as previously discussed to bypass this connectivity test during installation and it made no difference for you, Also correct?
If so, then I'm am at a totally and complete loss as to where to go from here, because any further testing/checking is going to require the module to be installed... And negating those tests with the aforementioned modifications should allow it to be installed. I can't see why it doesn't work for you... As a developer, perhaps you can think of something I've missed? Would you be offended if I asked you to double check? The installation code really isn't difficult to follow - In fact even deleting the 'exit' commands that follow the failed checks will allow the install to procede.
AFTER it is installed, you should see an 'opost multiqote' icon in the admin section.. if not, then we have a firewall issue (you server or ours). If the ico shows, then we are back into cURL territory. (we need to divide and conquer)
Happy hunting,
Rod
-
Re: ozpost shipping module
Hi Rod
I think your Nothing product is just too much. :yes:
Cheers
-
Re: Installation problems
I am now ignoring your sarcasm. Wasting time here.
"First, I am currently *assuming* your problem is still with the installation and not the operation of it, correct? "
Yes
"If so, you also stated that you made the same change as previously discussed to bypass this connectivity test during installation and it made no difference for you, Also correct? "
yes - but I'm not positive that i commented out the correct lines as that was originally referring to an earlier edition (again an assumption on my part). Those numbers refer to the function _get_error_cost in my file.
Hey, and yes, I make mistakes - but so does everyone else by the way - including you. I'm not saying a didn't make a mistake but I don't see where.
-
Re: Installation problems
Quote:
Originally Posted by
delia
"First, I am currently *assuming* your problem is still with the installation and not the operation of it, correct? "
Yes
Noted.
Quote:
Originally Posted by
delia
"you also stated that you made the same change as previously discussed to bypass this connectivity test during installation and it made no difference for you, Also correct? "
yes - but I'm not positive that i commented out the correct lines
BE POSITIVE.
THEN if you still have problems then get back to me and we can move on to the next step.
Shheeesh, this really has been a waste of time - You've had the answer to your installation issue all along, but because you badly implemented it, and even took offence when I suggested it as a possibility) we've simply gone around and around in circles.
There really was no need for this, because rather than admit (even to yourself) that you did a bad fix, you proudly stated in your original posting
"Tried that and it made no difference What can be causing this?"
Which I, and I'm sure most of us would have taken to be "succesuffly applied the fix and it made no diference", rather than the more factual "I don't tjhink I applied the fix correctly, but that wouldn't make a difference would it?"
Quote:
Originally Posted by
delia
Those numbers refer to the function _get_error_cost in my file.
How nice of you to mention this NOW.
Seriously, didn't you consider it important or even strange.
Oh, I just found that origianl post, which reads
" Somewhere around line 552 is a line that reads // version check / network check. Comment out the next 5 or six lines (down to and including the first/next closing brace "}"."
You call yourself a developer, yet you can't even do this correctly?
Quote:
Originally Posted by
delia
as a zen cart module developer,
I shudder to think. Honestly, the ozpost module contains several methods, one of them being _get_error_cost. another called _check, and yet another called _install.
You were trying to fix an install problem, why on earth would you think that doing stuff to the _get_error_cost function would be the right/logical thing to do?
Did you even find the text "// version / network check"
If you want to fix your install problem, then apply the fix to the _install function of the code.... The *line* numbers may not match which is why I said 'around line so and so' .
Quote:
Originally Posted by
delia
Hey, and yes, I make mistakes - but so does everyone else by the way
Yes, but few of us will make a mistake, ignore/deny the possibilty of doing so and expect there to be a different fix for the same problem.
If this statement wasn't true we wouldn't be having this 'conversation', and your installation would be able to procede without cURL functionality.
Quote:
Originally Posted by
delia
I'm not saying a didn't make a mistake but I don't see where.
Surely it is blindingly obvious now????????
Alas, I don't think it is.... the mistake you made was messing with the _get_error_cost function rather than the _install function.
