Image Handler 3 Support Thread (for ZC v1.3.9)

[shartlesville]

@landin
i am assuming the following
Images are being created in the bmz_cache folders, and are visible when viewed via your hosting control panel, BUT the image can't be viewed when you try to view them on the site OR via a direct link in the browser?

Try this
try deleting the .htaccess file out of the bmz_cache and see if that makes a difference,

If it does make a difference, copy the ,htaccess file out of images into the bmz_cache (the 2 files are identical, but for some bizarre reason this has fixed some peoples problems)

FINALLY!!!!!!!

I have been working all day, installing, uninstalling, reading and re-reading the README file to see what I missed, quadruple checking everything, in addition to reading through 30 pages of questions/answers trying to get this mod to work and this was a very simple solution!

Please consider making it a sticky or listing it in the Troubleshooting section of the README file.

THANK YOU!!!!

[DivaVocals]

FINALLY!!!!!!!

I have been working all day, installing, uninstalling, reading and re-reading the README file to see what I missed, quadruple checking everything, in addition to reading through 30 pages of questions/answers trying to get this mod to work and this was a very simple solution!

Please consider making it a sticky or listing it in the Troubleshooting section of the README file.

THANK YOU!!!!

Glad you found the answer to your issue..


Can't make ONE POST a sticky.. Even off we could there's no need to make it a sticky since it's truly a ONE OFF kind of situation.. The entire IH3 support thread is a sticky post, and this issue doesn't happen to everyone (just certain hosting configurations for unknown reasons).. Besides admins aren't gonna let me update IH3 just to add one line for a one off issue to the readme..

[shags38]

Hi - my issue is images in product pages - default and additional - have disappeared since I installed IH3.

All images are present on the home page, and indeed on the first listing page of a category however beyond that images are missing but the text description for the image is showing.

Also - prior to installing IH3 I had installed Google Merchant after which when adding a new product I could not get images to load ("No Picture Available"). No Configuration changes were made to images, new listing, all listings etc.

Subsequent to installing IH3, I can add images to new product listing AFTER saving it (without an image) and by then going to Tools, IH3 and inserting images - problem is that the default image does not show up in the product page, only the additional images do. An error message says could not load default image albeit the default image shows up with all the additional images in the box (in Tools).

So Iam slowly but surely pulling out the little hair I have left.

Any and all assistance appreciated.

cheers,
Mike

[DarkAngel]

Hi - my issue is images in product pages - default and additional - have disappeared since I installed IH3.

All images are present on the home page, and indeed on the first listing page of a category however beyond that images are missing but the text description for the image is showing.

Also - prior to installing IH3 I had installed Google Merchant after which when adding a new product I could not get images to load ("No Picture Available"). No Configuration changes were made to images, new listing, all listings etc.

Subsequent to installing IH3, I can add images to new product listing AFTER saving it (without an image) and by then going to Tools, IH3 and inserting images - problem is that the default image does not show up in the product page, only the additional images do. An error message says could not load default image albeit the default image shows up with all the additional images in the box (in Tools).

So Iam slowly but surely pulling out the little hair I have left.

Any and all assistance appreciated.

cheers,
Mike

have you made sure all files got uploaded to their proper places?

just to make sure go to admin/configuration/images just to ensure the settings are still the same

and as always folks----please give link to naughty store and am assuming you are using zencart 1.3.9h

have you tried disableing the google mod to see if IH3 works with it not on.

[ScriptJunkie]

Your image issues began prior to installing IH3. Suggest uninstalling/disabling Google Merchant to see if IH3 works. You will also need to look at both mods to see if they have any common files that need merging.

If IH3 works without Google Merchant installed, you will need to get support for this issue on the Google Merchant support thread.

Hi - my issue is images in product pages - default and additional - have disappeared since I installed IH3.

All images are present on the home page, and indeed on the first listing page of a category however beyond that images are missing but the text description for the image is showing.

Also - prior to installing IH3 I had installed Google Merchant after which when adding a new product I could not get images to load ("No Picture Available"). No Configuration changes were made to images, new listing, all listings etc.

Subsequent to installing IH3, I can add images to new product listing AFTER saving it (without an image) and by then going to Tools, IH3 and inserting images - problem is that the default image does not show up in the product page, only the additional images do. An error message says could not load default image albeit the default image shows up with all the additional images in the box (in Tools).

So Iam slowly but surely pulling out the little hair I have left.

Any and all assistance appreciated.

cheers,
Mike

[Dan123]

Hi everybody!
I am using IH for my shop and I was wondering if anybody has seen a module or knows how to make IH show a second image on a mouse hover on the first image in a catalog.
Here is an example - http://www.yoursclothing.co.uk/C/All_Dresses-(18).aspx
Just hover on any image and the second one will appear.
Thank you!

[DivaVocals]

Hi everybody!
I am using IH for my shop and I was wondering if anybody has seen a module or knows how to make IH show a second image on a mouse hover on the first image in a catalog.
Here is an example - http://www.yoursclothing.co.uk/C/All_Dresses-(18).aspx
Just hover on any image and the second one will appear.
Thank you!

You really should post this question in a NEW thread as it's not really related to support for IH3..

[digidiva-kathy]

This file:

admin/functions/extra_functions/functions_bmz_image_handler.php

is causing my admin home page to go blank. I had it happen three times and finally uploaded the admin folder all over again, then uploaded the files one at a time to see which was the culprit. This is a brand new Fantastico installation of 1.3.9h. When I deleted this file, the admin page came back.

[sofasurfer]

The whole point of Image Handler is to save room in my file manager aa well as to have smaller images so my page loads faster.

So, I sell photos. Images on my site are the images I sell. I am processing as thus... I have a folder on my pc which holds my large (4-20mg) images that I make prints from. I also have a folder which holds reduced size images (100-200kb) which I upload to file manager and which are in turn processed by Image Handler and displayed on my website.

Is the above method preferred or is there a better way?

[caska]

Just upgraded to IH3 from IH2 but I'm still having problem with my zoom. First and second images zoom just fine however the rest of the piccy don't zoom anymore. Anyone knows what the prob with this?
My site is: http://pinkoholic.co.uk

Thanks!