Image Handler 3 Support Thread (for ZC v1.3.9)

andrewnguyen:

:frusty: OH MAN.

I found out what i've done. I have installed the Dual Pricing 1.7c module and thats what make the Image Handler 3 "Action button" gone disapear.:blush:

Please help. I have done this on my actual site and wasn't aware of this little button.

Very much appreciated.

Andrew.We actually can't help you with issues related to another mod.. (Sorry..) However if I had to hazzard a guess I'd say that the Dual Pricing mod modifies some of the same files used by IH3 and you are wiping out the IH3 changes because you are not merging these modifications. Using a file merging program you need to merge the changes between any files Dual Pricing has in common with IH3.. I'm afraid we can't be of much more help as the issue here is not IH3 at all.. It is an incorrect install of your Dual Pricing mod..

How can I remove the Image Hover preview? The Client don't want it. They love everything except this (picky).

DivaVocals:

As long as you are going to be doing your own web development, especially using a tool like Zen Cart, you are going to have to be prepared to learn some new skills. Otherwise might I suggest you give some thought to hiring someone to help you with your installs/configurations.. Might be worth the investment to pay someone to help you with tasks you may find challenging.

I'm gonna assume you didn't mean this to sound as snarky as it comes across..

That said, I'm sure you can appreciate that FREE modules are generously contributed by VOLUNTEERS. These volunteers contribute Zen Cart updates/enhancements/mods in their free time without any kind of compensation for their time and effort.. The volunteers who worked on IH3 didn't "make the additional_images.php for the 2 different ones" because they felt that:
A. The addition of the instructions on how to integrate the two most popular lightbox solutions with Image Handler (instructions which were not included in previous versions of Image Handler BTW) was MORE than sufficient to help guide folks through executing this process.
B. It was MORE important to devote their volunteer effort into improving IH3's functionality and documentation.

Now it's open source software.. So there's nothing stopping someone else from volunteering to add the modified additional images files needed to use IH3 with Fual Slimbox or Zen Lightbox to the IH3 fileset (and the later is not necessary since the IH3 readme file CLEARLY indicates that the additional images file that comes with ZLB should REPLACE the one that comes with IH3).

That said, a constructive question on where you are having issues will go a long way to getting your issue resolved versus posting gripes about what SHOULD or SHOULD not be included in the IH3 fileset.

OMG I am sorry! It wasn't meant to be snarky or rude. New customers being too damn picky got on my nerves......I was venting and typed in wrong tab That was suppose to go into my WD Journal!

tncproweb:

How can I remove the Image Hover preview? The Client don't want it. They love everything except this (picky).Simply turn off the image hover in the image configuration.. (Image hover settings are covered in the readme)

DivaVocals:

Simply turn off the image hover in the image configuration.. (Image hover settings are covered in the readme)

Ok thanks. I saw that but wasn't sure where it was located at! :smile:

Got it......DUH on ME ! Forgot to check the configuration file!

tncproweb:

Ok thanks. I saw that but wasn't sure where it was located at! :smile:
You're welcome, but all of this really is covered in the readme..

From the readme:

CONFIGURATION

Image Handler3 works out of the box. There’s no need to  configure anything if you are ok with the presets. If you want to change  the way   Image Handler deals with your images go to **Configuration > Images**.> Images Configuration page  Go to **Configuration > Images** page inside your admin interface. 

{Screen shot of image configuration}> Zooming (fancy hover effect) When selecting this feature for small images, the medium or large image (depending on your admin settings) pops up whenever you move your mouse cursor over the small image.

{Screen shot of section from image configuration}

I got this error after install new module:

Warning: strstr() [function.strstr]: Empty delimiter in /home2/royalty3/public_html/includes/classes/bmz_image_handler.class.php on line 130

Warning: strstr() [function.strstr]: Empty delimiter in /home2/royalty3/public_html/includes/classes/bmz_image_handler.class.php on line 130

any help or suggestion to fix it?

sunrise99:

I got this error after install new module:

Warning: strstr() [function.strstr]: Empty delimiter in /home2/royalty3/public_html/includes/classes/bmz_image_handler.class.php on line 130

Warning: strstr() [function.strstr]: Empty delimiter in /home2/royalty3/public_html/includes/classes/bmz_image_handler.class.php on line 130

any help or suggestion to fix it?

are you sure the directory is permissioned right....755 or 777

is everything installed into the right folders

Hello than k you everyone for your answers

I have fixed my issue,

Thank you

yes, bmz_cache is 777 now. I also try to 755 , still have this warining.

sunrise99:

yes, bmz_cache is 777 now. I also try to 755 , still have this warining.

could you post a link to your store

a list of how your image settings are done

that line in the code has to do with the size large...does it have any effect in the store end at all

does the mod work in other respects?