It has been like getting blood out of a stone with getting enough information out of you to make this determination though, and I'll wager that you'll still be offended by my findings and conclusions. I'm sorry, I WISH I could tell you that you've done everything right and the code is wrong because that is the only answer you really want and expect.
Do you know what the real downer about all this is though? You have wasted so much of my time, and gotten me so frustrated at your thankless responses, that even though I have told you EXACTLY what you need to do in order to allow the installation to procede, I fear that faultfinding the *real* problem with you is an exersize I have no wish to inflict upon myself (The real problem being the inability of your cURL to connect to the ozpost servers). As a developer you really shouldn't have any problems faultfinding this on your own, but you haven't given me much confidence in this regard, so I ask one thing of you, if you do need my help again, please approach me as a learner rather than someone that knows what they are doing. I am more tolerant towards learners (they don't take offence when told or suggested that they've done something wrong).
-
Re: ozpost shipping module
I'm not really taking sides, but as a subscriber to this thread - and having read every single post - I think:
a) The forum rules should always be read and followed before a first post is made - they and the posting tips are explicit as to what a poster with a problem must provide in order to help a developer nail a problem
b) it's easy to forget (or be unaware of) the thousands of hours Rod has dedicated to this project over many years at no cost to us
c) this particular module is an enormously complex beast and it is also very easy and normal for both the developer and posters to become frustrated when things don't immediately work out
d) we should get on with the task of making this great module even better by learning from this little hiccup and moving on...
Cheers!
-
Re: ozpost shipping module
I'm just plain buffaloed. Where does it say that someone has the right to berate someone?
The waste of time is the long unnecessary answers and abuse.
There is one forum rule:
# Send, post or distribute any communication that is intended to harass, belittle, humiliate, threaten or cause embarrassment to a fellow member.
This one I consider broken.
-
Re: ozpost shipping module
Perhaps that is why it is important to provide the necessary information to the developer.
Neither do posters have the right to frustrate people - for any reason - least of all the developer, but also what about the other readers of this thread?
But I see your point too. So let's move on. There is nothing else in this for anybody.
-
Re: ozpost shipping module
Moving right along, I have this odd problem. First of all, I installed zencart v1.3.9d and then uploaded ozpost v2.0.6 and noticed that some entry fields' text was missing.
So I read the latest posts and discovered there was an update and installed ozpost v2.0.8.
But still some text is missing? I can't remember reading this anywhere else, but if a poster has ever struck this and solved it, I'd be very grateful for the help. It's probably something stupid I have done...but twice? (wouldn't be the first time! :lookaroun)
http://www.aapress.com.au/demo/ozpostprob1.jpg
-
Re: ozpost shipping module
Quote:
Originally Posted by
tpeck
Moving right along, I have this odd problem. First of all, I installed zencart v1.3.9d and then uploaded ozpost v2.0.6 and noticed that some entry fields' text was missing.
So I read the latest posts and discovered there was an update and installed ozpost v2.0.8.
But still some text is missing? I can't remember reading this anywhere else, but if a poster has ever struck this and solved it, I'd be very grateful for the help. It's probably something stupid I have done...but twice? (wouldn't be the first time! :lookaroun)
http://www.aapress.com.au/demo/ozpostprob1.jpg
You didn't read ALL the previous last few posts did you ?
This is all about the newly announced registration fees for this mod.. (Of which I WILL be obliging too..Love ya work Rod.!)
For every month that you register, one line of text will appear.... C'mon open up the wallet.. :cool::cool:
Only kidding..(obviously:P:P:P)..
Sorry I don't know the answer to your quandary, but this thread did need lightening up...
-
Re: ozpost shipping module
Aaaarghhh! Solved this myself.
Didn't read the last UPGRADE.txt file:
Code:
After upgrading you should *ALWAYS* log in as admin,
then 'REMOVE' and 'INSTALL' the ozpost module. Please take
note of your settings before doing this because they will be
returned back to their defaults as a result of this NECESSARY action.
:oops:
-
Re: ozpost shipping module
Thanks Mike - we all need a good laugh! Loved it!
-
Re: ozpost shipping module
Quote:
Originally Posted by
delia
I'm just plain buffaloed. Where does it say that someone has the right to berate someone?
The waste of time is the long unnecessary answers and abuse.
LOVE it... unnecessary answers are a waste of time. (one day you may understand why I find this so funny)
Quote:
Originally Posted by
delia
There is one forum rule:
# Send, post or distribute any communication that is intended to harass, belittle, humiliate, threaten or cause embarrassment to a fellow member.
.
Have I threatened you? (I don't mean emotionally, that was unintentional)
As for the belittlement, humiliation and embarassment, you have done that all by yourself. If anything, I merely exposed you.
With no other help you now know:
1. What you need to do to fix your installation problem
2. Why your first attempt to fix it didn't work.
You didn't figure this out by yourself, no one else around here gave you the answer, so the logical conclusion is that I must have somehow imparted this information to you... All the while you have been b!tching and moaning about my 'sarcarsm' and how much I have 'offended' you, and now I'm belittling and embarrasing you..
It has been a tough fight all the way. I have resisted your outbursts until we finally got the answer. I did this openly and willingingly, asking absolutely nothing it return, and at no point did I ever recieve a whisper of a 'thanks', simply more character assassination.
It is people like yourself that has me continually asking myself why the heck do I bother?
<big sigh>
I've already dropped all the other zencart threads due to this... I think it is probably time to drop this one too? <thinks aloud> If I'm lucky the dumbass time wasters will never find the new support forum </thinks aloud>.
delia, you can leave now... For the rest of you..
The latest ozpost update (v2.0.8) is now available for download.. A new courier has been added.. transdirect.com.au (check thier website if you've never heard of them)
Aaaaahhh.... I feel MUCH better now. Thanks del'
Rod
-
Re: ozpost shipping module
Hi Rod, I don't think it would be in anyone's interest to drop this thread - yours included especially now that you have found a way to be fairly recompensed for your efforts. :D
Let's be blunt - for too long you have been helping us all make money with nothing coming your way except headaches.
So everyone, check out Rod's multi-quote ozpost and pony up!:clap:
Great idea.
And please let's all just try to get along...eh? My eyes hurt.
-
Re: ozpost shipping module v2.0.7 released
Quote:
Originally Posted by
RodG
The ozpost shipping module v2.0.7 has been released.
No new features, but several bug-fixes.
This release also brings this module back in line with the the work that has been performed on the osCommerce port of this module.
Among the changes comes the fact that the ozpost.vcsweb.com server has now gone commercial. This will affect ALL users of the ozpost shipping module REGARDLESS OF VERSION.
All current and new users of this module have SIXTY DAYS free access (from today, or the first time they connect to the server, whichever comes first).
After the expirty date (unless renewed) the module will only be able to provide static quotes (fixed price, cost per item or cost per kg).
v2.0.7 incorporates a feedback system that will show the store owner the number of days remaining.
It'll take a few days for the new update to be made available in the downloads section, so as an alternative the latest update can be found
here
hello rod, a while since we spoke last and i do in fact have an update on our discussions back then, but that's for later. i will be scouring this thread for more info on the weekend, but for now simply have a client who requires an urgent response, and had therefore hoped for a simple yes or no answer so i can respond to them and let them know if it's likely to be them or me!
this client is using ozpost v1.0.2, and everything simply "stopped working". that is, no quotes are being generated at present, almost as if the module is switched off.
in your humble opinion, is this expected?
many thanks in advance, as stated i'll be searching this thread for more info in a few days.
andrejs
-
Re: ozpost shipping module v2.0.7 released
Quote:
Originally Posted by
ALiepinieks
this client is using ozpost v1.0.2, and everything simply "stopped working". that is, no quotes are being generated at present, almost as if the module is switched off.
