Image Handler 2 (for ZC v1.3.8 ONLY) Support

testuser:

When hovering small image, your medium image is shown. If you have all your images set to the same size under Configuration :: Images you won't notice a difference.

Remember the easiest way to use Image Handler is not to get carried away with it's own Image Functions and just let it do it's work. In other words, just upload your "Highest Quality" image when adding or editing a product - then let IH do the work.

I was try to change many dimensions but it seem it not work....

This is image :D

kimsonvu:

I was try to change many dimensions but it seem it not work....

How big is the image your uploading?

testuser:

How big is the image your uploading?

I upload bigest image in 1600x1200 but i just setup in 450x350

This is another image:

kimsonvu:

I upload bigest image in 1600x1200 but i just setup in 450x350

I just had a look at your site and it appears IH is working as it should. Where again are the discrepancies?

This is my means:

and i don't know how to config this .....:cry:...i use paint and it is ugly :D

kimsonvu:

This is my means:

and i don't know how to config this .....:cry:...i use paint and it is ugly :D

Change Product Info - Height & Product Info - Width to suit your liking. The hover image is based on the height and width of Main Product Image on the Product Info page.

Changing this will also change the height and width of the main product image when viewing a product.

testuser:

Change Product Info - Height & Product Info - Width to suit your liking. The hover image is based on the height and width of Main Product Image on the Product Info page.

Changing this will also change the height and width of the main product image when viewing a product.

Ok Thanks!I changed it but it also change the height and width of the main product image.Do you know any way to do not change height and width of the main product image when viewing a product?

kimsonvu:

Ok Thanks!I changed it but it also change the height and width of the main product image.Do you know any way to do not change height and width of the main product image when viewing a product?

The pop-up image you get is dependent upon the height and width of the main product image.

Hi everyone,

I was wondering... I would like to add the zoom hover on the products in the Product Listing page.

I am using the columnar module.

and small or medium doesn't affect them.

is there something I can do?

thanks in advance...

Hi everybody,

Can anyone tell why my popup images are not showing up, as well as the image rollover? I've been searching for hours and can't come up with any answers.

Site: http://musiciansbest.com/store/index.php?main_page=product_info&cPath=532_535&products_id=1542

THanks!
-Joey

ellispiano:

Hi everybody,

Can anyone tell why my popup images are not showing up, as well as the image rollover? I've been searching for hours and can't come up with any answers.

Site: http://musiciansbest.com/store/index.php?main_page=product_info&cPath=532_535&products_id=1542

THanks!
-Joey
Looking at th eimage properties, it is looking for the image at this path.
http://musiciansbest.com/store/images/uploads/472068.jpg
Double check and make sure it is there. Or correct the path.

[Edit] When I try and access that path I get:
Forbidden
You don't have permission to access /store/images/uploads/472068.jpg on this server.

double check the permissions on that folder...

JOhn ><>

ellispiano:

Hi everybody,

Can anyone tell why my popup images are not showing up, as well as the image rollover? I've been searching for hours and can't come up with any answers.

Site: http://musiciansbest.com/store/index.php?main_page=product_info&cPath=532_535&products_id=1542

THanks!
-Joey

Why are you uploading your images to the upload directory? I think that directory is .htaccess protected.

EDIT: It is, try uploading your images to another sub-directory or leave them in the main images folder. And make sure the bmz_cache folder is 777.

John,

Do you by any chance, know how to make the product images in the product listing page. zoom with rollovers?

i feel like i must be missing something obvious... and i'm going crazy.

thanks...

thanks! that worked! ONE MORE QUESTION...
how do i get the "click for maore images" link to show up when i've got more than one image for a product? i've uploaded a few to this product: http://musiciansbest.com/store/index.php?main_page=product_info&cPath=532_535&products_id=1542
and i can only see the default image. any more ideas?

THANKS!

I'm having a problem with IH2 on a 1.3.5 install of ZenCart when some images uploaded using the module break the delivery of pages in both the admin system and the shop itself at the point at which they are meant to load.

ie: The HTML stops dead!

When the uploaded files are removed manually using FTP the problem disappears.

Can anyone advise?

Just moved my site to a new server and with the new setup, i notice that anytime i upload a new image, i get the noboby apache user and group ownership, which causes the image caching to not work. now when i visit the site, the pics get regenerated every time and it loads very slowly because of it.

i've seen others with the same problem, but i've yet to find an answer through searching the forums. i've also had to set the bmz_cache folder to 777 , and if i clear the 0, 1, 2 etc folders out, they get recreated, but nothing gets put into those individual folders.

any help would be much appreciated, as our old server crashed and we had to go with a new host...would very much like to get our site loading up much quicker.

thanks!

peeceelee:

Just moved my site to a new server and with the new setup, i notice that anytime i upload a new image, i get the noboby apache user and group ownership, which causes the image caching to not work. now when i visit the site, the pics get regenerated every time and it loads very slowly because of it.

i've seen others with the same problem, but i've yet to find an answer through searching the forums. i've also had to set the bmz_cache folder to 777 , and if i clear the 0, 1, 2 etc folders out, they get recreated, but nothing gets put into those individual folders.

any help would be much appreciated, as our old server crashed and we had to go with a new host...would very much like to get our site loading up much quicker.

thanks!
Did you try to set all folders inside bmz_cache to 777, then all images inside those folders to same?
To set bmz_cache to 777 is not enough.
Try using ctrl + a to select all images inside a folder and set to 777.

ok, i looked in my old bmz cache folders and noticed that the files are not always updated everyday. so i decided to give it a couple days for the cache to get written to, and after a couple days i do see a few new files so i guess things are working ok. i expected an empty cache to immediately fill as i hit the site, but i guess it doesn't work that way.

also, i did have bmz_cache set to 777 along with the subfolders also.

ckosloff:

Did you try to set all folders inside bmz_cache to 777, then all images inside those folders to same?
To set bmz_cache to 777 is not enough.
Try using ctrl + a to select all images inside a folder and set to 777.

Hi all,
I am starting to get paranoid about adding modules after the web site is finished as I get errors quite a lot.

I have added IH2 before with no problems but this time my admin login has disappeared and I get a blank page with the following error.

Warning:  main() [function.main]: Unable to access /home2/mywebsite/public_html/products/includes/functions/extra_functions/functions_bmz_image_handler.php in /home2/mywebsite/public_html/products/adminxxx/includes/functions/extra_functions/functions_bmz_image_handler.php on line 12

Warning:  main(/home2/mywebsite/public_html/products/includes/functions/extra_functions/functions_bmz_image_handler.php) [function.main]: failed to open stream: No such file or directory in /home2/mywebsite/public_html/products/adminxxx/includes/functions/extra_functions/functions_bmz_image_handler.php on line 12

Fatal error:  main() [function.require]: Failed opening required '/home2/mywebsite/public_html/products/includes/functions/extra_functions/functions_bmz_image_handler.php' (include_path='.:/opt/php4/lib/php') in /home2/mywebsite/public_html/products/adminxxx/includes/functions/extra_functions/functions_bmz_image_handler.php on line 12

Now I can't get into my admin at all:cry:

Fixed:blush:

I hadn't uploaded two files and was looking in the wrong directory.
Just a couple I missed.
:blush::blush::blush: