Zen Cart Logo
Forums / Addon Shipping Modules / Region Tables 1.0.0 Released!

Region Tables 1.0.0 Released!

Views: 54,423

Results 141 to 160 of 166
18 Feb 2008, 5:58 PM
#141
ekles avatar

ekles

New Zenner

Join Date:
Aug 2005
Posts:
73
Plugin Contributions:
0

Region Tables 1.0.0 Released!

jamesbarsalou:

My current situation is:

I am only shipping inside the U.S.

I have 7 zones within in the US. Each zone is based on zip code.

There is 3 methods of shipping (ground, ground to P.O. Boxes, and DHL 'rush').

There are 3 categories which determine the % rate of charge for shipping based on zone (orders less than $30, orders between $30-$499.99, and orders $500 and over).

Below is a chart displaying what I have explained above:

How can this be executed? Anything will help at this point. Thanks!

If I read your question right here we go

First of all in the setup section of the module do the following

set up calculation method as Price
Number of regions 7
Number of shipping types as 3

At this stage I would update this.

Go back into the module

Enter the zip codes for this region 1. Use blocks such as US:12458-25489,US:29874=31564, etc etc

Below this now you will see the 3 shipping type blocks. Lets say they are in the order of
Ground = Method 1
ground to PO = method 2
DHL = method 3

enter as follows in method 1 for Ground in region 1
29.99:xxx,499.99:xxxx,999999=xxxx where xxx = the shipping cost

In method 2 do the same for ground to PO box

and in method 3 DHL

Repeat this for each of the regions.

Once you have done this you need to modify the language file so everyone knows what you are on about

Go to includes/languages/english/modules/shipping/YOUR_Template/ and modify the regiontables.php file.

Example

define('MODULE_REGION_TABLES_REGION_1_TITLE', 'Northe East USA');
define('MODULE_REGION_TABLES_REGION_1_METHOD_1_TITLE', 'Ground Delivery approx 5 working days');
define('MODULE_REGION_TABLES_REGION_1_METHOD_2_TITLE', 'Ground to PO Box approx 5 days');
define('MODULE_REGION_TABLES_REGION_1_METHOD_3_TITLE', 'DHL RUSH Approx 2 working days.');

Do the same for each region and presto it's done.

If you wish to see it in action

https://www.golfuni.com.au/shop/ - Be aware this is an active shop but you can add something to your bag and click estimate shipping. For your assistance For the State use New South Wales postcode 2100. If you then update your location to Victoria 3125 you will see there are 3 shipping options instead of two on this one.

Hope this helps

19 Feb 2008, 1:56 AM
#142
jamesbarsalou avatar

jamesbarsalou

New Zenner

Join Date:
Feb 2008
Location:
Sunny CA
Posts:
9
Plugin Contributions:
0

Re: Region Tables 1.0.0 Released!

Thank you very much for your help!

I've installed and set up the most I can and have ran into another problem. My shipping is based and calculated on a percentage (%) of the total amount.

For example if the total cost of your shopping cart is $50 and you are in Zone 2, then shipping ground is 15%, which would equal $7.50 for shipping.

I have far too many products which change very often, to be calculating shipping costs for each individual product. (Or maybe I'll have to.)

Is there any way Region Tables can accomplish this; calculating shipping costs based on a percentage of the total?

19 Feb 2008, 5:26 AM
#143
ekles avatar

ekles

New Zenner

Join Date:
Aug 2005
Posts:
73
Plugin Contributions:
0

Re: Region Tables 1.0.0 Released!

jamesbarsalou:

Thank you very much for your help!

I've installed and set up the most I can and have ran into another problem. My shipping is based and calculated on a percentage (%) of the total amount.

For example if the total cost of your shopping cart is $50 and you are in Zone 2, then shipping ground is 15%, which would equal $7.50 for shipping.

I have far too many products which change very often, to be calculating shipping costs for each individual product. (Or maybe I'll have to.)

Is there any way Region Tables can accomplish this; calculating shipping costs based on a percentage of the total?