This is a bug,
--------------------------------------------------------------
ozpost v1.0.2 - line 338 (or thereabouts)
Add: $HOST= str_replace(" ", "+", $HOST) ;
Change:
$qu = $this->_getAPdata($SERVER, "/postage.php?fromcode=" . MODULE_SHIPPING_OZPOST_SPCODE ."&destcode=$dcode&weight=$parcelweight&height=$parcelheight&width=$parcelwidth& length=$parcellength&value=$ordervalue&flags=$flags&$method=$method&host=$HOST&v ersion=$VERSION") ;
$qu = $this->_getAPdata($SERVER, "/postage.php?fromcode=" . MODULE_SHIPPING_OZPOST_SPCODE ."&destcode=$dcode&weight=$parcelweight&height=$parcelheight&width=$parcelwidth& length=$parcellength&value=$ordervalue&flags=$flags&host=$HOST&version=$VERSION" ) ;
------------------------------------------------------------------
Upgrading/downgrading will also solve the problem, it is only v1.0.2 with the issue.
Cheers
Rod
-
Re: ozpost shipping module v2.0.7 released
what a legend! thanks for the quick response, was planning on upgrading anyway, irrespective of any costs just needed to know if a quick fix was available for this weekend.
thanks again, speak soon!
andrejs
-
Re: ozpost shipping module v2.0.7 released
quick update: made the change you suggested as it seemed small and harmless enough, but no luck. still no quotes generated (visibly that is). haven't done any debugging yet.
i was hoping to put this off for about 3 weeks, but if the upgrade path is relatively painless i might just forget about debugging old code and jump into the new. obviously yo uwould recommend upgrading in most situations, but i really am pressed for time hence the question.
what do you think (oh, and thanks for any input in advance)?
andrejs
-
Re: ozpost shipping module v2.0.7 released
Quote:
Originally Posted by
ALiepinieks
quick update: made the change you suggested as it seemed small and harmless enough, but no luck. still no quotes generated (visibly that is). haven't done any debugging yet.
Enable the debugger to see if that offers any clues.
Quote:
Originally Posted by
ALiepinieks
i was hoping to put this off for about 3 weeks, but if the upgrade path is relatively painless i might just forget about debugging old code and jump into the new. obviously yo uwould recommend upgrading in most situations, but i really am pressed for time hence the question.
what do you think (oh, and thanks for any input in advance)?
andrejs
Upgrading is a pretty trivial task.. All you need do is replace the two files named 'ozpost.php' , upload the new icons... then go to the admin of the store, navigate to the shipping module, press 'remove' then 'install'.
You WILL need to review/change the default settings for handling costs, etc, so take note of the current settings first.
Cheers
rod
-
Re: ozpost shipping module v2.0.7 released
Quote:
Originally Posted by
RodG
$qu = $this->_getAPdata($SERVER, "/postage.php?fromcode=" . MODULE_SHIPPING_OZPOST_SPCODE ."&destcode=$dcode&weight=$parcelweight&height=$parcelheight&width=$parcelwidth& length=$parcellength&value=$ordervalue&flags=$flags&host=$HOST&version=$VERSION" ) ;
think i figured out what it was, was debugging while you were replying. server was responding ok, but i think you made a wee little typo (forgive if i'm wrong here).
the above code possibly should have read...
Code:
$qu = $this->_getAPdata($SERVER, "/postage.php?fromcode=" . MODULE_SHIPPING_OZPOST_SPCODE ."&destcode=$dcode&weight=$parcelweight&height=$parcelheight&width=$parcelwidth&length=$parcellength&value=$ordervalue&flags=$flags&$host=$HOST&version=$VERSION") ;
seems to be working now. thanks for your help : )
PS: yes, seems pretty straight forward. might try it this weekend. thanks again!
andrejs
-
Re: ozpost shipping module v2.0.7 released
one last question, is this version prone to random simplexml errors? seems to throw an exception once in a while, stating there's a missing '<', however one or two page refreshes seems to resolve the error... strange strange strange.
me thinks an upgrade is definitely in the wings.
andrejs
-
Re: ozpost shipping module v2.0.7 released
just updating my last post, last two errors (simply refreshed the page) were as follows:
Fatal error: Uncaught exception 'Exception' with message 'String could not be parsed as XML' in /home2/qualiue9/public_html/includes/modules/shipping/ozpost.php:352 Stack trace: #0 /home2/qualiue9/public_html/includes/modules/shipping/ozpost.php(352): SimpleXMLElement->__construct('') #1 /home2/qualiue9/public_html/includes/classes/shipping.php(131): ozpost->quote('') #2 /home2/qualiue9/public_html/includes/modules/pages/checkout_shipping/header_php.php(174): shipping->quote() #3 /home2/qualiue9/public_html/index.php(44): require('/home2/qualiue9...') #4 {main} thrown in /home2/qualiue9/public_html/includes/modules/shipping/ozpost.php on line 352
the one before that wsimilar, simply had 3 additional errors printed before this one. as stated, all i'm doing is refreshing the page. after the 8th refresh checkout_shipping page was displayed as per normal. same errors appear in the shipping estimator (obviously).
don't want to flog a dead horse, as i know this is all old version etc. just let me know if it's not worth the trouble persisting with this fix.
cheers
andrejs
-
Re: ozpost shipping module v2.0.7 released
last post until i hear back - i promise!
these are the three errors printed before the one above (couldn't seem to get them showing at first)
Warning: SimpleXMLElement::__construct() [simplexmlelement.--construct]: Entity: line 1: parser error : Start tag expected, '<' not found in /home2/qualiue9/public_html/includes/modules/shipping/ozpost.php on line 352
Warning: SimpleXMLElement::__construct() [simplexmlelement.--construct]: 3b in /home2/qualiue9/public_html/includes/modules/shipping/ozpost.php on line 352
Warning: SimpleXMLElement::__construct() [simplexmlelement.--construct]: ^ in /home2/qualiue9/public_html/includes/modules/shipping/ozpost.php on line 352
interestingly enought, the characters 3b in the middle of the second error simply change on each refresh, everything else stays the same until eventually the whole page works.
andrejs
-
Re: ozpost shipping module v2.0.7 released
Quote:
Originally Posted by
ALiepinieks
the above code possibly should have read...
Code:
$qu = $this->_getAPdata($SERVER, "/postage.php?fromcode=" . MODULE_SHIPPING_OZPOST_SPCODE ."&destcode=$dcode&weight=$parcelweight&height=$parcelheight&width=$parcelwidth&length=$parcellength&value=$ordervalue&flags=$flags&$host=$HOST&version=$VERSION") ;
seems to be working now. thanks for your help : )
The "$" you added needs to be removed.
There was an error there, in that a space character crept in, IOW, remove the '$' and close the space.
That'll take care of one issue.
The other issue.... Ensure you have cURL *enabled*. The XML is a bit flakey without it (due to 'chunking') . The latest version forces the use of cURL to avoid this problem.
Cheers
Rod
-
Re: ozpost shipping module v2.0.7 released
oh dear. it is only when you look back on things do you realise how stupid you can be.
i honestly don't know the reason i jumped to that conclusion, but anyway - thanks for correcting me. turned Curl on and voila! all good : )
cheers again.
andrejs
-
Re: ozpost shipping module v2.0.7 released
Quote:
Originally Posted by
ALiepinieks
oh dear. it is only when you look back on things do you realise how stupid you can be.
Tell me about it... I just messed up our DNS a short while ago and it's going to take up to 90mintues for the corrected data to propagate ... meanwhile you may (or may not) find the server is inaccesible. <Yoiks>
For those that are interested, I'm currently in the process of setting up a replicant server for the ozpost quotations ... not that it is *needed* at the moment, but having having a fallback server should help avoid congestion problems or total failure if one of the servers goes down for any reason.
Cheers
Rod
-
ozpost no longer free?
Is there only a paid version of the ozpost shipping module, or are there other free modules that support Australia Post options?
I have no problem being charged for software, especially since it seems quite comprehensive, but since I only use a few of the options, $9.95pm seems a little steep for a low volume shop.
-
Re: ozpost shipping module
-
Re: ozpost shipping module
Regarding the monthly fee per shop:
I have my main store under /store/ and a small wholesale version under /wholesale/.
The wholesale site has just a small amount of products that I offer wholesale pricing to businesses. Both sites are currently using the ozpost module.
Will I have to pay the monthly fee for both sites? If yes, would it be better for me to implement the dual pricing mod on my main site??
Thanks
Robyn
-
Re: ozpost shipping module
Quote:
Originally Posted by
RodG
Whether you upgrade or not is unimportant. It is the *server* that is imposing the fees, so it won't matter which version of the client is being used it will cease to provide quotes sixty days from the first time the server is accessed (starting from July 11th)
If you *don't* upgrade this may come as a bit of a shock. If you DO upgrade at least you'll be getting constant feedback as to how long you have left.
I'm running v2.0.6 and I'm not getting any messages telling me how long I have left.
I notice, though, that there's a message at the top telling me there's a version 2.0.8, so maybe I need to upgrade some more.
Another install I have which I still need to update there's no messages at all.
I appreciate the reasons why you have chosen to make this a paid service, and will look into it myself, but there must be STACKS of people out there with this module installed who have no idea what's going on.
I know I don't go into my ZC store every day to check the postage quotes are working! I only found out this time because a customer emailed me, that's how I found there was an upgrade to 2.0.6.
I guess my point is - if your client base don't know what's happening, you're going to miss out on a lot of potential clients. I'm one, and yet looking at this thread it doesn't seem that many people make it to this forum. How many more don't even know they have a problem at this stage, or won't think to come here if they do?
A certain number of your clients will be professional developers who keep their finger on the pulse, but there most also be plenty of novices like me who only run one or two sites and aren't exactly tech savvy and up to date with every change.
I don't have any idea how you could make the changes known to current customers, but it would be a shame if you don't because lots of people will be unaware and you'll miss out on converting them to paying customers. But then again if you're okay with that, that's your choice!
And people who find out by accident down the track are possibly going to be very ticked off that their store has been dysfunctional for quite a while without any warning.
-
Re: ozpost shipping module
Ok, at least I'm not imagening things... looks like the service IS now a paid addon.:(
Perhaps I should also point out that the module is listed on the Zen-Cart site as "Free Software Addons", which is a little misleading.
Although I do understand that the author has put a lot of effort into this module, it is a little disappointing that it's no longer free, considering the whole Zen-Cart soft IS free.
For major online stores this cost may be insignificant, but I find the monthly fee quite steep... a once-off fee I would consider to be more reasonable.
Perhaps a cut-down free version is an option, and those that want all the bells and whistles to pay for more?
-
Re: ozpost shipping module
Did this turn into drug-dealer-ware whilst I was looking away for a moment?
:ohmy:
-
Re: ozpost shipping module
Quote:
Originally Posted by
robbie269
Will I have to pay the monthly fee for both sites?
If both stores have the same name then one fee will cover both.
-
Re: ozpost shipping module
Quote:
Originally Posted by
Lissy
I'm running v2.0.6 and I'm not getting any messages telling me how long I have left.
This was added in 2.0.8
Quote:
Originally Posted by
Lissy
I notice, though, that there's a message at the top telling me there's a version 2.0.8, so maybe I need to upgrade some more.
Correct.
Quote:
Originally Posted by
Lissy
Another install I have which I still need to update there's no messages at all.
This would probably be a V1.x.x installation.
Quote:
Originally Posted by
Lissy
I appreciate the reasons why you have chosen to make this a paid service, and will look into it myself, but there must be STACKS of people out there with this module installed who have no idea what's going on.
I don't know about "Stacks" - but yes, I am quite aware that there will be a number of people that will be caught out by the recent changes.
Quote:
Originally Posted by
Lissy
I know I don't go into my ZC store every day to check the postage quotes are working!
Which is why I have given two months free access... which I consider to be more than reasonable. Any merchant that doesn't routinely check all site functionality at least once a month is simply asking for trouble anyway.
Quote:
Originally Posted by
Lissy
I guess my point is - if your client base don't know what's happening, you're going to miss out on a lot of potential clients. I'm one,
Correction... you WERE one, you aren't any longer ... :-)
Quote:
Originally Posted by
Lissy
and yet looking at this thread it doesn't seem that many people make it to this forum.
This may well be true too - But what are the other options?
Quote:
Originally Posted by
Lissy
How many more don't even know they have a problem at this stage, or won't think to come here if they do?
A certain number of your clients will be professional developers who keep their finger on the pulse, but there most also be plenty of novices like me who only run one or two sites and aren't exactly tech savvy and up to date with every change.
This is one of the problems with the current methology - There is no easy way for me as a developer to communicate important changes to all users.
I started to address this issue almost two years ago with the release of V2.x.x, which as you have noticed, gives feedback as to when updates are available. Those that follow the upgrade path will be/are kept up to date with new changes.
However, some people are still using V1.x.x (and even the no longer working "AustPost" module). I have no means of contacting them, and I suspect most of those stores have long been deserted anyway. Either way, how far back in time am I expected to go in order to cater to those completely out of touch?
Quote:
Originally Posted by
Lissy
I don't have any idea how you could make the changes known to current customers,
At least this won't be an issue in the future... Not only will the current V2.x.x version control system keep users informed of any upgrades (when they access the module), the registration system will also provide a means to contact merchants via email about any updates.
A number of people have already asked for and/or suggested some kind of registration system for the sole purpose of keeping them updated, so this entire change has really just been a natural progression.
Quote:
Originally Posted by
Lissy
but it would be a shame if you don't because lots of people will be unaware
It is only a matter of time before they do become aware. It may come as a bit of a surprise to some, but I still feel I have done all I be reasonably expected to do.
Quote:
Originally Posted by
Lissy
and you'll miss out on converting them to paying customers. But then again if you're okay with that, that's your choice!
Well, yes, I am OK with it. At the moment I am pretty much single handledly supporting hundreds of users and getting pretty much nothing in return. I'm sure I'll be much happier with just a few paying customers to support, and I'd be a fool to expect to get rich out of this - All I'm aiming for is a little financial aid to help offset some of the time and effort involved.
If I happen to miss out on one or two possibly paying customers that haven't updated their store in the last two years then I'm probably on a good thing. :-)
Quote:
Originally Posted by
Lissy
And people who find out by accident down the track are possibly going to be very ticked off that their store has been dysfunctional for quite a while without any warning.
I agree entirely .... but I think that is something I can live with. Besides, they probably wouldn't be any more ticked off than some others that ARE aware of the impending changes.
I can't please everyone, and I quite possibly haven't pleased anyone, but that doesn't change the fact that support does cost time (and money). In the early days people were appreciative of the acheivements made, these days, people expect it to be their right to get free service and free support, to the extent where they'll often get abusive if they don't get it. I don't want or need that any longer. ,
It really won't bother me if *no one* registers or supports the service because I really won't be any worse of than I am now. How could I be?
Cheers
Rod
ps. A few people have already updated their registration, so 'no one' is a bit of an exaggeration..
-
Re: ozpost shipping module
Quote:
Originally Posted by
ttfan
Ok, at least I'm not imagening things... looks like the service IS now a paid addon.:(
That wasn't what you originally asked.
Quote:
Originally Posted by
ttfan
Perhaps I should also point out that the module is listed on the Zen-Cart site as "Free Software Addons", which is a little misleading.
The client software (module) is, and always will be 100% free. It has been released under GPL licence.
There is also a similar Free module for osCommerce, and another in the works for OpenCart ... more carts will follow.
Quote:
Originally Posted by
ttfan
Although I do understand that the author has put a lot of effort into this module, it is a little disappointing that it's no longer free, considering the whole Zen-Cart soft IS free.
What about the PayPal modules? They are also Free, but you need to subscribe to the PayPal service in order to make use of them.
What about the Banking modules? Also Free, but you do need a suitable bank account to make use of them - All(?) banks have charges.
The ozpost shipping module is no different... it is Free, but you now need to subscribe to the service in order to use it.
Quote:
Originally Posted by
ttfan
For major online stores this cost may be insignificant,
but I find the monthly fee quite steep...
PM me the name of your store and how much you would consider to to be a reasonable payment.
Quote:
Originally Posted by
ttfan
a once-off fee I would consider to be more reasonable.
The problem with 'once off' fees - is that it raises the issue of upgrades. If people don't upgrade they run the risk of running vulnerable/expoitable software, so to avoid this, the upgrade should ideally be free, but from a business sense that doesn't work unless the initial outlay is exhorbantly high so as to offset future development and upgrades. The idea of chargable upgrades does tend to work in many instances, but then it is no longer a 'once off' fee is it. I could push out a dozen upgrades a year just to get more 'upgrade fees'.
Quote:
Originally Posted by
ttfan
Perhaps a cut-down free version is an option, and those that want all the bells and whistles to pay for more?
You've already got that.... When the registration expires, only the static rates will be used... That's a cut down version, isn't it? (Hey, it is better than not working at all).
Cheers
Rod
-
Re: ozpost no longer free?
Quote:
Originally Posted by
ttfan
but since I only use a few of the options, $9.95pm seems a little steep for a low volume shop.
This is akin to Staying in an expensive hotel and then asking for budget rates because you didn't use all of the amenities available to you, or only wanting to pay half price for a car because you only drive half the distance of everyone else.
Nonetheless, I'm flexible ... as per previous message, email me withj the name of your store and how much you think is reasonable and we'll see if we can come to some sort of agreement. (my acceptance of any offer is subject to any statistical data that I have available for your store).
Cheers
Rod
-
Re: ozpost shipping module
Quote:
Originally Posted by
RodG
You've already got that.... When the registration expires, only the static rates will be used... That's a cut down version, isn't it? (Hey, it is better than not working at all).
Cheers
Rod
Thanks for all your answers RodG!
Can you please explain this last bit? That does sound quite reasonable. Which rates are static?
At this point in time, I can get away with rates just based on weight, which is what I'm currently using in the OSC shop.
-
Re: ozpost shipping module
Rod, can I pm you please? Your message box is full but I am having 60 extra days tacked on to the registration time - not what you will want. Thanks.
-
Re: ozpost shipping module
Quote:
Originally Posted by
ttfan
Thanks for all your answers RodG!
Can you please explain this last bit? That does sound quite reasonable. Which rates are static?
Cost per kg / Cost per Item
-
Re: ozpost shipping module
Quote:
Originally Posted by
tpeck
Rod, can I pm you please? Your message box is full
It wouldn't be if everyone read my tagline :dontgetit
Quote:
Originally Posted by
tpeck
but I am having 60 extra days tacked on to the registration time
Shhh.... don't tell anyone else they'll want it too.
Quote:
Originally Posted by
tpeck
- not what you will want. Thanks.
My way of saying thanks for the new icons. :-)
Cheers
Rod
-
Re: ozpost shipping module
Thanks mate! - mum's the word. I've emailed you about a coupla other things...
-
Re: ozpost shipping module
Quote:
Originally Posted by
RodG
Cost per kg / Cost per Item
Hmm Ok... not sure if that's a lot of use to most people... seems to allow only a single shipping cost for AU or the world...
