Image Handler 2 (for ZC v1.3.8 ONLY) Support

[pjthebest]

Which Rev8 release?? The initial release or one of the a, b, c, d incremental releases???



**sigh**


We need the USUAL compliment of information that we always ask for here..

• Link to your site (specifically links DIRECTLY to the products which work correctly AND links to the ones that don't -- please don't ask folks to fish through your site looking for the issue)
• What are your image settings??

Providing this when you posts helps cut down on back and forth guess sessions.. Much better if you provide FULL information up front.. Thanks

Thank you for your interest.
I tried to install the rev8D on this site.

As you can see, the only result i obtained is the problem inside the products pages where the image big is not shown.

These are the IH settings:

• IH resize images yes
• IH small image filetype no_change
• IH small image background 255:255:255
• IH watermark small images no
• IH zoom small images yes
• IH small image compression quality 85
• IH small image hotzone no
• IH medium image filetype no_chang
• IH medium image background 255:255:255
• IH watermark medium images no
• IH medium image compression quality 85
• IH large image filetype no_change
• IH zoom medium images no
• IH medium image hotzone no
• IH large image background 255:255:255
• IH watermark large images no
• IH large image compression quality 85
• IH large image maximum width 750
• IH large image maximum height 550
• IH watermark gravity Center
• IH zoom gravity SouthEast

[pjthebest]

P.S. thank you very much!

[DivaVocals]

What are the rest of your image settings.. IH uses them in addition to the IH2 sepecific settings..

From what I can see IH2 is not managing your images at all.


You need to recheck the following:

• Did you turn IH2 on? (as in admin --> tools --> Imagehandler2 --> Install image handler)
• Did you check all your image settings (there are recommended/suggested image settings in the readme)
• Did you correctly install IH2 (renamed template and admin folders to match your store's template and admin folders)
• Did you skip any install steps (sometimes folks decide an install step is silly/unimportant, and that is often a BIG cause of module install failures)

It is likely that one or a combination of these steps is the cause of your IH2 setup not working as it should.

Lastly where did you get your template from?? What I have seen more often than not is theme companies (like Template Monster or their affliate sites) who have created themes which do not use standard Zen Cart code and thus interfere with module installations. If your theme fileset included files modified by IH2 it's highly possible that whatever customizations they made to those files are not properly merged in with IH2's required coding.

Thank you for your interest.
I tried to install the rev8D on this site.

As you can see, the only result i obtained is the problem inside the products pages where the image big is not shown.





These are the IH settings:

• IH resize images yes
• IH small image filetype no_change
• IH small image background 255:255:255
• IH watermark small images no
• IH zoom small images yes
• IH small image compression quality 85
• IH small image hotzone no
• IH medium image filetype no_chang
• IH medium image background 255:255:255
• IH watermark medium images no
• IH medium image compression quality 85
• IH large image filetype no_change
• IH zoom medium images no
• IH medium image hotzone no
• IH large image background 255:255:255
• IH watermark large images no
• IH large image compression quality 85
• IH large image maximum width 750
• IH large image maximum height 550
• IH watermark gravity Center
• IH zoom gravity SouthEast

[nolsowski]

I see no trace of Image Handler apart from the CSS & JS files being included

make sure all the files have uploaded from Image handler

that means all of those in the "YOUR Template" folders in the both the modules and templates sections

/includes/modules/alysa_rounded/
&
/includes/templates/alysa_rounded

I have re uploaded the whole thing and made sure it was installed in the admin and it still doesn't work. I noticed that it works great for my additional images like here http://frompropertorocker.com/index....roducts_id=163 but it doesn't seem to work on any small images.

[DivaVocals]

I have re uploaded the whole thing and made sure it was installed in the admin and it still doesn't work. I noticed that it works great for my additional images like here http://frompropertorocker.com/index....roducts_id=163 but it doesn't seem to work on any small images.

Check your image settings.. There are suggested settings in the readme file. Right now IH2 is NOT managing your images at all.. The only thing that is working is the image hover.. and that is largely driven by the IH2 settings and the IH2 javascript.. What IH2 is supposed to do (manage your images) is not happening on your site at all..

Same suggestions to you I just asked above..


You need to recheck the following:

• Did you turn IH2 on? (as in admin --> tools --> Imagehandler2 --> Install image handler)
• Did you check all your image settings (there are recommended/suggested image settings in the readme)
• Did you correctly install IH2 (renamed template and admin folders to match your store's template and admin folders)
• Did you skip any install steps (sometimes folks decide an install step is silly/unimportant, and that is often a BIG cause of module install failures)

It is likely that one or a combination of these steps is the cause of your IH2 setup not working as it should.

Lastly where did you get your template from?? What I have seen more often than not is theme companies (like Template Monster or their affliate sites) who have created themes which do not use standard Zen Cart code and thus interfere with module installations. If your theme fileset included files modified by IH2 it's highly possible that whatever customizations they made to those files are not properly merged in with IH2's required coding.

[nolsowski]

Check your image settings.. There are suggested settings in the readme file. Right now IH2 is NOT managing your images at all.. The only thing that is working is the image hover.. and that is largely driven by the IH2 settings and the IH2 javascript.. What IH2 is supposed to do (manage your images) is not happening on your site at all..

Same suggestions to you I just asked above..


You need to recheck the following:

• Did you turn IH2 on? (as in admin --> tools --> Imagehandler2 --> Install image handler)
• Did you check all your image settings (there are recommended/suggested image settings in the readme)
• Did you correctly install IH2 (renamed template and admin folders to match your store's template and admin folders)
• Did you skip any install steps (sometimes folks decide an install step is silly/unimportant, and that is often a BIG cause of module install failures)

It is likely that one or a combination of these steps is the cause of your IH2 setup not working as it should.

Lastly where did you get your template from?? What I have seen more often than not is theme companies (like Template Monster or their affliate sites) who have created themes which do not use standard Zen Cart code and thus interfere with module installations. If your theme fileset included files modified by IH2 it's highly possible that whatever customizations they made to those files are not properly merged in with IH2's required coding.

Thanks. I will go through the whole checklist again.

I got my template here http://www.zen-cart.com/index.php?ma...oducts_id=1802

[DivaVocals]

Thanks. I will go through the whole checklist again.

I got my template here http://www.zen-cart.com/index.php?ma...oducts_id=1802

Okay.. so no worries on the template.. She designs well written templates (none of that hacked up Template Monster crap..)

[nolsowski]

Okay.. so no worries on the template.. She designs well written templates (none of that hacked up Template Monster crap..)

Lol! I'm glad on that.

[nolsowski]

I got it! Thanks so much! I went through and did the recommend settings for the images. :)

[DivaVocals]

I got it! Thanks so much! I went through and did the recommend settings for the images. :)

Are you saying it's fixed?? Because I still do not see your images beig served up from the bmz_cache folder..