Is there a functioning FedEx module for 1.3.8a?

I have the fedex module installed and it will simply not show the rates on the page. In debug mode, you can clearly see that the rates are being returned, however they do not write onto the page. Is this the same problem everyone else is having or is there a simple fix to this isuue that I am missing? Any help would be greatly appreciated.

Merlinpa1969:

There are 2 modules in the download section that work just fine,

and Yes I know how much of a PITA fedex can be, thats why the fedex logos are NOT part of the mod anymore,
cause each cart that used it would have to set it up take a snapshot and submit it to Fedex for approval,

I dealt with them for 3 yearsAhh the FedX guru has spoken!:clap: I just want to make sure I am CRYSTAL CLEAR on the the highlight portion of your statement. The mod being discussed in this thread is the older FedEx module: **FEDEX**

Based on your comment, I ran right over to the add-ons page and I now see that there are two recent (4th Quarter 2008) additions to the FedEx modules offerings:1. **FEDEX XML**
2. **Fedex Automated Shipping Labels**Are these the two modules you speak of, AND can one presume by your mention of these modules that you are of the opinion that these two modules work better than the original **FEDEX** module that many of us have been using (and discussing in this thread)??

DivaVocals:

Ahh the FedX guru has spoken!:clap: I just want to make sure I am CRYSTAL CLEAR on the the highlight portion of your statement. The mod being discussed in this thread is the older FedEx module: **FEDEX**

Based on your comment, I ran right over to the add-ons page and I now see that there are two recent (4th Quarter 2008) additions to the FedEx modules offerings:

2. **FEDEX XML**

3. **Fedex Automated Shipping Labels**

Are these the two modules you speak of, AND can one presume by your mention of these modules that you are of the opinion that these two modules work better than the original **FEDEX** module that many of us have been using (and discussing in this thread)??

I have tried both the original FEDEX module and the FEDEX XML module you mention above, and neither work for me. For some addresses I get rates, for some I get no rates, for some I get rates for some classes, but no rates (i.e., a rate of 0 shows up) for other classes.

We really want to use FedEx, but they are proving to be too difficult to work with.

-- Kimball

quangdog:

I have tried both the original FEDEX module and the FEDEX XML module you mention above, and neither work for me. For some addresses I get rates, for some I get no rates, for some I get rates for some classes, but no rates (i.e., a rate of 0 shows up) for other classes.

We really want to use FedEx, but they are proving to be too difficult to work with.

-- KimballI have never had an issue with the older FEDEX module.. When I get some time I will test the FEDEX XML module.. I was trying to get confirmation that this (FEDEX XML) was one of the modules Merlin was speaking of..

I am having trouble getting this module to work again. I just transfered my server from linux to windows and the information for the FedEx modula did not hold on the transfer. So I repopulated the information and now it shows me a white screen whenever I enter the shipping part of the checkout process. It also gives me a blank page when i click the "estimate shipping" button.

Warning; I am having an error with the FEDEx model with the shipping price, however it is only when you goto the checkout section. Please see the below for the example of what is happening;

Step 1 of 3 - Delivery Information

FedEx Express
$383.16FedEx International Priority®
$311.42FedEx International Economy®

Step 2 of 3 - Payment Information

Your Total
$400.00Sub-Total:
$191.58FedEx Express (FedEx International Priority®):
-$200.00Group Discount:
$391.58Total:

Your Total
$400.00Sub-Total:
$155.71FedEx Express (FedEx International Economy®):
-$200.00Group Discount:
$355.71Total:

I have an unreleased version of this module which supports dimensional shipping, but does not require it. I also plan to add the ability to choose shipping methods to offer without having to edit the code directly. This will be released when the new Numinix website goes live this week.

I'd like a copy of the New Fedex addon.

Nothing I do removed the errors that show up.

Data sent to Fedex for Rating....

Am trying to integrate FEDEX XML. we are running 1.3.7. Does anyone know if this mod supports 1.3.7. We are getting this error:

[Error] => SimpleXMLElement Object
(
[Code] => 64344
[Message] => Invalid value in element RequestHeader/MeterNumber

so it appears to be a meter num retreival problem . We have left it set to "NONE"

Thanks in advance

1.3.7 heavily modded.

I also have tried both versions of the Fedex module. The XML module didn't return any shipping rates, only $0.00 in each row.

The Fedex module returns shipping costs to the "estimate shipping" window, but returns nothing at all at the "checkout" window. The Fedex option doesn't show at all in the checkout.

Anyone care to give me a shove here to alert me to what I've overlooked? It sure would be nice to offer Fedex shipping too!

FWIW, the store is at https://www.flyboyaccessories.com

DrByte:

This is a result of what may be a quirk in the FedEx module, reported a couple months ago.

The following may help ...

You can change your site's template operation by editing your custom tpl_checkout_shipping_default.php file:

line 64:// allows FedEx to work comment comment out Standard and Uncomment FedEx [B]//[/B] if ($quotes[$i]['id'] != '' || $quotes[$i]['module'] != '') { // FedEx if ($quotes[$i]['module'] != '') { // StandardMove the // from the 2nd line to the 3rd line, like this:```
// allows FedEx to work comment comment out Standard and Uncomment FedEx
if ($quotes[$i]['id'] != '' || $quotes[$i]['module'] != '') { // FedEx
[B]//[/B] if ($quotes[$i]['module'] != '') { // Standard

> I've only done very basic research on this, as I have no way to test the module.


DrByte's fix from several years back seems to have fixed the checkout page problem for me!  

Sorry to have posted a question before I exhausted all of the advice already posted.... even the really old stuff!

Thanks for the update on the solution that worked for you ... it is always a help to others ... :smile:

Now i use FEDEX SHIPPING - V1.4.1

I just install your Fedex Shipping module , at first ZC have NO any display about fedex, need change code

$this->title1

to $this->title

then have Fedex display, but all quotation is 0.00

Please see bubug model output:

Data sent to Fedex for Rating: 0,"25"10,"319407685"498,"5124725"8,"NY"9,"11729"117,"US"17,"59718"16,"MT"50,"US"75,"LBS"1116,"I"1401,"19.0"57,"12"58,"12"59,"12"116,"0"1529,"1"1415,"461.98"68,"USD"440,"Y"1273,"01"1333,"1"99,""
Data returned from Fedex for Rating: 0,"125"1376,"LBS"1377,"LBS"1092,"8"1133,"6"2399-1,"0"1273-1,"01"1274-1,"01"1090-1,"USD"1089-1,"01618"431-1,"N"1402-1,"19.0"1416-1,"116.45"1417-1,"9.15"1418-1,"11.64"1419-1,"113.96"1420-1,"0.00"194-1,"WED"195-1,"GTF"409-1,"17Jun09"2399-2,"0"1273-2,"01"1274-2,"03"1090-2,"USD"1089-2,"06112"431-2,"N"1402-2,"19.0"1416-2,"70.40"1417-2,"8.73"1418-2,"7.04"1419-2,"72.09"1420-2,"0.00"194-2,"THU"195-2,"GTF"409-2,"18Jun09"2399-3,"0"1273-3,"01"1274-3,"05"1090-3,"USD"1089-3,"01415"431-3,"N"1402-3,"19.0"1416-3,"101.55"1417-3,"9.01"1418-3,"10.16"1419-3,"100.40"1420-3,"0.00"194-3,"WED"195-3,"GTF"409-3,"17Jun09"2399-4,"0"1273-4,"01"1274-4,"20"1090-4,"USD"1089-4,"07179"431-4,"N"1402-4,"19.0"1416-4,"53.85"1417-4,"8.58"1418-4,"5.38"1419-4,"57.05"1420-4,"0.00"194-4,"FRI"195-4,"GTF"409-4,"19Jun09"2399-5,"0"1273-5,"01"1274-5,"90"1090-5,"USD"431-5,"N"1402-5,"19.0"1416-5,"16.98"1417-5,"8.30"1418-5,"0.00"1419-5,"25.28"3058-5,"5"1992-5,"0.00"2399-6,"0"1273-6,"01"1274-6,"92"1090-6,"USD"431-6,"N"1402-6,"19.0"1416-6,"16.98"1417-6,"8.66"1418-6,"0.00"1419-6,"25.64"3058-6,"5"1992-6,"0.00"99,""

Would you please help to check and advise asap?

Thanks & Best Regards,
Sunrise99

sunrise99:

Now i use FEDEX SHIPPING - V1.4.1

I just install your Fedex Shipping module , at first ZC have NO any display about fedex, need change code

$this->title1

to $this->title

then have Fedex display, but all quotation is 0.00

Please see bubug model output:

Data sent to Fedex for Rating: 0,"25"10,"319407685"498,"5124725"8,"NY"9,"11729"117,"US"17,"59718"16,"MT"50,"US"75,
"LBS"1116,"I"1401,"19.0"57,"12"58,"12"59,"12"116,"0"1529,"1"1415,"461.98"68,"USD"440,"Y"1273,
"01"1333,"1"99,""
Data returned from Fedex for Rating: 0,"125"1376,"LBS"1377,"LBS"1092,"8"1133,"6"2399-1,"0"1273-1,"01"1274-1,"01"1090-1,"USD"1089-1,
"01618"431-1,"N"1402-1,"19.0"1416-1,"116.45"1417-1,"9.15"1418-1,"11.64"1419-1,"113.96"1420-1,
"0.00"194-1,"WED"195-1,"GTF"409-1,"17Jun09"2399-2,"0"1273-2,"01"1274-2,"03"1090-2,"USD"1089-2,
"06112"431-2,"N"1402-2,"19.0"1416-2,"70.40"1417-2,"8.73"1418-2,"7.04"1419-2,"72.09"1420-2,
"0.00"194-2,"THU"195-2,"GTF"409-2,"18Jun09"2399-3,"0"1273-3,"01"1274-3,"05"1090-3,"USD"1089-3,
"01415"431-3,"N"1402-3,"19.0"1416-3,"101.55"1417-3,"9.01"1418-3,"10.16"1419-3,"100.40"1420-3,
"0.00"194-3,"WED"195-3,"GTF"409-3,"17Jun09"2399-4,"0"1273-4,"01"1274-4,"20"1090-4,"USD"1089-4,
"07179"431-4,"N"1402-4,"19.0"1416-4,"53.85"1417-4,"8.58"1418-4,"5.38"1419-4,"57.05"1420-4,
"0.00"194-4,"FRI"195-4,"GTF"409-4,"19Jun09"2399-5,"0"1273-5,"01"1274-5,"90"1090-5,"USD"431-5,
"N"1402-5,"19.0"1416-5,"16.98"1417-5,"8.30"1418-5,"0.00"1419-5,"25.28"3058-5,"5"1992-5,
"0.00"2399-6,"0"1273-6,"01"1274-6,"92"1090-6,"USD"431-6,"N"1402-6,"19.0"1416-6,"16.98"1417-6,
"8.66"1418-6,"0.00"1419-6,"25.64"3058-6,"5"1992-6,"0.00"99,""

Would you please help to check and advise asap?

Thanks & Best Regards,
Sunrise99Did you look at the posted solution just above your post.. Sounds like the same problem.. May be the same solution..

Hi DivaVocals,
Thanks for your reply. I try all solution and can't fix it.

Best Regards,

We had another bug to fix which is now completed so we'll correct the SQL error for anyone not using the dimensional shipping in addition to renaming title1 to title and then release the new version tonight.

I am in the process of migrating from 1.3.7 to 1.3.8. Can not make the 1.4.1 Fedex module to work. The UPS and USPS are OK. As soon as I install Fedex while running shipping estimator I am getting this "1054 Unknown column 'products_length' in 'field list'
in:
[SELECT products_length, products_width, products_height, products_ready_to_ship, product_is_always_free_shipping FROM zen_products WHERE products_id = 47 LIMIT 1]"
Enable Dimensions? is set to False.
TIA

hi. i'm running 1.3.8a with fexed mod 1.4.1. i was having the problem of fedex not showing up on the checkout page. i did the table1->table fix but now i'm getting the error below. any ideas?
thank. paul.

1064 You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near ':8156325fdbe48dbd415939aa043c72ba LIMIT 1' at line 1
in:
[SELECT products_length, products_width, products_height, products_ready_to_ship, product_is_always_free_shipping FROM zen_products WHERE products_id = 33:8156325fdbe48dbd415939aa043c72ba LIMIT 1]

this is a comment to my problem posted above. i've figured out that the error only comes up when there's a item with an attribute in the shopping cart. still. any ideas how to fix this issue?

WHERE products_id = " . $product['id']

replace with:

WHERE products_id = " . (int)$product['id']

I also just replaced:

$data .= '116,"' . $this->num_pieces . '"'; // Total number of pieces

with

$data .= '116,"' . $shipping_num_boxes . '"'; // Total number of pieces

I'm still not sure if it's working right because I'm having issues accessing my client's account on the FedEx site. But at least it's giving me rates now that are closer to reality. (Before I did that second replace, I got a quote of $238.25 for shipping a half-pound box that happened to have 25 small items in it.)