If you send me a PM with your order value brackets & the % amounts you charge for freight I'll quickly set a method price list for you. Takes about 5 minutes to do.

19 Feb 2008, 7:49 AM
#144
jamesbarsalou avatar

jamesbarsalou

New Zenner

Join Date:
Feb 2008
Location:
Sunny CA
Posts:
9
Plugin Contributions:
0

Re: Region Tables 1.0.0 Released!

ekles:

If you send me a PM with your order value brackets & the % amounts you charge for freight I'll quickly set a method price list for you. Takes about 5 minutes to do.

This is all I have:

28 Feb 2008, 2:52 AM
#145
daneh avatar

daneh

Zen Follower

Join Date:
Dec 2007
Location:
Southern Maine
Posts:
268
Plugin Contributions:
0

Re: Region Tables 1.0.0 Released!

I am using the most recent version 1.4 and I have set up the zones tables, (twice actually....LOL), but both times, when I tried the shipping estimator, I don't get the table rates. I get the store pickup, ant the shipping per unit option, but never the zone table rates. I have the tables "installed" through ADMIN/modules/shipping.

Any idea where to look for the problem?

28 Feb 2008, 7:55 AM
#146
ekles avatar

ekles

New Zenner

Join Date:
Aug 2005
Posts:
73
Plugin Contributions:
0

Re: Region Tables 1.0.0 Released!

daneh:

I am using the most recent version 1.4 and I have set up the zones tables, (twice actually....LOL), but both times, when I tried the shipping estimator, I don't get the table rates. I get the store pickup, ant the shipping per unit option, but never the zone table rates. I have the tables "installed" through ADMIN/modules/shipping.

Any idea where to look for the problem?

Did you mark the first option

Enable Region Tables Method to

True or Yes

28 Feb 2008, 11:31 AM
#147
daneh avatar

daneh

Zen Follower

Join Date:
Dec 2007
Location:
Southern Maine
Posts:
268
Plugin Contributions:
0

Re: Region Tables 1.0.0 Released!

Yes. I have checked that option. I was not sure if there was another switch somewhere else that I may have missed.

29 Feb 2008, 12:21 AM
#148
ekles avatar

ekles

New Zenner

Join Date:
Aug 2005
Posts:
73
Plugin Contributions:
0

Re: Region Tables 1.0.0 Released!

daneh:

Yes. I have checked that option. I was not sure if there was another switch somewhere else that I may have missed.

Cut and paste your settings (Use a PM not here) for the module and I can see if there is a problem

28 Apr 2008, 10:43 PM
#149
fuzzball172 avatar

fuzzball172

New Zenner

Join Date:
May 2007
Posts:
30
Plugin Contributions:
0

Re: Region Tables 1.0.0 Released!

conor:

Hi,

We're very pleased to announce the release of Region Tables 1.4.0!

...

Check out the website for more info and downloads...

http://dev.ceon.net/web/zen-cart/regiontables

We hope you like this new release!

The link is dead, any idea where I can get this module?

Thanks
Fuzz

30 Jul 2009, 6:24 PM
#150
timdwyer42 avatar

timdwyer42

Zen Follower

Join Date:
Apr 2009
Posts:
149
Plugin Contributions:
0

Re: Region Tables 1.0.0 Released!

Yeah. The link now goes to a module that costs £50 :(

22 Nov 2009, 1:16 PM
#151
exforme avatar

exforme

New Zenner

Join Date:
Sep 2009
Posts:
2
Plugin Contributions:
0

Re: Region Tables 1.0.0 Released!

Why for open source like this we need to pay for something that important. it became so useless.Can anybody send me region tables or some solution to this problem. Thanks :blink:

22 Nov 2009, 4:54 PM
#152
brent avatar

brent

Totally Zenned

Join Date:
Mar 2005
Location:
United Kingdom
Posts:
606
Plugin Contributions:
0

Re: Region Tables 1.0.0 Released!