DarkAngel:

could you post a link to your store

a list of how your image settings are done

that line in the code has to do with the size large...does it have any effect in the store end at all

does the mod work in other respects?

Many thanks for your support, please check your message.

Hi just installed image handler 3 then noticed I have multiple images though :oops: went back to delete them but all I'm getting is this error message
Error!

Unable to determine the page link!

Function used:

zen_href_link('', '', 'NONSSL')

please help

discoverytdi:

Hi just installed image handler 3 then noticed I have multiple images though :oops: went back to delete them but all I'm getting is this error message
Error!

Unable to determine the page link!

Function used:

zen_href_link('', '', 'NONSSL')

please help

I am sorry but you will not be getting very good help if you make everyone guess.

It has been mentioned MANY times that to get good help posters need to place a link to their store so that the helpers may go see with their own eyes what is happening.

so please post your store software version and store link in the thread to get help that will benefit you to fix it sooner.

DarkAngel:

I am sorry but you will not be getting very good help if you make everyone guess.

It has been mentioned MANY times that to get good help posters need to place a link to their store so that the helpers may go see with their own eyes what is happening.

so please post your store software version and store link in the thread to get help that will benefit you to fix it sooner.
:oops: Managed to sort most through image handler just left with a few products like this on with multiple images http://www.rvsolarsystems.co.uk/store/index.php?main_page=product_info&cPath=2&products_id=4
thease are the ones I'm getting the error message from when I try to solve it through image handler I know I've screwed up somewhere but don't want to make it worse
zen1.39H

discoverytdi:

:oops: Managed to sort most through image handler just left with a few products like this on with multiple images http://www.rvsolarsystems.co.uk/store/index.php?main_page=product_info&cPath=2&products_id=4
thease are the ones I'm getting the error message from when I try to solve it through image handler I know I've screwed up somewhere but don't want to make it worse
zen1.39H

well I kill my own store occasionally so I am well aware of messing things up royal...lol

well you should get better help than what I can off but I am confused a bit. I went to the link and I see the main product image...opens to a nice sized larger image to view details well.

at the bottom of the page I see the additional image--when you said you have multiple images i thought you meant more than 1 of the same image at the bottom....I see only the one additional image that is slightly different than the top one.

I also noticed that when the additional image is clicked on to view it does not show...see pic posted

did you make sure all your files are in their correct places on the server?

have you tried going to admin/tools/IH3/itw own admin link and clearing the cache? Or going to the server and deleting all folders in the bmz_cache folder?

when I hover over the image it does not show the link as bmz_cache BUT when I choose to view image when right-clicked it does show the right path...confusing to me but then I confuse easy.

DarkAngel:

well I kill my own store occasionally so I am well aware of messing things up royal...lol

well you should get better help than what I can off but I am confused a bit. I went to the link and I see the main product image...opens to a nice sized larger image to view details well.

at the bottom of the page I see the additional image--when you said you have multiple images i thought you meant more than 1 of the same image at the bottom....I see only the one additional image that is slightly different than the top one.

I also noticed that when the additional image is clicked on to view it does not show...see pic posted

did you make sure all your files are in their correct places on the server?

have you tried going to admin/tools/IH3/itw own admin link and clearing the cache? Or going to the server and deleting all folders in the bmz_cache folder?

when I hover over the image it does not show the link as bmz_cache BUT when I choose to view image when right-clicked it does show the right path...confusing to me but then I confuse easy.

Thats whats got me confused I'm tempted to try deleting the image from the product but although I have more bacups than I can shake a stick at I'd rather not if it will totally balls it up even more

DarkAngel:

when I hover over the image it does not show the link as bmz_cache BUT when I choose to view image when right-clicked it does show the right path...confusing to me but then I confuse easy.and when you hover over the images show on the products detail page it will NEVER show the URL for the image in the bmz_cache folder. The URL you see when you hover the main product or additional images on the product detail page is the link to the pop-up window which will THEN contain the large image. If you right click the image from the popup window THEN you should see the large being served up from the bmz_cache folder.

That said if you right click the main product image (medium image) and the additional image thumbnails (small image), they should be served up from the bmz_cache folder.

Update just went back into admin deleted the images in the product pages fine but when I reinstall the images it picks up the image I want plus the image from a different product :frusty: