Image Handler 2 (for ZC v1.3.8 ONLY) Support

woodlandsprite:

I'm receiving an error when viewing my shop in IE.
This does not happen in Firefox.

I believe it's tied to having the zoom turned on for small images - and the zoom is not functioning on IE (though it works great in Firefox)

The IE error is:
Line: 125
Char: 7
Error: 'pageY' is null or not an object
Code: 0
URL: http://spritelygoods.com/zencart1301/index.php?main_page=index&cPath=2_8

I'm running Zencart 1.3.0.1
and Image Handler 2.

Thanks for your help!

I'm having this exact problem as well. I modified the jscript_imagehover.js file as recommended on the breakmyzencart forums, but the problem is still there. The only instances of 'pageY' in my file are as follows:

if (docheight - e.pageY < zoomimg_h + (2 * padding)){
      ycoord += e.pageY - Math.max(0,(0 + zoomimg_h + (5 * padding) + e.pageY - docheight - truebody().scrollTop));
    } else {
      ycoord += e.pageY;

Any suggestions? Thanks so much - I'm totally new to all this...

exact same pageY problem here...i tried to figure out what is going wrong but cannot seem to get any closer to a solution.
Help would be highly appreciated!!!

change the pageY's to clientYs and see if that fixes your issue.

woodlandsprite:

change the pageY's to clientYs and see if that fixes your issue.

Yes! That seems to have worked! Thanks woodlandsprite!

i found 3 or 4 PageY's in tje .js file and changed them to ClientY.... no errors no more.. yet ;-) for before it also seemed to not always occur.

THANKS for the tip!

Someone please... ?!

I'm trying to use IH2 on Z126, everything seems perfect except additional images not working, any clues? I haven't switched to Z130 cause the payment module I'm still using only works on Z126.

TIA!

Hi all....I just downloaded this contribution and it seems great, but I am getting a ton of errors.

I am getting the following:

Fatal error: Call to a member function on a non-object in /homepages/44/d107892304/htdocs/modernhq/includes/modules/pages/popup_image/header_php.php on line 18

I am guessing this is in the extra definitions file and I actually copied those definitions into the english language file but it still does not work.

Does anyone have any ideas or recieved a large number of these errors???

Thank you in advance

Rob

zenist:

Someone please... ?!

I'm trying to use IH2 on Z126, everything seems perfect except additional images not working, any clues? I haven't switched to Z130 cause the payment module I'm still using only works on Z126.

TIA!

i posted on this before - was this functionality removed from IH2?

I too am having tourbles with IH2. I've just upgraded to 1.3.0.1 and had been using the previous version in 1.2.7. Since the upgrade, I'm getting inconsistent results, which is even harder to pin down. Some of my previous additional images are showing up, and some are not. When I go into IH2 to adjust the images, on some of my products the application aborts and I actually have to unplug my router and cable modem to get IE to work again.

Plus, on the new product entry screen, the functionality is no longer there to add multiple images, so the only apparant way to do it is with the admin interface, which is a bummer if that's the "new and improved" method. I haven't found documentation on the "search for old ih 1.x images." Could that fix the problem?

Slapo:

hi guys,

I need some help here:
I've installed image handler, both in zencart on my box and the one that's going to be the production server.
However, when I upload an image, the resized versions are diplayed only in image handler section in admin, not elsewhere (and not in the catalog). The original images are shown instead.
Now, I think I've seen a post with a solution to this or a post linking to a solution, but I wasn't able to find it so far :(
safe_mode off, btw.

Thanks for any help on this :)

I also have this problem. Running 1.3.0.2. When I was testing it'd show images in the admin section under (Tools/IH2) although clicking to preview them or whatever would show nothing. I also got pictures when viewing the categories, but no pictures on the actual product pages. Just the links that would result in no picture also. I was seeing some encoded .jpg being created under the bmzcache folder, but the links on the product pages were to the _MED, etc.

If you added IH2 THEN upgraded to 1.3.0.2 you would have overwritten some catalog files (ie not admin) that are needed to show the images.
You need to compare the html_output.php file that is overwritten and make the changes to the file.
From memory there are 2 lines that are different :wink2:

Your memory is correct - first line in the comments, 2nd line # 36 - changed to:
if ($connection == 'SSL' && ENABLE_SSL == 'true') {

Reesy:

If you added IH2 THEN upgraded to 1.3.0.2 you would have overwritten some catalog files (ie not admin) that are needed to show the images.
You need to compare the html_output.php file that is overwritten and make the changes to the file.
From memory there are 2 lines that are different :wink2:

Not sure who you were responding too, but I was trying to install IH2 after upgrading to 1.3.0.2. Not sure really what is causing images to not display on product pages, but in the category views.

What I am kind of understanding from this thread is that I should install IH1.3.0.2 and then upgrade to IH2....I am so confused.

Webrob and others:
You should use WinMerge or some other file comparison utility to check the files included in the v 1.3.2 patch to those that are affected by the IH2. Make the appropriate adjustments to the IH2 files (or vice versa depending on how many changes need to be made) and install them.

kelvyn:

Just a thought, but are you actually USING the template named "custom"? You can make a template, but until you go into admin and activate it, it won't do anything.

Yes, the custom file is active in admin (it is the one I've been using now for 8 months...)

I still haven't solved the promlem listed below...any ideas???

Promblem:
I'm running 1.2.7...I have the additional pics loaded into H2...they are showing up in admin but they are not on the catalog end...

I took the tpl_main_page.php, which is located in /includes/templates/template_default/popup_image_additional... and FTP'd it over to my custom folder (includes/templates/custom/popup_image_additional)..This didn't work... I couldn't find any other additional_images php files in the template_default folder... Am I missing a file? Or could there be another solution...

Hi,

My popup doesn't resize when openning a large image since I have installed this mod on a new 1.3 Zencart. I have installed it on other stores without this problem occuring. I guess I must have messed up somewhere. Any ideas where to start looking for my error(s) as so far no luck.

Thnks in advance.

hi,
My image handler is not functioning correctly. could this be a bug? I tested it on a whole new cart and it still acted funny. here is the cart i tested it on:
http://www.shopjackiesjewels.com/store/index.php?main_page=product_info&products_id=2
the images at the bottom wont zoom however if you go to the new products page or the home page it does zoom. then on this page:
http://www.shopjackiesjewels.com/store/index.php?main_page=product_info&cPath=2&products_id=4 i added an additional image to the present necklace and the second image didnt even show up! whats wrong with my image handler?

woodlandsprite:

Webrob and others:
You should use WinMerge or some other file comparison utility to check the files included in the v 1.3.2 patch to those that are affected by the IH2. Make the appropriate adjustments to the IH2 files (or vice versa depending on how many changes need to be made) and install them.

I'm confused. All the files in the IH2 package that I'm replacing are the original 1.3.0.2 files. So, I should just have to take the IH2 versions and replace the 1.3.0.2 versions correct? The installation speaks nothing about comparing the 1.3.0.2 files against IH2 files and modifying the 1.3.0.2 files? Shouldn't the IH2 package contain the proper files?

Also, does anyone use ImageMagick? If it's installed on the server do you need to make any changes to the IH2 code? How does it determine whether to use GD libraries or ImageMagick?