You don't have to pay. If you search these forums you will find countless threads covering almost every conceivable shipping configuration and many solutions to problems posed.

If you want to take a short cut and hit the ground running Conor has already done all the work and his module is well worth it.

You just have to decide which route you want to take but complaining about someone who has done an awful lot for this community is counter productive. If you search you'll find he also supports some very good free modules.

17 May 2010, 3:10 PM
#153
sephiroth avatar

sephiroth

New Zenner

Join Date:
Nov 2008
Posts:
24
Plugin Contributions:
0

Re: Region Tables 1.0.0 Released!

anyone else having trouble with the default region (I'm using 1.3.8)?

I'm sure it used to work properly last year, but can't figure out what has changed to cause the problem...

I'm using three regions and each region has three shipping methods...

1st region (local delivery) is the cheapest
2nd region (postcodes our courier delivers to) is the second cheapest
and the 3rd region uses the "catch all" GB for postcodes not used by our courier... by far the most expensive region.

now the shipping estimator shows the third region's prices by default until the user puts their postode in... but most people just see region 3's ridiculously high prices and run away before putting in their postcode for an accurate (and almost definitely cheaper) quote... very frustrating...

(yes, I have tried selecting region 1 as the default in the module's UI)

Many thanks if you can help!

18 May 2010, 11:46 AM
#154
sephiroth avatar

sephiroth

New Zenner

Join Date:
Nov 2008
Posts:
24
Plugin Contributions:
0

Re: Region Tables 1.0.0 Released!

I have tried the module on a fresh install of 1.3.8 and it does the same thing, so I am wondering if it isn't fully compatible with this version of ZC... don't know how it would work on the new one that has just come out...

I've come up with a work around for this problem... instead of using "gb" (the catch all if every other region fails to match) as the final region, I used:

GB:AB,GB:AL,GB:B,GB:BA,GB:BB,GB:BD,GB:BH,GB:BL,GB:BN,GB:BR,GB:BS,GB:BT,GB:CA,GB:CB,GB:CF,GB:CH,GB:CM,GB:CO,GB:CR,GB:CT,GB:CV,GB:CW,GB:DA,GB:DD,GB:DE,GB:DG,GB:DH,GB:DL,GB:DN,GB:DT,GB:DY,GB:E,GB:EC,GB:EH,GB:EN,GB:EX,GB:FK,GB:FY,GB:G,GB:GL,GB:GU,GB:HA,GB:HD,GB:HG,GB:HP,GB:HR,GB:HS,GB:HU,GB:HX,GB:IG,GB:IP,GB:IV,GB:KA,GB:KT,GB:KW,GB:KY,GB:L,GB:LA,GB:LD,GB:LE,GB:LL,GB:LN,GB:LS,GB:LU,GB:M,GB:ME,GB:MK,GB:ML,GB:N,GB:NE,GB:NG,GB:NN,GB:NP,GB:NR,GB:NW,GB:OL,GB:OX,GB:PA,GB:PE,GB:PH,GB:PL,GB:PO,GB:PR,GB:RG,GB:RH,GB:RM,GB:S,GB:SA,GB:SE,GB:SG,GB:SK,GB:SL,GB:SM,GB:SN,GB:SO,GB:SP,GB:SR,GB:SS,GB:ST,GB:SW,GB:SY,GB:,GB:TA,GB:TD,GB:TF,GB:TN,GB:TQ,GB:TR,GB:TS,GB:TW,GB:UB,GB:W,GB:WA,GB:WC,GB:WD,GB:WF	,GB:WN,GB:WR,GB:WS,GB:WV,GB:YO,GB:ZE

which should cover every postcode in the UK... so it is effectively the same as using "gb" except now the shipping estimator doesn't give a quote until the user enters their postcode, thus not scaring the life out of them with ridiculoulsy high shipping costs!

:clap: win

30 Nov 2010, 3:09 PM
#155
tecbrat avatar

tecbrat

Zen Follower

Join Date:
Feb 2005
Posts:
239
Plugin Contributions:
0

Re: Region Tables 1.0.0 Released!

