Image Handler 2 (for ZC v1.3.8 ONLY) Support

[Elfboy]

I have the same problem as some others but haven't found the solution (this thread is over a 1000 posts and I've only read about 200!!!)..... additional images don't show up in the product info page.

The other images are there when I turn IH2 off but disappear when it is on. I can also see them in the IH2 Manager.

This is a fresh install/upgrade from 1.2.7 where the old version of IH was working fine.

One other thing I noticed: for the one product that I added images for using IH2, when I look at it under IH2 admin there are no "delete" buttons under the med and large sizes. All the other products (which were added under 1.2.7) have "delete" buttons.

Help!

[jettrue]

I have the same problem as some others but haven't found the solution (this thread is over a 1000 posts and I've only read about 200!!!)..... additional images don't show up in the product info page.

The other images are there when I turn IH2 off but disappear when it is on. I can also see them in the IH2 Manager.

This is a fresh install/upgrade from 1.2.7 where the old version of IH was working fine.

One other thing I noticed: for the one product that I added images for using IH2, when I look at it under IH2 admin there are no "delete" buttons under the med and large sizes. All the other products (which were added under 1.2.7) have "delete" buttons.

Help!

Look around page 100-ish of this thread, I posted a fix for that issue.

[Elfboy]

Thanks jettrue,
That worked! (but not immediately for some reason )

But I'm still getting the strange behavior with the recently added product images. All the old images (added with the old version of IH) are now showing up but the one I just added is not. Also the "delete" buttons under IH2 Manager (medium and large) do not show up for the new product.

Any ideas?

[jettrue]

Thanks jettrue,
That worked! (but not immediately for some reason )

But I'm still getting the strange behavior with the recently added product images. All the old images (added with the old version of IH) are now showing up but the one I just added is not. Also the "delete" buttons under IH2 Manager (medium and large) do not show up for the new product.

Any ideas?

Can you send me a link with the issue?

As far as the delete buttons, from the way I understand IH2, there shouldn't be delete buttons for all three images. Deleting one should delete them all, right? Since you only have to upload one, and IH2 creates all the sizes for you?

[Elfboy]

So your IH Manager doesn't look like this:

I haven't tried the delete button...

Here's the new product I'm having trouble with:
http://naturalhistoryonline.com/cat/...products_id=63

I deleted all images for it and added them back in. I thought it was working but I've added 4 images and only 3 are showing.

[jettrue]

So your IH Manager doesn't look like this:

I haven't tried the delete button...

Here's the new product I'm having trouble with:
http://naturalhistoryonline.com/cat/...products_id=63

I deleted all images for it and added them back in. I thought it was working but I've added 4 images and only 3 are showing.

Mine does look different, however I only upload one image, and let IH2 do the rest. Do you upload a small medium and large, or only one image?

[Justwade]

Mine does look different,

himmmm...

There a lot of posts here so forgive me if the answer is obvious or was already addressed,

That image of Elfboy' post looks different than mine too. That image shows "Version 2", mine does not show any version. I went to breakmyzencart, and his demo image has "Version 2.0-rc1".

I use IH2 with Zen 1.37, my images on the site are working properly so I am a little concerned with breaking IH when I can leave it alone for awhile longer, I got others problems right now. But my admin is giving me trouble and if I add new images I will need to address that.

Was there some fixes that I don't know about that I should just upgrade into?

[Elfboy]

Do you upload a small medium and large, or only one image?

Yes I just upload one image (about 900 px wide), the "default", and let IH do the resizing. In fact that's the main reason I use IH.

The most up to date version of IH is the one available in the Downloads section as the author of the mod is no longer able to support it.

Good info to know. The Downloads section description says "Make sure, you always get the newest version by visiting http://breakmyzencart.com/image-handler"
Maybe someone can change the description?

I downloaded both and compared modification dates and used the most recent (I think it was from the Downloads section!)