Nixaks Sagepay Form Module

i am having some issues trying to install the Sage payment module for zen cart. Are there 2 different sage companies and i found 2 modules on Zen cart add ons. Your Sage module is for what company url. I am trying to install for this :https://www.sagepayments.com.

Is that the same sage payment module you all are discussing on the thread? If so, the requirements :

REQUIREMENTS:

*Net1 merchant credit card account

*cURL is required and MUST be compiled into PHP with SSL support

*SSL Certificate

*SagePay Form account

*cURL is required and MUST be compiled into PHP with SSL support

*SSL Certificate

*Port 43924 open for bi directional communication

Just a few questions ....

I have a sagepay account, but when I try the test mode, it tells me I don't have the right Vendor Name ... but I am using my Sagepay Vendor name ... any ideas about what is happening?

Also can you explain how I make sure I have the above requirements ....

I am a newbie to all this but learning loads and loads .... Thank you to everyone who replies to questions. You are what makes this a GREAT community.

Many thanks.

Gillian

Hi

Below is the error message I am getting when I try to buy something through my site. Any ideas why this might be?

Many thanks

Gillian

*This transaction attempt has failed. We are unable to redirect you back to the web store from which you were purchasing. The details of the failure are given below.

Status: INVALID

Status Detail: 5030 : Unable to decrypt the request message. This might be caused by an incorrect password or invalid encoding.
*

Hi Nixlak,
Great module thanks for that but I have a slight problem.
If you could help I would be very gratful.

Sagepay is throwing back an error when trying to complete orders to the United States.
"The billing state is required"

I have noticed that lines 181 "Billing State" has been commented out on the sagepay_form.php , is there a reason for this as I think it may be needed?

I have tried un-commenting it along with line 195 "Delivery State" and it seems to work but you have to change the Zone Names in Zencart to 2 letter codes otherwise you get "The billing state is too long".
This obviously does not look good when a customer is trying to choose what state they live in??

Can you shed any light on what promises to be another great module?

Cheers

Hi all, Iv'e not been keeping track recently due to a death in the family ..... however I will look into your comments tomorrow once i've has some sleep.

Tammygrant - this module is for Sage Pay who used to be Protx, their website is http://www.sagepay.com hope this helps

Hi all, thankyou for your messages :D

Asarfraz - thankyou for your message as it will help me in writing the decode side of the module (my biggest problem) I will adjust the coding as you described

Please note - the current module does not decode the encryted info sent back via SagePay as it's something I learned about after writing the module :blink:

Hairx - I commented out the billing and delivery state from the module as it wasn't required for where I live in the UK and it did not reconise any states other then America, however the next version does include a switch in the admin side to allow this to be turned on or off. I will look in to the zone names / codes to see if I can come up with a solution.

SagePay's customer service told me that all they really need is the first line of the address and the post/zip code ... is this different for American websites?

I'm off to go and dig out all my coding :blink: and I will try to update you all soon.

Thankyou
Nixak

Update - just spoke to Sagepay who have confirmed that the billing/delivery state is not needed unless the order is American .... so I will try to fix this asap

Hi Nixak
I am in the uk as well infact i am just down the road to you lol
I have a uk cart but also sell worldwide
I have a few customers from the states Hence how i found out the problem.
It would be great if you could look into the mod as when i un-commenting & changed the Zone Names in Zencart to 2 letter codes (which worked for US orders) all other countries stopped working

Thanks for taking the time :clap:

Hi all, after lots of headaches I am pleased to announce version 1.3 is on its way :clap: unfortunatly there seems to be a problem with updating contributions on the site at the moment but I will have it added as soon as it's fixed.

Changes for Version 1.3 :cool:

US state codes are now sent to SagePay and the module detects whether to send the state code or not i.e if the address is not American then the state codes are not sent (as they would cause an error) this applies to both the billing and delivery address even if they are different. Thankyou hairx for pointing out this problem.

Basket details can now be sent to SagePay. YES you read it right :P I have managed to get this working and it's been tested out on a live website.

I re-coded both the currency and transaction type switches so as to make them more intuative and so as they conform to Sagepay's rulings better.

Coded in the SendEmail flag. Now you can decide whether the emails that Sagepay sends out after a successful or un-succsessful transaction go to just yourself (the vendor), yourself and the customer or to niether.

Installation notes:

I highly advise that you backup both your website and database before following the instructions below. You may wish to put your site in to maintaince mode whilst carrying out this update.

1. From your admin panel (modules/payment) highlight the sagepay module and remove it via the remove button. MAKE SURE you have your vendor name and password stored somewhere.

2. Using an FTP client or your server side file access delete the following two files:

i) includes/modules/payment/sagepay_form.php
ii) includes/languages/english/modules/payment/sagepay_form.php

3. Install version 1.3 - the files are laid out correctly in the folders and there should be no files overwritten.

4. in your Zen-Cart admin go to modules/payment and install the sagepay module ensuring to enter your correct vendor name and password.

5. Enjoy :clap::clap:

Failure to delete the old sagepay_form.php files could cause errors and prevent the module from working correctly.