I have not read all 11 pages of this thread, but I clicked the link on the OP and felt a little baited and switched because 1) I didn't think advertising commercial scripts on the forum was allowed and 2) the post mentioned that donations would be appreciated. To go from an expectation of free to a cost of 50 pounds is a bit of a shock.

If this mod was originally written as a free (libre and gratis) mod, can I still aquire the files for that version? Will it work with 1.3.9g?

30 Nov 2010, 3:18 PM
#156
conor avatar

conor

Passed

Join Date:
Aug 2004
Location:
Belfast, Northern Ireland
Posts:
2,480
Plugin Contributions:
4

Re: Region Tables 1.0.0 Released!

Hi,

TecBrat:

I have not read all 11 pages of this thread, but I clicked the link on the OP and felt a little baited and switched because 1) I didn't think advertising commercial scripts on the forum was allowed and 2) the post mentioned that donations would be appreciated. To go from an expectation of free to a cost of 50 pounds is a bit of a shock.

If this mod was originally written as a free (libre and gratis) mod, can I still aquire the files for that version? Will it work with 1.3.9g?

You haven't been baited, the module was discontinued, it didn't work well enough.

As you can see, no-one posts to this thread anymore. I'd rather this thread was deleted entirely.

If you need the functionality originally described for the module then simply write a module and release it yourself.

All the best..

Conor
ceon

30 Nov 2010, 3:30 PM
#157
tecbrat avatar

tecbrat

Zen Follower

Join Date:
Feb 2005
Posts:
239
Plugin Contributions:
0

Re: Region Tables 1.0.0 Released!

conor:

Hi,
...
You haven't been baited, the module was discontinued, it didn't work well enough.

As you can see, no-one posts to this thread anymore. I'd rather this thread was deleted entirely.

If you need the functionality originally described for the module then simply write a module and release it yourself.

All the best..

Conor
ceon

Conor,
I wasn't trying to flame anyone. I'm sorry to hear that the module wasn't working well enough.
I am such a hack, I couldn't come close to writing this module in anything less than a decade.

30 Nov 2010, 3:41 PM
#158
conor avatar

conor

Passed

Join Date:
Aug 2004
Location:
Belfast, Northern Ireland
Posts:
2,480
Plugin Contributions:
4

Re: Region Tables 1.0.0 Released!

Hi,

Sorry if I came across a bit strongly, I didn't mean to. I'm just swamped maintaining, releasing and supporting free Zen Cart updates as it is and the idea of supporting really old software on top of that would be a bit too much for me!

All the best..

Conor
ceon

30 Nov 2010, 4:00 PM
#159
brent avatar

brent

Totally Zenned

Join Date:
Mar 2005
Location:
United Kingdom
Posts:
606
Plugin Contributions:
0

Re: Region Tables 1.0.0 Released!

TecBrat:

Conor,
I wasn't trying to flame anyone. I'm sorry to hear that the module wasn't working well enough.
I am such a hack, I couldn't come close to writing this module in anything less than a decade.

......but yet you expect Conor to do it for you free of charge and you post a rather rude post when you find this is no longer so? :dontgetit

We are lucky that the likes of Conor, the Zen Cart Team and countless other coders have the grace to offer their software free of charge. Just remember though like you they too have to earn a living.

Just food for thought. :smile:

30 Nov 2010, 4:18 PM
#160
conor avatar

conor

Passed

Join Date:
Aug 2004
Location:
Belfast, Northern Ireland
Posts:
2,480
Plugin Contributions:
4

Re: Region Tables 1.0.0 Released!

Hi Brent,

How are you?

Brent:

......but yet you expect Conor to do it for you free of charge and you post

It's okay, I slightly overreacted, he's been polite, not out of bounds at all, slightly crossed lines initially I think.. thanks for looking out for me.. in this case all is okay.

Hope all is with you.. I'd imagine everyone's busy getting ready for Christmas now! :)

All the best..

Conor