Version 1.3 has been tested on both a vanilla 1.3.8a install and on a live 1.3.8a website.

My new 1.3 version of the module was succesfully uploaded yesterday morning and will hopefully be realeased for download within the next few days. Obviously if the Zen-Cart team are very busy this could take a little while longer but I do have my fingers crossed for you all.

If you have any suggestions for improvements or any comments I would be glad to see what I can do.

Techiescot:

Hi

Below is the error message I am getting when I try to buy something through my site. Any ideas why this might be?

Many thanks

Gillian

---

*This transaction attempt has failed. We are unable to redirect you back to the web store from which you were purchasing. The details of the failure are given below.

Status: INVALID

Status Detail: 5030 : Unable to decrypt the request message. This might be caused by an incorrect password or invalid encoding.
*

I am getting the exact same error message - can anyone help?

I'm pretty sure I'm using the correct vendor name and the password I'm using is the administrators one SagePay issued me with when the account was set up.

PLEASE HELP!!

I have downloaded and installed the very latest version of Zen Cart and also installed the SagePay Form payment module.

However, I've tried to do a couple of test transactions and when I go to checkout I keep getting directed to the following URL with this error message:

--
https://test.sagepay.com/gateway/service/vspform-register.vsp

This transaction attempt has failed. We are unable to redirect you back to the web store from which you were purchasing. The details of the failure are given below.

Status: INVALID

Status Detail: 5030 : Unable to decrypt the request message. This might be caused by an incorrect password or invalid encoding.

--

Any idea what is causing this?
I'm pretty sure the vendor name I'm entering via the admin of my zen cart is correct, but what password do I need to enter?
The password I'm using is the administrator one SagePay issued me with when we set the account up.

PLEASE HELP!

I have downloaded and installed the very latest version of Zen Cart and also installed v1.2 od the SagePay Form payment module.

However, I've tried to do a couple of transactions in test mode and when I go to checkout I keep getting directed to the following URL with this error message:

--
https://test.sagepay.com/gateway/service/vspform-register.vsp

This transaction attempt has failed. We are unable to redirect you back to the web store from which you were purchasing. The details of the failure are given below.

Status: INVALID

Status Detail: 5030 : Unable to decrypt the request message. This might be caused by an incorrect password or invalid encoding.

--

Any idea what is causing this?
I'm pretty sure the vendor name I'm entering via the admin of my zen cart is correct, but what password do I need to enter?
The password I'm using is the administrator one SagePay issued me with when we set the account up.

PLEASE HELP!

moderator's note - duplicate posts and threads have been merged here. Do not repost the same problem in multiple threads.

apovey:

I have downloaded and installed the very latest version of Zen Cart and also installed the SagePay Form payment module.

However, I've tried to do a couple of test transactions and when I go to checkout I keep getting directed to the following URL with this error message:

--
https://test.sagepay.com/gateway/service/vspform-register.vsp

This transaction attempt has failed. We are unable to redirect you back to the web store from which you were purchasing. The details of the failure are given below.

Status: INVALID

Status Detail: 5030 : Unable to decrypt the request message. This might be caused by an incorrect password or invalid encoding.

--

Any idea what is causing this?
I'm pretty sure the vendor name I'm entering via the admin of my zen cart is correct, but what password do I need to enter?
The password I'm using is the administrator one SagePay issued me with when we set the account up.

PLEASE HELP!

Hi apovey, this sounds like you have entered the wrong password into the admin side of the payment module.

Before you use the module it sets up automaticly to use the simulater, the password for this will only be shown to you after you first try to use it, its shown on sagepays site that you are taken to.

If your going for test mode then the password is the encryption password that SagePay have supplied you with amongst your paperwork. The administrator password is for when you log in to your sagepay admin on their site.

Hope this helps
Nixak

Nixak:

Hi apovey, this sounds like you have entered the wrong password into the admin side of the payment module.

Before you use the module it sets up automaticly to use the simulater, the password for this will only be shown to you after you first try to use it, its shown on sagepays site that you are taken to.

If your going for test mode then the password is the encryption password that SagePay have supplied you with amongst your paperwork. The administrator password is for when you log in to your sagepay admin on their site.

Hope this helps
Nixak

Thanks.
I'm setting the zen cart site up for someone, so I'll get them to check their paper work for the appropriate password.

Hi all,

I just wanted to let you all know that you can now also find both myself and my work on my website (link in signature) as well as here on Zen-Cart :D

Hi Nixak,

Thank you in advance for your work. We're thinking of switching over to Sagepay at the moment - Do you have any idea on the timeframe for releasing the 1.3 fixed up version. :smile:

Hi PatF,

Version 1.3 has been uploaded to zen-cart and my website (link is in my sig), however the zen team must be very busy at the moment as it's been over a week and they haven't released it yet. I am sure they will get round to it as soon as they can.

Hope this helps
Nixak

Hi Nixak,

Had a quick look there - all that was downloaded from your forum area was an empty folder though. :dontgetit